Kentix KMS-DOOR-B manual

Kentix KMS-DOOR-B
7.2 · 1
PDF manual
 · 132 pages
English
manualKentix KMS-DOOR-B

4.5. Configuration in 8 steps

No
Step

Comment

Startup

1
Connect the AlarmManager via LAN cable to the PC. The yellow LED on the
LAN connector indicates a connection. Start the Kentix ControlCenter and
connect with the default IP-address 192.168.100.222 to the AlarmManager.
With 1:1 LAN connection via network cable
use crossover-adapter. Make sure that
your PC is in the same network.

Menu item „System - Settings“

2
To change the network configuration open the menu item „Network“.
3
To configure the different notification ways, use the menu item „E-Mail, SNMP &
GSM“.
Enter the mobile data according to the used SIM card. When a PIN is used for
the SIM card, first „Save“ your configuration with the correct PIN before inserting
the SIM card into the AlarmManager to avoid a lock of the card.
You can disable the PIN of your SIM card
with a mobile phone. The entries in the
software will then be ignored.

Register tab „User accounts“

4
In the first user account enter your name, e-mail-address and mobile number in
international notation (+49 ...).
Assign an user password and a 4-digit Operator-PIN. The first user account is
always the "Administrator Account" and can not be deleted.#
You can test the e-mail and mobile settings
by pressing one of the test-buttons.
5
Using a KeyPad the PIN also applies to the operation via a KeyPad. Note that
the KeyPad allows only 4-digit passwords. To use the internal RFID card inside a
KeyPad also enter the RFID card number.
When controlling the AlarmManager via
your mobile phone the transmitted phone
number will be checked in addition to the
password.

Register tab „Sensor-Devices“

6
Press the "+" key to teach-in new devices such as MultiSensor or KeyPad.
BASIC: A new window opens and all accessible devices appear as soon as you
press the „learn button“ at the device. After all devices are available in the list
press the "Save" button.#
PRO: A windows opens where you can select RF- or LAN-components.
Selecting RF starts the scanning process as described in the BASIC-Version.
LAN-components have to be configured by entering the correct IP-address in
the „device address“-field.
When you run the teach-in process for RF-
devices a closed wireless network is
created, similar to an encrypted wireless
PC network. Make sure that the devices
are located in radio range close to the
AlarmManager / MultiSensor-LAN-RF.
7
In the list of devices you can already test functionality of the device. With a "right
click" you get a choice of test functions. Let the selected MultiSensor LED flash
and give the device a name.
Via the test functions you can switch also
the external outputs on or off.
8
Finally change the alarm settings and alarm assignments (Armed-Active /
Always-Active) according to your needs.
Armed-Active: Alarms are only triggered,
when the system is in armed state.
Always-Active: Alarms are always
triggered, independent of the armed/
disarmed state of the system

Saving the configuration

IMPORTANT!

Changes made in the ControlCenter only become active when being saved into the AlarmManager.

Page (11-2017, subject to change) kentix.com14

Manual

View the manual for the Kentix KMS-DOOR-B here, for free. This manual comes under the category door / window sensors and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Kentix KMS-DOOR-B or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Kentix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Kentix KMS-DOOR-B specifications

Below you will find the product specifications and the manual specifications of the Kentix KMS-DOOR-B.

General
BrandKentix
ModelKMS-DOOR-B | KMS-DOOR-B
Productdoor / window sensor
EAN4260300580404
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Connectivity technologyWireless
LED indicatorsYes
Alarm decibels65 dB
Operating frequency2300 MHz
InterfaceZigBee
Power
Battery technologyLithium-Ion (Li-Ion)
Number of batteries supported1
Battery voltage3.6 V
Weight & dimensions
Width62 mm
Depth62 mm
Height27 mm
Weight50 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kentix KMS-DOOR-B below.

What is the weight of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a weight of 50 g.

What is the height of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a height of 27 mm.

What is the width of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a width of 62 mm.

What is the depth of the Kentix KMS-DOOR-B?

The Kentix KMS-DOOR-B has a depth of 62 mm.

Is the manual of the Kentix KMS-DOOR-B available in English?

Yes, the manual of the Kentix KMS-DOOR-B is available in English .

Is your question not listed? Ask your question here

No results