Juwel Bioflow XL/8.0 manual

Juwel Bioflow XL/8.0
5.8 · 1
PDF manual
 · 6 pages
English
manualJuwel Bioflow XL/8.0

The JUWEL filter system Bioflow

The JUWEL filter system Bioflow is a highly effective biological filter system with two
stages that includes components complementing each other in an ideal manner.
Installing the filter in the aquarium makes hose connections unnecessary and prevents
leaks. The pump output is not negatively affected by hose couplings, intake tubes etc.
The capacity of the pump is designed in such a manner that an ideal level of biological
filtering is ensured by a sufficient level of percolation through the filter material.
In that context, the large filter volume ensures excellent mechanical filtering and
facilitates long cleaning intervals.
The construction of the filter system enables you to quickly access the individual
heater, pump, and filter media components. This way, the filter system may
comfortably be operated during cleaning and while performing maintenance work.

Bioflow 3.0

Bioflow 6.0

Bioflow 8.0

Bioflow Super

bioPad - Filter Wool (white pad)
The white filter wool acts as a mechanical pre-filter, removing large particles of dirt
and excess food which in turn ensures that the other sponges do not get clogged.
bioCarb - Active Carbon Sponge (black)
The black activated carbon sponge sits on top of the blue coarse filter sponges, and
removes chemical impurities from the water which cannot be removed biologically.
Nitrax - Nitrate Removal Sponge (green)
The Sponge contains micro-organisms, which will, once developed, reside inside the
sponges and in the water. These micro-organisms feed of nitrates and will reduce them
significantly. The JUWEL Filtration system provides the optimum housing for these
micro-organisms.
bioPlus coarse - Filter Sponge Coarse (blue)
The coarse blue filter sponges allow bacteria cultures to develop quickly, cleaning the
water which is now free from chemical impurities.
bioPlus fine - Filter Sponge Fine (blue)
The fine blue sponges and the bacteria cultures living in them, clean the water of even
the smallest impurities.

Bioflow 3.0

Bioflow 6.0

Bioflow 8.0

Installation of the JUWEL Filter System in your Aquarium

The JUWEL Filter has been designed for installation in the right hand corner of the
aquarium.
First of all, please remove all internal components of the Filter System leaving you
with the empty filter housing.
In order to ensure that the Filter System is securely fastened to the glass panels, we
have included a tube of special JUWEL Aquarium silicon. Apply the silicone onto the
housing as shown in the picture, on both the side and the rear walls.
Your Aquarium should be empty or as near as empty, allowing you to wipe the glass
dry.
Position the filter housing in the aquarium in such a way that the top of the filter
housing rises 1 cm above the maximum water level of your aquarium.
Press the housing onto the glass panels firmly, and hold it for a few minutes. Allow
the silicone to dry out for at least 24 hours.
SILIKON
3

Manual

View the manual for the Juwel Bioflow XL/8.0 here, for free. This manual comes under the category water filters and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the Juwel Bioflow XL/8.0 or do you need help? Ask your question here

Need help?

Do you have a question about the Juwel and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Juwel Bioflow XL/8.0 specifications

Below you will find the product specifications and the manual specifications of the Juwel Bioflow XL/8.0.

General
BrandJuwel
ModelBioflow XL/8.0
Productwater filter
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Juwel Bioflow XL/8.0 below.

Why is the water flow in my Juwel Bioflow XL/8.0 too weak?

Ensure that the pump is properly connected to the power source and the impeller is not blocked. It is also important to check if the filter media is clogged and needs cleaning.

How often should I clean the filter media in my Juwel Bioflow XL/8.0?

As a general guideline, it is recommended to clean the filter media every 2-4 weeks. However, the frequency may vary depending on the bio-load of your aquarium and the water quality.

What should I do if the water in my Juwel Bioflow XL/8.0 becomes cloudy?

Cloudy water can be a sign of poor filtration or an imbalance in the aquarium. Check that the filter media is clean and properly installed. Additionally, test the water parameters such as ammonia, nitrite, and nitrate levels to identify any potential issues.

How can I reduce the noise coming from my Juwel Bioflow XL/8.0?

First, ensure that the pump is properly positioned and the unit is securely attached to the aquarium. Noise can also be caused by air bubbles, so make sure the air intake is adjusted correctly. If the noise persists, consider using vibration-dampening materials or placing the filter on a soft surface.

What is the appropriate water level for my Juwel Bioflow XL/8.0?

The water level should ideally be maintained just below the outflow of the filter in order to ensure proper water circulation. It is important to monitor the water level regularly, as evaporation and water changes can affect it. Adjust accordingly to maintain optimal performance.

Is the manual of the Juwel Bioflow XL/8.0 available in English?

Yes, the manual of the Juwel Bioflow XL/8.0 is available in English .

Is your question not listed? Ask your question here

No results