Juno JGVX60528 manual

Juno JGVX60528
8.9 · 1
PDF manual
 · 48 pages
English
manualJuno JGVX60528
Störung und Alarmcode Mögliche Ursache und Abhilfe
Das Wasserauslauf-Schutz‐
system ist eingeschaltet.
Im Display erscheint .
Drehen Sie den Wasserhahn zu und wenden Sie sich an
einen autorisierten Kundendienst.
Während des Betriebs
stoppt und startet das Gerät
mehrmals.
Das ist normal. So werden optimale Reinigungsergebnisse
erzielt und Strom gespart.
Das Programm dauert zu
lang.
Wenn die Zeitvorwahl eingestellt ist, brechen Sie diese ab
oder warten Sie, bis sie abgelaufen ist.
Die verbleibende Zeit im
Display erhöht sich und
springt bis kurz vor die Pro‐
grammende-Zeit.
Dies ist keine Störung. Das Gerät arbeitet ordnungsge‐
mäß.
Aus der Gerätetür tritt ein
wenig Wasser aus.
Das Gerät ist nicht ausgerichtet. Schrauben Sie die
Schraubfüße weiter hinein oder weiter heraus (falls vor‐
handen).
Die Gerätetür ist nicht mittig zur Wanne positioniert. Stel‐
len Sie den hinteren Fuß ein (sofern vorhanden).
Die Gerätetür ist schwer zu
schließen.
Das Gerät ist nicht ausgerichtet. Schrauben Sie die
Schraubfüße weiter hinein oder weiter heraus (falls vor‐
handen).
Teile des Geschirrs ragen aus den Körben heraus.
Klappernde/schlagende Ge‐
räusche aus dem Gerätein‐
neren.
Das Geschirr ist nicht richtig in den Körben eingeordnet.
Siehe Broschüre zum Beladen der Körbe.
Achten Sie darauf, dass sich die Sprüharme frei drehen
können.
Das Gerät löst die Siche‐
rung aus.
Die abgesicherte Stromstärke reicht nicht für den gleich‐
zeitigen Betrieb aller eingeschalteten Geräte. Überprüfen
Sie, für welche Stromstärke die Steckdose bzw. der
Stromzähler zugelassen ist, und schalten Sie eines der
eingeschalteten Geräte aus.
Ein Fehler in der Elektrik des Geräts. Wenden Sie sich an
den autorisierten Kundendienst.

Siehe „Vor der ersten

Inbetriebnahme“, „Täglicher

Gebrauch“ oder „Tipps und

Hinweise“ bezüglich anderer

möglicher Ursachen.

Schalten Sie nach der Überprüfung das

Gerät aus und wieder ein. Tritt das

Problem erneut auf, wenden Sie sich an

einen autorisierten Kundendienst.

Wenden Sie sich an einen autorisierten

Kundendienst, wenn Alarmcodes

angezeigt werden, die nicht in der Tabelle

angegeben sind.

41

Manual

View the manual for the Juno JGVX60528 here, for free. This manual comes under the category dishwashers and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Juno JGVX60528 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Juno and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
I
Iratxe Garmendia Ezkerra December 4, 2022

When turning on the dishwasher it only allows you to select the eco program. How can I select another program? It doesn't allow me to.

When turning on the dishwasher it only allows you to select the eco program. How can I select another program? It doesn't all...
zoom-in
View photo
This message has been automatically translated

Juno JGVX60528 specifications

Below you will find the product specifications and the manual specifications of the Juno JGVX60528.

The Juno JGVX60528 dishwasher is a kitchen appliance that efficiently cleans and sanitizes dishes. Designed to be user-friendly, it offers a range of features for easy operation and convenience. The dishwasher has multiple wash cycles, allowing users to choose the most suitable setting for their needs. It also includes adjustable racks, providing flexibility in organizing and accommodating different types of dishware. The Juno JGVX60528 dishwasher is equipped with a powerful motor and effective jets, ensuring thorough cleaning of even the toughest stains and food residues. With its advanced filtration system, it effectively removes debris and prevents clogging. The dishwasher is also energy-efficient, reducing water and electricity consumption during each cycle. The Juno JGVX60528 dishwasher is made from high-quality materials, guaranteeing long-lasting performance and durability. It is designed with noise reduction technology, minimizing disruption in the kitchen environment. The dishwasher's sleek and modern design adds a stylish touch to any kitchen decor. With its compact size, the Juno JGVX60528 dishwasher is suitable for smaller kitchens or households with space constraints. It is easy to install and requires minimal maintenance. The dishwasher also includes safety features, such as child locks, ensuring peace of mind for families with young children. Overall, the Juno JGVX60528 dishwasher offers efficient and reliable dishwashing capabilities, making it a practical addition to any kitchen. Its user-friendly features, durable construction, and energy-saving functionality make it a practical choice for everyday use.

General
BrandJuno
ModelJGVX60528
Productdishwasher
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Juno JGVX60528 below.

What do I do about a smelly dishwasher?

In the case of a smelly dishwasher, you can take the following steps: - Clean the filters - Clean the spray arms - Clean the door rubbers - Run a hot wash program - Run an empty machine with a dishwasher cleaner

Do you have to pre-rinse the dishes?

It is not recommended to rinse dirty dishes before placing them in the dishwasher. For the life cycle of the machine, it is better to put everything dirty in the dishwasher. The grease on the dirty dishes is the lubrication for the pump in the machine.

How much dishwashing detergent should I use?

The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.

How do I add softening salt to my dishwasher?

Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.

How do I clean the filters in the Juno JGVX60528 dishwasher?

To clean the filters in the Juno JGVX60528 dishwasher, follow these steps: 1. Remove the filter (C) from the filter (B). 2. Take out the flat filter (A). 3. Wash all the filters thoroughly. 4. Ensure there are no food residues or soil around the edge of the sump. 5. Place the flat filter (A) back in its position, making sure it is correctly positioned under the two guides. 6. Reassemble the filters (B) and (C). 7. Put the filter (B) back into the flat filter (A) and turn it clockwise until it locks. Note: Incorrect positioning of the filters can result in poor washing results and damage to the dishwasher. Additionally, it is recommended to clean the upper spray arm regularly to prevent clogging of the holes, which can affect washing performance. To clean the upper spray arm: 1. Pull out the upper basket. 2. Press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn it clockwise to disengage it from the basket. 3. Wash the spray arm under running water and use a thin pointed tool, such as a toothpick, to remove any particles of soil from the holes. Regularly cleaning the filters and the upper spray arm will help maintain optimal performance of the Juno JGVX60528 dishwasher.

Why is the control panel of the Juno JGVX60528 dishwasher not responding?

If the control panel of the Juno JGVX60528 dishwasher is not responding, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the dishwasher is properly connected to a power source and that the power supply is stable. Check if there are any loose connections or tripped circuit breakers. 2. Reset the dishwasher: Turn off the dishwasher by pressing the on/off button and unplugging it from the power source. Wait for a few minutes, then plug it back in and turn it on again. 3. Check the display: If the display is blank or showing error codes, refer to the user manual for specific troubleshooting steps related to the display. 4. Check the control buttons: Make sure that the control buttons are not stuck or damaged. Clean the buttons gently with a soft cloth to remove any dirt or debris that may be affecting their functionality. 5. Contact customer support: If the control panel still does not respond after trying the above steps, it is recommended to contact the Juno customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a technician to inspect the dishwasher. Remember to refer to the user manual for any additional information or specific instructions related to the control panel of the Juno JGVX60528 dishwasher.

How do I select the appropriate program for different types of dishes in the Juno JGVX60528 dishwasher?

To select the appropriate program for different types of dishes in the Juno JGVX60528 dishwasher, follow these steps: 1. Start by assessing the level of dirtiness and the type of load you have. Determine if it is heavily soiled dishes, pots, and pans, or if it is delicate dishes and glasses. 2. Refer to the program options available in the user mode of the dishwasher. These options may include different levels of water softener, activation or deactivation of the acoustic signal for the end of a program, activation or deactivation of the rinse aid empty notification, and the level of rinse aid according to the required dosage. 3. Based on the assessment of the load and the available program options, select the appropriate program number on the control panel. The program numbers may vary depending on the dishwasher model, but typically there are multiple programs to choose from. 4. For heavily soiled dishes, pots, and pans, select a program that offers a higher temperature and longer duration for thorough cleaning. This program may also include additional options such as HygienePlus for enhanced hygiene and XtraDry for improved drying performance. 5. For delicate dishes and glasses, select a program that offers a lower temperature and shorter duration to prevent damage. You may also consider using the XtraDry option to ensure effective drying. Remember to refer to the user manual for any specific instructions or recommendations regarding the selection of programs for different types of dishes in the Juno JGVX60528 dishwasher.

How do I load the dishes properly in the Juno JGVX60528 dishwasher?

To load the dishes properly in the Juno JGVX60528 dishwasher, follow these steps: 1. Remove any leftover food or debris from the dishes before loading them into the dishwasher. Scrape off excess food and rinse off any stubborn stains. 2. Start with the lower basket. Place larger and heavier items such as pots, pans, and plates in the lower basket. Make sure they are positioned in a way that allows water to reach all surfaces. 3. Arrange the cutlery in the cutlery basket. Place knives, forks, and spoons with their handles facing downwards to ensure proper cleaning. Separate the cutlery to prevent them from sticking together. 4. Move on to the upper basket. This is where you should place smaller and more delicate items such as glasses, cups, and bowls. Ensure that they are securely positioned and do not touch each other to avoid breakage. 5. Check the spray arms and make sure they can rotate freely without any obstructions. Avoid overloading the dishwasher to allow proper water circulation and cleaning. 6. Close the dishwasher door securely and double-check that no items are blocking the detergent dispenser or preventing the spray arms from rotating. Remember to refer to the user manual for any specific instructions or recommendations regarding the loading of dishes in the Juno JGVX60528 dishwasher.

Why is the HygienePlus function not working in the Juno JGVX60528 dishwasher?

The HygienePlus function may not be working in the Juno JGVX60528 dishwasher due to the following reasons: 1. Incompatibility with the selected program: The HygienePlus function may not be applicable to certain programs. Check if the related indicator does not come on or flashes quickly for a few seconds and then goes out. In such cases, the function cannot be activated. 2. Incorrect activation: Ensure that you have correctly activated the HygienePlus function. Press the corresponding button (usually labeled as "HygienePlus") on the control panel. The related indicator should come on. 3. Water temperature and duration: The HygienePlus function keeps the temperature at 70 °C for at least 10 minutes during the last rinsing phase. If the water temperature is not reaching the required level or the duration is insufficient, the function may not work effectively. Check if the water supply is adequate and the dishwasher is operating properly. If the HygienePlus function continues to not work despite following these steps, it is recommended to contact Juno customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a technician to inspect the dishwasher.

How do I clean the spray arms of the Juno JGVX60528 dishwasher?

To clean the spray arms of the Juno JGVX60528 dishwasher, follow these steps: 1. Pull out the upper basket of the dishwasher. 2. To disengage the spray arm from the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn it counterclockwise. 3. Wash the spray arm under running water. 4. Use a thin pointed tool, such as a toothpick, to remove any particles of soil from the holes of the spray arm. 5. Once the spray arm is clean, reattach it to the basket by pressing it upwards and turning it clockwise until it locks into place. It is important to regularly clean the spray arms to ensure optimal performance and avoid clogging of the holes, which can result in unsatisfactory washing results. By following these steps, you can maintain the cleanliness and efficiency of the spray arms in your Juno JGVX60528 dishwasher.

Why is the display on the control panel of the Juno JGVX60528 dishwasher not working?

There could be several reasons why the display on the control panel of the Juno JGVX60528 dishwasher is not working. Here are some possible causes and solutions: 1. Power supply issue: Make sure the dishwasher is properly connected to a power source and that the power outlet is functioning correctly. Check if the circuit breaker or fuse for the dishwasher is tripped or blown. 2. Control panel lock: Check if the control panel is locked. Some dishwashers have a control lock feature to prevent accidental changes. Look for a lock symbol on the control panel and follow the instructions in the manual to unlock it. 3. Faulty display module: If none of the buttons on the control panel are responding and there are no error codes displayed, there might be a problem with the display module. In this case, it is recommended to contact an authorized service technician for further assistance. 4. Wiring or connection issue: Inspect the wiring and connections between the control panel and the main control board. If there are any loose or damaged wires, they may need to be repaired or replaced. If the issue persists after checking these possible causes, it is advisable to seek professional help from an authorized service technician to diagnose and resolve the problem with the display on your Juno JGVX60528 dishwasher.

How do I select the appropriate program on the Juno JGVX60528 dishwasher?

To select the appropriate program on the Juno JGVX60528 dishwasher, follow these steps: 1. Make sure the dishwasher is in program selection mode. The display should show the program number "P1". If not, set the program selection mode by pressing and holding the "Reset" button until the appliance enters program selection mode. 2. Look for the available program options on the control panel. The programs may be labeled with numbers or names indicating different levels of dirtiness or specific types of dishes. 3. Determine the level of dirtiness and the type of dishes you want to wash. For example, if the dishes are heavily soiled, select a program like "P3" for strong dirtiness. If the dishes are lightly soiled or delicate, choose a program like "P4" or "P5". 4. Press the corresponding button or select the program number on the control panel to choose the desired program. The display should show the selected program. 5. If needed, you can also adjust additional options such as HygienePlus or XtraDry, depending on your preferences and the specific requirements of the load. By following these steps, you can easily select the appropriate program on your Juno JGVX60528 dishwasher for efficient and effective cleaning.

How do I activate the HygienePlus or XtraDry function on the Juno JGVX60528 dishwasher?

To activate the HygienePlus or XtraDry function on the Juno JGVX60528 dishwasher, follow these steps: 1. Make sure the dishwasher is in program selection mode. The display should show the program number "P1". If not, set the program selection mode by pressing and holding the "Reset" button until the appliance enters program selection mode. 2. Look for the HygienePlus and XtraDry buttons on the control panel. These buttons are labeled accordingly and have their respective indicator lights. 3. To activate the HygienePlus function, press the "HygienePlus" button. The corresponding indicator light will turn on. Note that the HygienePlus function may not be compatible with all programs. If the indicator light does not turn on or blinks briefly and then goes off, it means that the function cannot be combined with the selected program. 4. To activate the XtraDry function, press the "XtraDry" button. The related indicator light will illuminate. The XtraDry function is a permanent option for all programs except for . Once activated, it remains on for subsequent cycles unless manually turned off. By following these steps, you can easily activate the HygienePlus or XtraDry function on your Juno JGVX60528 dishwasher, enhancing the hygiene and drying performance of your wash cycles.

Is the manual of the Juno JGVX60528 available in English?

Yes, the manual of the Juno JGVX60528 is available in English .

Is your question not listed? Ask your question here

No results