Kentix KMS-DOOR-B manual

Kentix KMS-DOOR-B
7.2 · 1
PDF manual
 · 132 pages
English
manualKentix KMS-DOOR-B

4.15. MIB for SNMP-Systems

For the AlarmManager-PRO a MIB (Management Information Base) is available, which describes the
information that can be requested or modified by a SNMP-System (z.B. PRTG, OpManager or WhatsUp Gold).
The single values in it are identified and requested via the OID (Object Identifier). Every value has his own
specific OID.
The following list shows the structure of the AlarmManager-MIB and gives an overview of the values that can be
requested:
state
- alarm1
- alarm2
- ...
multisensors
multisensor01
- sensorname01
- temperature01
- humidity01
- dewpoint01
- co01
- motion01
- digitalin101
- digitalin201
- digitalout201
- comError01
...
multisensor100
#
ext-module
modul01port01
- portname
- portstate
...
modul06port16#
server-monitoring
server01
- servername01
- ...
- serverstate01
...
server20
alarm-zones
alarmzone01
- alarmzonename01
- alarmzonestate01
- alarmzonealarm01
...
alarmzone30!
Page (11-2017, subject to change) kentix.com23
Examples for the OID:
AlarmManager OID: .1.3.6.1.4.1.37954.1
Query branch „state“: .1.3.6.1.4.1.37954.1.1
Object „alarm1“: .1.3.6.1.4.1.37954.1.1.4.0 - shows the actual state for alarm 1 (armed-active)
Query branch multisensors: .1.3.6.1.4.1.37954.1.2
Lower branch multisensor01: .1.3.6.1.4.1.37954.1.2.1
Objekt „temperature01“: .1.3.6.1.4.1.37954.1.2.1.2.0 - shows actual temperature value of the 1st MultiSensor
state - System state:
Query branch of the AlarmManagers general system state.
Delivers the actual state as shown in the Web-Interface or
the Dashboard of the ControlCenter (e.g. Arm/Disarm,
Alarm1 (Armed-Active), Alarm2 (Always-Active), Fire, Server
state,...).
multisensors - MultiSensors RF/LAN:
Query branch for the values of all connected MultiSensors
(the branch shows all 100 maximum possible Sensors).
All values are displayed as integers, whereas temperature
and dew point are increased by a factor of 10, to consider
one more decimal place. This has to be taken into
consideration in the requesting SNMP-System.
ext-module - Module for external alarms:
Query branch for the In- and Outputs of the external modules
KIO7052/3.
Shows the configured name and the actual alarm state for
every In- and Output respectively at Outputs the switched
state.
server-monitoring - State of the monitored Servers
Query branch of the configured servers to be monitored.
Shows the configured name, IP-address and port of the
service to be monitored, the response time in milliseconds
and the alarm state (0-OK, 1-not reachable) for every server.

The AlarmManager

Manual

View the manual for the Kentix KMS-DOOR-B here, for free. This manual comes under the category door / window sensors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Kentix KMS-DOOR-B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kentix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kentix KMS-DOOR-B specifications

Below you will find the product specifications and the manual specifications of the Kentix KMS-DOOR-B.

General
BrandKentix
ModelKMS-DOOR-B | KMS-DOOR-B
Productdoor / window sensor
EAN4260300580404
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Connectivity technologyWireless
LED indicatorsYes
Alarm decibels65 dB
Operating frequency2300 MHz
InterfaceZigBee
Power
Battery technologyLithium-Ion (Li-Ion)
Number of batteries supported1
Battery voltage3.6 V
Weight & dimensions
Width62 mm
Depth62 mm
Height27 mm
Weight50 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kentix KMS-DOOR-B below.

What is the weight of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a weight of 50 g.

What is the height of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a height of 27 mm.

What is the width of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a width of 62 mm.

What is the depth of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a depth of 62 mm.

Is the manual of the Kentix KMS-DOOR-B available in English?

Yes, the manual of the Kentix KMS-DOOR-B is available in English .

Is your question not listed? Ask your question here

No results