Junker JD66SE50 manual

Junker JD66SE50
7.9 · 1
PDF manual
 · 40 pages
English
manualJunker JD66SE50
8

Installation

Rohrmaße

Hinweis: Für Beanstandungen, die auf die Rohrstrecke zurück-
zuführen sind, übernimmt der Hersteller des Gerätes keine
Gewährleistung.
Das Gerät erreicht seine optimale Leistung durch ein kurzes,
geradliniges Abluftrohr und einen möglichst großen Rohr-
durchmesser.
Durch lange raue Abluftrohre, viele Rohrbögen oder Rohr-
durchmesser, die kleiner als 150 mm sind, wird die optimale
Absaugleistung nicht erreicht und das Lüftergeräusch wird
lauter.
Die Rohre oder Schläuche zum Verlegen der Abluftleitung
ssen aus nicht brennbarem Material sein.
Rundrohre
Es wird ein Innendurchmesser von 150 mm empfohlen, jedoch
mindestens 120 mm.
Flachkanäle
Der Innenquerschnitt muss dem Durchmesser der Rundrohre
entsprechen.
Ø 150 mm ca. 177 cm
2
Ø 120 mm ca. 113 cm
2
Flachkanäle sollten keine scharfen Umlenkungen haben.
Bei abweichenden Rohrdurchmessern Dichtstreifen einset-
zen.

Wand überprüfen

Die Wand muss eben, senkrecht und ausreichend tragfähig
sein.
Die Tiefe der Bohrlöcher muss der Länge der Schrauben ent-
sprechen. Die Dübel müssen einen festen Halt haben.
Die beiliegenden Schrauben und Dübel sind für massives
Mauerwerk geeignet. Für andere Konstruktionen (z.B. Rigips,
Porenbeton, Poroton-Mauerziegel) müssen entsprechende
Befestigungsmittel verwendet werden.
Das max. Gewicht der Dunstabzugshaube beträgt 40 kg.

Installation vorbereiten

1.Von der Decke bis zur Unterkante der Dunstabzugshaube
eine senkrechte Mittellinie an die Wand zeichnen.
2.Positionen für die Schrauben und die Kontur des Einhänge-
bereiches anzeichnen.
3.Fünf Löcher mit Ø 8 mm und Bohrtiefe 80 mm für die Befesti-
gungen bohren und die Dübel wandbündig eindrücken.

Installation

1.Haltewinkel für die Kaminverblendung anschrauben. ¨
[
PP
PP
PP
PLQPP
PD[PP
PP
PP
[
$

Manual

View the manual for the Junker JD66SE50 here, for free. This manual comes under the category exhaust hoods and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Junker JD66SE50 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Junker and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Junker JD66SE50 specifications

Below you will find the product specifications and the manual specifications of the Junker JD66SE50.

General
BrandJunker
ModelJD66SE50
Productexhaust hood
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Junker JD66SE50 below.

When should I replace the carbon filter on my extractor hood?

The carbon filter should be replaced every three to twelve months.

How often should I clean the metal hood grease filters?

The metal grease filters should be cleaned every eight to ten weeks.

Where can I find the model number of my cooker ectractor hood?

The model number of the hood is usually found on a white label inside the hood.

Is the manual of the Junker JD66SE50 available in English?

Yes, the manual of the Junker JD66SE50 is available in English .

Is your question not listed? Ask your question here

No results