View the manual for the John Lewis JLFFW 2012 here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the John Lewis JLFFW 2012 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the John Lewis JLFFW 2012.
| Brand | John Lewis |
| Model | JLFFW 2012 |
| Product | refrigerator |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the John Lewis JLFFW 2012 below.
There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?
A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.
A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.
R-410A is a refrigerant used in machines that cool to zero degrees Celsius.
To properly install the John Lewis JLFFW 2012 refrigerator, follow these steps: 1. Ensure that there is easy access to the mains power supply, as the appliance must be easily disconnected if needed. 2. If any electrical work is required for installation, it should be carried out by a qualified electrician or competent person. 3. Make sure the appliance is properly earthed for safety. 4. Check the colours of the wires in the mains lead and connect them accordingly: - Connect the wire coloured green and yellow to the terminal marked with the letter "E" or the earth symbol. - Connect the wire coloured blue to the terminal marked with the letter "N" or coloured black. - Connect the wire coloured brown to the terminal marked with the letter "L" or coloured red. - Ensure that there are no cut or stray strands of wire and that the cord clamp is secure over the outer sheath. 5. Verify that the electricity supply voltage matches the rating indicated on the appliance. 6. Switch on the appliance. 7. If necessary, change the fuse in the plug to a 13 amp ASTA approved fuse. 8. If a permanent connection is required, install a double pole switch between the appliance and the electricity supply, following electrical regulations. 9. Use the rear spacers provided in the documentation bag to ensure proper installation. 10. Level the appliance by adjusting the two adjustable feet at the bottom front. 11. If needed, remove the shelf holders by moving them in the direction indicated, lifting the shelf from the rear, and removing the retainers. Please note that these steps are a general guide for installing the John Lewis JLFFW 2012 refrigerator. For detailed instructions and specific information, refer to the manual.
The recommended dimensions and technical specifications for the John Lewis JLFFW 2012 refrigerator are as follows: - Dimensions: - Height: 1850 mm - Width: 595 mm - Depth: 632 mm - Technical Specifications: - Rising Time: 16 hours Please note that these dimensions and specifications are specific to the John Lewis JLFFW 2012 refrigerator model. It is important to refer to the rating plate on the internal left side of the appliance and the energy label for accurate and detailed information. When installing the refrigerator, it is essential to read the "Safety Information" section carefully to ensure proper installation and operation. Position the appliance in a location where the ambient temperature corresponds to the climate class indicated on the rating plate. The appliance should be installed away from heat sources such as radiators and direct sunlight, allowing for proper air circulation around the back of the cabinet. Levelling the appliance can be achieved using the adjustable feet at the base of the cabinet. For more detailed instructions and information, please refer to the manual provided with the appliance.
To position the John Lewis JLFFW 2012 refrigerator in your kitchen, follow these steps: 1. Choose a suitable location: Select a spot in your kitchen that is away from direct sunlight, heat sources such as radiators, and areas with high humidity. 2. Allow for proper ventilation: Ensure that there is enough space around the refrigerator for proper air circulation. Leave a gap of at least 5 cm on the sides and back of the appliance. 3. Maintain proper clearance: Make sure there is enough space above the refrigerator to open the doors fully without any obstruction. Leave a clearance of at least 10 cm between the top of the refrigerator and any overhead cabinets or structures. 4. Check the levelness: Use a spirit level to ensure that the refrigerator is level from front to back and side to side. Adjust the adjustable feet at the bottom front of the appliance to achieve proper leveling. 5. Secure the refrigerator: Once the appliance is in its desired position, ensure that it is stable and does not wobble. If needed, adjust the feet or use shims to achieve stability. By following these steps, you can position the John Lewis JLFFW 2012 refrigerator in your kitchen in an optimal and safe manner.
To level the John Lewis JLFFW 2012 refrigerator using the adjustable feet, follow these steps: 1. Ensure that the refrigerator is in its desired position in your kitchen. 2. Locate the adjustable feet at the bottom front of the appliance. 3. Use a wrench or pliers to grip the adjustable feet. 4. Turn the adjustable feet clockwise to raise the refrigerator or counterclockwise to lower it. 5. Adjust the feet gradually, checking the levelness of the refrigerator after each adjustment. 6. Use a spirit level to ensure that the refrigerator is level from front to back and side to side. 7. Continue adjusting the feet until the refrigerator is level and stable. 8. Once the refrigerator is level, ensure that all four feet are firmly on the floor. 9. Check the stability of the refrigerator by gently pushing it from different angles. 10. If needed, make further adjustments to the feet to achieve proper leveling and stability. By following these steps, you can level the John Lewis JLFFW 2012 refrigerator using the adjustable feet, ensuring optimal performance and functionality.
To troubleshoot common issues with the John Lewis JLFFW 2012 refrigerator, follow these steps: 1. Water flows on the ground: - Possible cause: The melting water outlet does not flow in the evaporative tray above the compressor. - Solution: Attach the melting water outlet to the evaporative tray. 2. Excessive frost and ice: - Possible cause: Products are not wrapped correctly. - Solution: Refer to the "Hints for refrigeration" and "Hints for freezing" instructions in the manual for proper wrapping techniques. 3. High temperature in the appliance: - Possible causes: The door is not closed correctly or the temperature regulator is set incorrectly. - Solutions: Ensure the door is closed properly and set a higher temperature if needed. 4. The appliance does not operate: - Possible causes: The appliance is switched off, the mains plug is not connected correctly, or there is no power in the mains socket. - Solutions: Switch on the appliance, check the connection of the mains plug, and test the power in the mains socket with another electrical appliance. Contact a qualified electrician if necessary. 5. The lamp does not work: - Possible cause: The lamp is defective. - Solution: Refer to the manual for instructions on replacing the lamp with one of the same power. If the troubleshooting steps do not resolve the issue, please refer to the "Repairs - After Sales Service" section in the manual or contact your local John Lewis branch for further assistance.
Yes, the manual of the John Lewis JLFFW 2012 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the John Lewis and is the answer not in the manual?
Question and answer
Number of questions: 0