Junker JD66SE50 manual

Junker JD66SE50
7.9 · 1
PDF manual
 · 40 pages
English
manualJunker JD66SE50
14

Operation

These instructions apply to several appliance variants. It is
possible that individual features are described which do not
apply to your appliance.
Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Control panel

Switching on fan

Press On/Off button.
Increase fan setting by pressing button
@ or reduce
it by pressing button
A.
Intensive setting
You can use the Intensive setting to extract particularly strong
odours or heavy vapours.
Press the
@ button repeatedly until ˜ or appears in the
display.
The run time is limited. The appliance then switches back
automatically a lower fan setting. You can switch back manually
at any time.
Fan run-on
Keep pressing button
A until is indicated on the display. The
run time is limited. The appliance runs for 10 minutes at fan
setting 1 and then switches off by itself.

Lighting

The lighting can be switched on and off independently of the
fan.

Installing and removing the filter

: Risk of burns, risk of electric shock!

from appliance. Always leave appliance to cool down before
cleaning or servicing. Switch off fuse or pull out mains plug.

Removing metal mesh grease filter

1.Open the lock and fold down the metal mesh grease filter.
While doing this, place the other hand under the metal mesh
grease filter.
2.Take the metal mesh grease filter out of the holder.
With edge extraction
1.Pull metal mesh grease filter downwards.
While doing this, place the other hand under the metal mesh
grease filter.
2.Take the metal mesh grease filter out of the holder.
Notes
Grease can accumulate in the bottom of the metal mesh
grease filter.
Do not hold the metal mesh grease filter at an angle,
otherwise grease will drip out.

Installing the metal mesh grease filter

1.Insert the metal mesh grease filter.
While doing this, place the other hand under the metal mesh
grease filter.
2.Fold up the metal mesh grease filter, locking it in place.
/LJKW
2Q2II2Q2II
'LVSOD\
)DQVHWWLQJV
6ZLWFKIDQ
VHWWLQJGRZQ
6ZLWFKIDQVHWWLQJXS
,QWHQVLYHVHWWLQJ

Manual

View the manual for the Junker JD66SE50 here, for free. This manual comes under the category exhaust hoods and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Junker JD66SE50 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Junker and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Junker JD66SE50 specifications

Below you will find the product specifications and the manual specifications of the Junker JD66SE50.

General
BrandJunker
ModelJD66SE50
Productexhaust hood
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Junker JD66SE50 below.

When should I replace the carbon filter on my extractor hood?

The carbon filter should be replaced every three to twelve months.

How often should I clean the metal hood grease filters?

The metal grease filters should be cleaned every eight to ten weeks.

Where can I find the model number of my cooker ectractor hood?

The model number of the hood is usually found on a white label inside the hood.

Is the manual of the Junker JD66SE50 available in English?

Yes, the manual of the Junker JD66SE50 is available in English .

Is your question not listed? Ask your question here

No results