Kentix KMS-DOOR-B manual

Kentix KMS-DOOR-B
7.2 · 1
PDF manual
 · 132 pages
English
manualKentix KMS-DOOR-B

7.2.Operation KeyPad

With the KeyPad you have the possibility to switch either a single zone or the complete system:
Switch single zone
Enter the number of the zone (1-30), then press one of the function keys. Now enter your 4 digit PIN to finish
the action.#
The function will be triggered directly after the input of the last digit. Pressing a button is always signalized by a
sound. The selected function is signalized by a LED in the function (arm/disarm) button.
Switch pre-assigned zone or all zones together
By simply pressing one of the function keys (arm/disarm) and the entering of your PIN
the pre-assigned zone is switched. Please note that a user needs the correct
permissions for switching.
To switch the complete system (all zones), the KeyPad has to be assigned to „All
Zones“ via the ControlCenter. Alternatively - also when a separate zone is assigned
as default - the complete system can be switched by preselecting „00“ as zone
number.
The LED‘s flash corresponding to the possible inputs.
Operation via RFID
To operate the KeyPad a RFID card can be used instead of the 4-digit PIN.
#
Activate the KeyPad and enter either the zone number or directly press one of the function keys.
Now place you RFID card in directly in front of the X.
Arming - leave the room
OK :
5 seconds acoustic beep signal, LED lights constant, MultiSensors signal acoustically
according to the arming buzzer time.
Not OK :
3 seconds constant acoustical signal. All LEDs are flashing.
Disarming - enter the room
OK :
1 second constant acoustic signal, LED lights constant, MultiSensors signal also with 1
second acoustic signal.
RFID reader
Select the desired function (arm, disarm, enter zone number) and place the RFID card in
front of the reader. The function is executed immediately after the correct read.
Page (11-2017, subject to change) kentix.com53
IMPORTANT!
Via the KeyPad only „armed-active“ alarms can be switched. All alarms of the type „always-active“ are always
triggered, independent from the armed-disarmed state.

KeyPad-Touch & Accessories

Manual

View the manual for the Kentix KMS-DOOR-B here, for free. This manual comes under the category door / window sensors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Kentix KMS-DOOR-B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kentix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kentix KMS-DOOR-B specifications

Below you will find the product specifications and the manual specifications of the Kentix KMS-DOOR-B.

General
BrandKentix
ModelKMS-DOOR-B | KMS-DOOR-B
Productdoor / window sensor
EAN4260300580404
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Connectivity technologyWireless
LED indicatorsYes
Alarm decibels65 dB
Operating frequency2300 MHz
InterfaceZigBee
Power
Battery technologyLithium-Ion (Li-Ion)
Number of batteries supported1
Battery voltage3.6 V
Weight & dimensions
Width62 mm
Depth62 mm
Height27 mm
Weight50 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kentix KMS-DOOR-B below.

What is the weight of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a weight of 50 g.

What is the height of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a height of 27 mm.

What is the width of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a width of 62 mm.

What is the depth of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a depth of 62 mm.

Is the manual of the Kentix KMS-DOOR-B available in English?

Yes, the manual of the Kentix KMS-DOOR-B is available in English .

Is your question not listed? Ask your question here

No results