Kawasaki Vulcan 500 LTD manual

Kawasaki Vulcan 500 LTD
8.7 · 31
PDF manual
 · 351 pages
English
manualKawasaki Vulcan 500 LTD

12-10 SUSPENSION

Front Fork

When replacing the outer tube guide bushing [A] with a
new one, hold the used guide bushing [B] against the new
one, and tap the used guide bushing with the front fork oil
seal driver [C] until it stops. The slit [D] in the bushing
must face toward the left or right.
Special Tool - Front Fork Oil Seal Driver: 57001-1219
Apply high temperature grease to the oil seal lips.
After installing the washer, install the new oil seal [A] by
using the fork oil seal driver [B].
Install the new retaining r ing i nto the outer tube.
Using the front fork oil seal driver, install the dust seal.
Pour in the type and amount of fork oil specified, and ad-
just the oil level (see Fork Oil Change).
Insert the fork spring, spring seat and spacer.
Check the O-ring at the top plug and replace it with a new
one if it is damaged.
Install the top plug with the O -ring.
Torque - Front Fork Top Plugs: 23 N·m (2.3 kgf·m, 16.5 ft·lb)
Inner Tube Inspection
Visually inspect the inner tube [A], and repair any dam-
age.
Nicks or rust damage can sometimes be repaired by using
a wet-stone to remove sharp edges or raised areas which
cause seal damage .
If the damages is not repairable, replace the inner tube.
Since damage to the inner tube damages the oil seal,
replace the oil seal whenever the inner tube is repaired
or replaced.
CAUTION
If the inner tube is badly bent or creased, replace
it. Excessive bending, followed by subsequent
straightening, can w eaken the inner tube.
Temporarily assemble the inner and outer tubes, and
pump them back and forth manually to check for smooth
operation.
If you feel binding or catching, the inner and outer tubes
must be replaced.

WARNING

A straightened inner or outer fork tube may fall in
use, possibly causing an accident. Replace a badly
bent or damaged inner or outer tube and inspect the
other tube carefully before reusing i t.

View the manual for the Kawasaki Vulcan 500 LTD here, for free. This manual comes under the category motorcycles and has been rated by 31 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Kawasaki Vulcan 500 LTD or do you need help? Ask your question here

Need help?

Do you have a question about the Kawasaki and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 6
V
VagoDecember 11, 2022

What is the screw like that the engine has on top of the engine on one side of the gear on the outside?

What is the screw like that the engine has on top of the engine on one side of the gear on the outside?
zoom-in
View photo
This message has been automatically translated
D
daniel jimenezMarch 27, 2024

Hi in the compartment where the stator goes, is it normal to have oil or does it have a seal to prevent that?

Hi in the compartment where the stator goes, is it normal to have oil or does it have a seal to prevent that?
zoom-in
View photo
This message has been automatically translated
C
CodyMay 30, 2023

What to do when your motorcycle won’t start

S
ShaneJune 3, 2023

Can't find the drain bolt on my 94 vulcan 500

Can't find the drain bolt on my 94 vulcan 500
zoom-in
View photo
R
Robinson Guerra March 4, 2023

Qué medidas tiene el manubrio de la Vulcan 500 modelo 1993

K
KennySeptember 24, 2023

Does a800 Vulcan have a fuesbox

The Kawasaki Vulcan 500 LTD is a motorcycle that was produced by the Japanese manufacturer Kawasaki from 1990 to 2009. It falls under the category of cruiser motorcycles and is designed for riders who prefer a more relaxed and comfortable riding experience. The Kawasaki Vulcan 500 LTD is equipped with a liquid-cooled, 498cc parallel twin engine. This engine configuration provides a balanced power delivery and contributes to the motorcycle's smooth and manageable performance. It features a six-speed transmission, allowing for precise and smooth gear changes. With a relatively lightweight design and a low seat height, the Kawasaki Vulcan 500 LTD offers excellent maneuverability and ease of handling. This makes it an ideal choice for riders who are new to motorcycles or prefer a more manageable ride. In terms of suspension, the Kawasaki Vulcan 500 LTD features a front telescopic fork and rear twin shock absorbers. These suspension components are designed to provide a comfortable and stable ride, absorbing uneven road surfaces and minimizing rider fatigue. The Kawasaki Vulcan 500 LTD is equipped with a disc brake on the front wheel and a drum brake on the rear wheel, ensuring reliable and efficient braking performance. It also features a fuel capacity of approximately 4.0 gallons, allowing for a decent cruising range. Overall, the Kawasaki Vulcan 500 LTD is a reliable and practical cruiser motorcycle, suitable for riders who prioritize comfort, smooth performance, and ease of handling.

General
BrandKawasaki
ModelVulcan 500 LTD
Productmotorcycle
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Kawasaki Vulcan 500 LTD below.

How do I convert miles into kilometres?

1 mile equals 1.609344 kilometers and 1 kilometer equals 0.62137119 miles.

What is the difference between E10 and E5 petrol?

E10 petrol consists of up to ten per cent ethanol while E5 petrol will contain less than five per cent ethanol. As a result, the percentage of E10 petrol is lower than that of E5 petrol, making it less bad for the environment.

How often should I replace the oil filter on my Kawasaki engine?

An oil filter must be replaced every 6000 kilometres (approx. 4000 miles) for most engines.

How often should I change the oil of my Kawasaki engine?

The oil must be changed every 6000 kilometres (approx. 4000 miles) for most engines.

How do I remove rust from my Kawasaki motorcycle?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

How do I check and adjust the tire pressure on my Kawasaki Vulcan 500 LTD?

To check and adjust tire pressure, you need to use a tire pressure gauge and locate the recommended pressure range specified by the manufacturer (usually found on the tire's sidewall). Use a reliable air pump to add or release air until the pressure is within the recommended range.

What should I do if my Kawasaki Vulcan 500 LTD won't start?

Firstly, ensure the motorcycle is in neutral and the engine kill switch is set to "on." Check the battery to ensure it has sufficient charge. If the battery is fine, check for any loose or corroded connections in the ignition circuit. If the issue persists, it would be best to consult a qualified technician.

How do I properly adjust the clutch lever on my Kawasaki Vulcan 500 LTD?

Adjusting the clutch lever requires locating the adjuster nut, often found near the clutch lever perch. Loosening or tightening this nut will change the lever's position. Find the position that provides a comfortable reach while still engaging the clutch effectively.

How do I change the engine oil on my Kawasaki Vulcan 500 LTD?

Start by warming up the motorcycle's engine. Next, locate the oil drain plug underneath the engine and use a suitable wrench to remove it. Allow the old oil to drain completely. Then, remove the oil filter and replace it with a new one. Finally, reinstall the drain plug and fill the engine with the recommended amount and type of fresh oil.

How do I adjust the rear suspension on my Kawasaki Vulcan 500 LTD?

To adjust the rear suspension, locate the preload adjuster on the rear shock absorbers. Turning the adjuster clockwise increases the preload, providing stiffer suspension, while turning it counterclockwise decreases the preload, resulting in a softer ride. Find the appropriate setting that suits your riding preferences and weight.

Is the manual of the Kawasaki Vulcan 500 LTD available in English?

Yes, the manual of the Kawasaki Vulcan 500 LTD is available in English .

Is your question not listed? Ask your question here

No results