Kentix KMS-DOOR-B manual

Kentix KMS-DOOR-B
7.2 · 1
PDF manual
 · 132 pages
English
manualKentix KMS-DOOR-B

4.6. Visual and acoustic signaling

AlarmManager

LED-POWER: Lights after connection to the power supply
LED-GSM: Flashes: Booked into GSM network, ready for communication.
Constant: No GSM network connection, no communication possible
LED-ARMED: Lights if AlarmManager is armed
LED-ALARM: Lights if an alarm is triggered

MultiSensor-RF / -LAN / -LAN-RF

LED-GREEN: Lights if MultiSensor is powered and function is OK (not in stealth mode)
Lights after power lost for around 3 minutes.
LED-RED: Constant: MultiSensor is armed
Flashes: An alarm was triggered

MultiSensor-RF / -LAN / -LAN-RF and AlarmManager

BUZZER: Alternating: Arm delay is running.#
Delay is depending on configured time in the ControlCenter.
Constant of 1 Second: System has been disarmed.
Constant of 3 Seconds: Arming was not executed - alarms are existing. Please check
external alarm inputs on AlarmManager or MultiSensor.#
#

MultiSensor-Door / -Rack-Mini

Normal operation mode:
LED-RED: blinking 1x per routine message in case of alarm
LED-GREEN: OFF
BUZZER: 1x short in case of alarm (if acoustic signalization is active)
Teach-In process:
LED-RED: OFF
LED-GRÜN: long blinking: Teach-In process started
ON: Teach-In process completed
BUZZER: 1x long when pressing and holding down the teach-in button
for approx. 3 seconds (start of teach-in process)
Page (11-2017, subject to change) kentix.com15

The AlarmManager

Manual

View the manual for the Kentix KMS-DOOR-B here, for free. This manual comes under the category door / window sensors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Kentix KMS-DOOR-B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kentix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kentix KMS-DOOR-B specifications

Below you will find the product specifications and the manual specifications of the Kentix KMS-DOOR-B.

General
BrandKentix
ModelKMS-DOOR-B | KMS-DOOR-B
Productdoor / window sensor
EAN4260300580404
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Connectivity technologyWireless
LED indicatorsYes
Alarm decibels65 dB
Operating frequency2300 MHz
InterfaceZigBee
Power
Battery technologyLithium-Ion (Li-Ion)
Number of batteries supported1
Battery voltage3.6 V
Weight & dimensions
Width62 mm
Depth62 mm
Height27 mm
Weight50 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kentix KMS-DOOR-B below.

What is the weight of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a weight of 50 g.

What is the height of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a height of 27 mm.

What is the width of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a width of 62 mm.

What is the depth of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a depth of 62 mm.

Is the manual of the Kentix KMS-DOOR-B available in English?

Yes, the manual of the Kentix KMS-DOOR-B is available in English .

Is your question not listed? Ask your question here

No results