JVC LT-37X898 manual

JVC LT-37X898
7.3 · 1
PDF manual
 · 88 pages
English
manualJVC LT-37X898
76

Troubleshooting

Refer to the table below to check the condition. If you think that there is a problem, contact the

JVC Service Center where you purchased the television.

There is no power
There is no picture
or sound
You cannot select a
certain channel
The power turns off
by itself
The clock is wrong
The color quality
is poor
There are lines
across the picture
The picture is spotted
There are double
pictures (ghosts)
Picture is snowy
(image noise)
Remote control is not
operating properly or
at all
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
• The antenna could be disconnected.
• The input mode could be set improperly. See page 59.
• The tuner (Auto Tuner Setup) could be set improperly. See page 37.
• The TV station may be having difficulties. Check to see if other stations are working.
• Use the HDMI cable with HDMI logo . See page 19.
• If you have a device connected to INPUT-1, INPUT-2 or INPUT-5 (set "V5 INPUT" in the
INITIAL SETUP menu to "HDMI"). You will not be able to hear any audio from the
AUDIO OUT on the back of the TV.
• You cannot output audio using the OPTICAL OUTPUT when you have digital sound from
an HDMI device connected to the INPUT-1, INPUT-2 or INPUT-5 (set "V5 INPUT" in the
INITIAL SETUP menu to "HDMI") connection on the back of the TV.
(See page 18).
• This TV can accept 480i (Composite / S / HDMI / Component), 480p, 720p and 1080i
signals. Please check your settings.
• Check to see that the batteries are still working and properly installed.
• Make sure the remote has a clear sight path to the TV.
• You may be too far from the TV. You must be within 23 feet (7 meters).
• Make sure the channels have been programmed. See "Channel Summary", page 38.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 39.
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 57.
• Check to see if the Sleep Timer was set. See page 66.
• The power was interrupted and the clock was not reset. See page 56.
• Tint and Color may be improperly adjusted. See page 50.
• The Video Status mode may be turned to the wrong setting. See page 65.
• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
PROBLEMS CHECK
It does not operate
correctly
• This television is operated by a microprocessor. It is possible that external noise or
interference is causing the problem. If the television does not function correctly, remove the
electrical plug from the wall outlet and wait a while before inserting it into the wall outlet
again and operating the television.

Manual

View the manual for the JVC LT-37X898 here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the JVC LT-37X898 or do you need help? Ask your question here

Need help?

Do you have a question about the JVC and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

JVC LT-37X898 specifications

Below you will find the product specifications and the manual specifications of the JVC LT-37X898.

General
BrandJVC
ModelLT-37X898
Producttelevision
EAN0046838031786
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the JVC LT-37X898 below.

What's the best viewing distance for my JVC television?

The ideal viewing distance for your JVC television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Is the manual of the JVC LT-37X898 available in English?

Yes, the manual of the JVC LT-37X898 is available in English .

Is your question not listed? Ask your question here

No results