View the manual for the Joerns Hoyer Presence here, for free. This manual comes under the category lifters and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Joerns Hoyer Presence or do you need help? Ask your question here
The Joerns Hoyer Presence is a lifter designed to assist with patient transfers, specifically in healthcare settings. It is commonly used in hospitals, nursing homes, and other medical facilities to safely and efficiently move individuals with mobility limitations. The Joerns Hoyer Presence is constructed with sturdy and resilient materials, ensuring its durability and longevity. It is equipped with innovative features that enhance its functionality and ease of use. The lifter is designed to provide optimal support and stability during transfers, reducing the risk of injuries for both the patient and the caregiver. This lifter has a weight capacity that meets industry standards, allowing it to safely lift and transfer patients of varying sizes and weights. It is equipped with a comfortable and ergonomic sling that promotes proper positioning and reduces discomfort for the patient. The Joerns Hoyer Presence is compact and easy to maneuver, making it suitable for use in tight spaces. It is equipped with intuitive controls that are straightforward and user-friendly, improving the overall efficiency and effectiveness of patient transfers. Safety is a top priority with the Joerns Hoyer Presence, as it is designed with built-in safety features to prevent accidents or mishaps during transfers. These features include emergency stop buttons and safety locks to ensure the lifter remains secure and stable throughout the transfer process. Overall, the Joerns Hoyer Presence is a reliable and efficient lifter that meets the demanding needs of healthcare professionals. Its robust construction, user-friendly design, and safety features make it a trusted choice for patient transfers in healthcare settings.
| Brand | Joerns Hoyer |
| Model | Presence |
| Product | lifter |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Joerns Hoyer Presence below.
To assemble the Joerns Hoyer Presence patient lift, follow these steps: 1. Start by identifying the components of the lift, including the boom, spreader bar, electric actuator, mast extrusion, rear castor, push handle, battery/control pack, front castor, foot push pad, and straight line steering device. 2. Position the base of the lift in a suitable location, ensuring it is stable and secure. 3. Attach the rear castor to the base of the lift, making sure it is securely locked in place. 4. Attach the front castor to the base, ensuring it is properly aligned and locked. 5. Connect the mast extrusion to the base, ensuring it is securely fastened. 6. Attach the boom to the mast extrusion, making sure it is properly aligned and locked in place. 7. Install the spreader bar onto the boom, ensuring it is securely attached. 8. Connect the electric actuator to the boom, following the manufacturer's instructions. 9. Attach the push handle to the lift, ensuring it is securely fastened. 10. Install the battery/control pack, making sure it is properly connected and secured. 11. Finally, check all the connections and components to ensure they are properly assembled and secure before using the lift. Please note that these steps are a general guide for assembling the Joerns Hoyer Presence patient lift. For detailed instructions and safety precautions, refer to the manual provided with the product.
If the Joerns Hoyer Presence lift fails the certification test, follow these steps: 1. Check the test certificate that was supplied with the lift. Keep this document for reference purposes. 2. Review the maintenance schedule included in the manual. Ensure that you are following the recommended maintenance procedures. 3. If you are unsure about your country's servicing requirements, consult your dealer or a local government agency for guidance. 4. Conduct a thorough inspection of the lift components. Check the spreader bar for freedom of rotation and swing, and inspect the attachment of the boom to the mast for minimal side movement. 5. Verify the operation of the mast-locking device and ensure that the mast fully engages into the socket. 6. Check the actuator for correct operation and listen for any unusual noise. 7. Test the emergency stop button and confirm the functioning of the hand control and redundant controls. 8. Inspect the batteries housed in the power pack and ensure that the connections remain clean. 9. Check the legs for proper operation in both full extensions. 10. Verify the firm attachment and free rotation of all castors. 11. Clean the lift with ordinary soap and water or a hard surface disinfectant, avoiding harsh chemical cleaners or abrasives. 12. Lubricate pivot joints with a silicone-based oil, including mast and boom connections if required. 13. Ensure that the hand set is fully plugged into the controller. 14. Securely fit the quick release pin before lifting. 15. Check all nuts, bolts, screws, and fasteners for excessive wear and tightness, replacing as required. By following these steps, you can address any issues that arise if the Joerns Hoyer Presence lift fails the certification test.
To properly maintain the Joerns Hoyer Presence lift, follow these recommended maintenance procedures: 1. Daily Checks: - Ensure the lift moves freely on its castors. - Check that the spreader bar is free to rotate and swing, and that it is firmly attached to the boom. - Make sure the mast is fully engaged into the mast slot and that the mast locking device is securely tightened. - Examine the sling hooks on the spreader bar and side suspenders for excessive wear. Do not use if in doubt. - Verify that the legs open and close correctly. - Operate the hand control to confirm that the boom raises and lowers satisfactorily. - Check for any low battery indicator when using the hand control. If indicated, do not use and charge the lift immediately. - Test the operation of the emergency stop button. - Inspect slings for fraying or other damage. Do not use any damaged or worn slings. 2. Annual Service: - Check the spreader bar for freedom of rotation and swing, and inspect the central pivot for wear. - Verify the attachment of the boom to the mast and ensure minimal side movement of the boom. - Check the operation of the mast-locking device and the bottom actuator. - Ensure the actuator operates correctly and listen for any unusual noise. - Test the emergency stop button, hand control socket, and redundant controls. - Inspect the batteries housed in the power pack and ensure clean connections. - Check the operation of the legs in both full extensions. - Verify the firm attachment and free rotation of all castors. - Clean the lift with ordinary soap and water or a hard surface disinfectant, avoiding harsh chemical cleaners or abrasives. - Lubricate pivot joints with a silicone-based oil, including mast and boom connections if required. - Ensure the hand set is fully plugged into the controller. - Securely fit the quick release pin before lifting. - Check all nuts, bolts, screws, and fasteners for excessive wear and tightness, replacing as required. By following these maintenance procedures, you can ensure the optimal and safe working condition of the Joerns Hoyer Presence lift.
The Joerns Hoyer Presence lift can be used for lifting and transferring patients in different positions. Here are the key points from the manual: - The Hoyer Presence lift is suitable for patients in the SITTING, SITTING/RECUMBENT, and RECUMBENT positions. - It is designed to support and promote safe patient handling and transfer for both the patient and caregiver. - The lift incorporates a 6-point cradle as standard, which can be used with the Hoyer range of slings. - There is also an option for a 4-point cradle as an add-on accessory. - Examples of slings suitable for use with the Hoyer Presence lift include Hoyer Quickfit, Hoyer Access, Hoyer Full Back, Hoyer Comfort, Hoyer Quickfit Deluxe, and Hoyer Long Seat. - It is important to conduct a risk assessment and ensure safe transfer practices when using the lift. - The lift is designed and tested for a minimum service life of ten (10) years, subject to following the use and maintenance procedures stated in the manual. By following these guidelines, you can safely use the Hoyer Presence lift to lift and transfer patients in different positions.
The Joerns Hoyer Presence lift is compatible with a range of slings. Although the specific slings compatible with the Hoyer Presence lift are not mentioned in the available information, the manual should provide detailed information on the compatible slings. It is recommended to refer to the manual or contact the manufacturer or dealer for the complete list of slings that are compatible with the Hoyer Presence lift. They will be able to provide you with the most accurate and up-to-date information regarding the compatible slings for the lift.
Yes, the manual of the Joerns Hoyer Presence is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Joerns Hoyer and is the answer not in the manual?
Question and answer
Number of questions: 0