Junker JS03IN53 manual

Junker JS03IN53
7.3 · 2
PDF manual
 · 40 pages
English
manualJunker JS03IN53
Installation and connection en
37

Electrical connection

Connect the appliance to an
alternating current only, ranging from
220 V to 240 V and 50 Hz or 60 Hz
via a correctly installed socket with
protective earth conductor. See
rating plate for required fusing 92.
The socket must be near
the appliance and freely accessible
following installation.
If the plug is not freely accessible, an
allpole disconnector with a contact
opening of at least 3 mm must be
fitted on the installation side
to satisfy the relevant safety
instructions.
The connection may be modified by
technicians only.
A power cord extension may be
purchased from customer service
only.
Use only a residual current operated
circuit-breaker which features
the symbol . Only this extension
guarantees compliance with
the currently valid regulations.
The appliance features a water
damage protection system. Please
note the system will not function
unless the power supply
is connected.

Removing the appliance

Also observe
the sequence of worksteps here.
1. Disconnect the appliance from
the power supply.
2. Turn off the water supply.
3. Undo the waste water and drinking
water connection.
4. Loosen fastening screws for
the furniture parts.
5. If fitted, remove the base panel.
6. Pull out the appliance, carefully
pulling the hose behind.

Manual

View the manual for the Junker JS03IN53 here, for free. This manual comes under the category dishwashers and has been rated by 2 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Junker JS03IN53 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Junker and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
B
Bob Roe August 1, 2022

How can I remove a decorative panel from the front of my Junker dishwasher to change the cabinet handle? I don't know the model number because I just moved into the house and I didn't buy the machine. I've attached a picture. Thank you.

How can I remove a decorative panel from the front of my Junker dishwasher to change the cabinet handle? I don't know the mod...
zoom-in
View photo
This message has been automatically translated

Junker JS03IN53 specifications

Below you will find the product specifications and the manual specifications of the Junker JS03IN53.

The Junker JS03IN53 is a dishwasher model designed for residential use. It is specifically engineered to effectively clean and sterilize dishes, utensils, and other kitchenware. With its sleek design, the JS03IN53 seamlessly integrates into any kitchen decor, offering a modern and stylish look. The dishwasher incorporates advanced technology and features, ensuring optimal performance and efficiency. Equipped with multiple wash cycles, the JS03IN53 allows users to choose the most suitable program for their cleaning needs. These cycles include options such as heavy-duty, normal, quick, and eco-friendly modes, providing flexibility and convenience. The dishwasher offers a spacious interior, capable of accommodating a significant amount of dirty dishes. It features adjustable racks, allowing users to customize the layout according to their preferences and needs. Additionally, the JS03IN53 incorporates a unique cutlery tray, ensuring thorough cleaning of utensils and preventing them from tangling or scratching during the wash cycle. Regarding noise levels, the JS03IN53 is designed to operate quietly, minimizing disturbances in the home environment. This is particularly beneficial for those with open-plan living spaces or sensitive sleepers. In terms of energy efficiency, the JS03IN53 meets industry standards, consuming minimal electricity and water during operation. This reduces environmental impact and lowers utility costs for the user. The JS03IN53 dishwasher incorporates robust materials and a sturdy construction, guaranteeing durability and long-lasting performance. It is designed to withstand daily use and maintain its efficiency over time. Overall, the Junker JS03IN53 is a reliable and efficient dishwasher model that offers various features and a sleek design, making it a practical addition to any modern kitchen.

General
BrandJunker
ModelJS03IN53
Productdishwasher
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Junker JS03IN53 below.

What do I do about a smelly dishwasher?

In the case of a smelly dishwasher, you can take the following steps: - Clean the filters - Clean the spray arms - Clean the door rubbers - Run a hot wash program - Run an empty machine with a dishwasher cleaner

Do you have to pre-rinse the dishes?

It is not recommended to rinse dirty dishes before placing them in the dishwasher. For the life cycle of the machine, it is better to put everything dirty in the dishwasher. The grease on the dirty dishes is the lubrication for the pump in the machine.

How much dishwashing detergent should I use?

The average amount used is about 25 grams of dishwashing detergent. It is recommended to follow the advice on the packaging.

How do I add softening salt to my dishwasher?

Each dishwasher has a separate compartment for softening salt. It opens when you turn the knob on the compartment. The softening salt can then be poured into the compartment by means of a funnel.

Why is the dishwasher not powering on?

Ensure that the power cord is securely plugged into a functioning power outlet. Check if there is any visible damage to the cord that may be causing a connection issue.

Why is the dishwasher not cleaning dishes properly?

Make sure that the dishwasher is loaded correctly, ensuring that dishes are not blocking the spray arms. Check the water temperature setting and increase it if necessary, as hotter water aids in better cleaning. Also, ensure that the water supply valve is fully open.

Why is water leaking from the dishwasher?

Examine the door gasket for any visible damage or debris that may be hindering a proper seal. Confirm that the dishwasher is level and not tilted, allowing water to seep out. Check if the water inlet valve or the hose connections are loose or faulty.

Why is the dishwasher making loud noises during operation?

Inspect the dishwasher for any loose items, such as silverware or dishes, that may be causing the noise. Ensure that the spray arms are not obstructed by large food particles. Additionally, make sure that the dishwasher is leveled properly and that the noise is not due to an unbalanced load.

Why is the dishwasher not draining water?

Check the filter and drain pump for any blockages or debris that may be impeding the draining process. Ensure that the drain hose is properly connected and not kinked. It is also advisable to check if the sink drain is not clogged, as it can affect dishwasher drainage.

Is the manual of the Junker JS03IN53 available in English?

Yes, the manual of the Junker JS03IN53 is available in English .

Is your question not listed? Ask your question here

No results