View the manual for the JLab Fit Sport 3 here, for free. This manual comes under the category headphones and has been rated by 1 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the JLab Fit Sport 3 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the JLab Fit Sport 3.
The JLab Fit Sport 3 headphone is a device designed for those in need of secure and comfortable audio during physical activities. With an on/off switch, users have control over their listening experience. Unfortunately, there is no power LED indicator to provide information on the headphone's status. The headphone does not include an airplane plug or a Velcro cable strap, which may limit its convenience for certain situations. Additionally, a battery charger is not included, meaning users will need to provide their own power source. While lacking a belt clip, the design of the JLab Fit Sport 3 prioritizes active use rather than DJing. The headphone is not specifically suitable for DJs. With a maximum sound pressure level of 110 dB, users can enjoy an immersive audio experience. However, there is no heart rate monitor feature available. The JLab Fit Sport 3 does not have the Intel inside feature and has a low power consumption of 100 mA when in standby mode. It does not include an XLR-5 connector or a mini XLR (3-pin) connector. Additionally, there is no IR connectivity feature. This headphone is designed for adults and is not meant for use by children. In conclusion, the JLab Fit Sport 3 is a headphone with features that prioritize active use and convenience. However, it lacks certain functionalities such as an airplane plug, a Velcro cable strap, and a battery charger, which may limit its versatility for some users. Nonetheless, with a maximum sound pressure level of 110 dB, users can enjoy powerful and immersive audio during their physical activities.

| Brand | JLab |
| Model | Fit Sport 3 | IEUEBFITSPORTRBLK123 |
| Product | headphone |
| EAN | 0812887018104 |
| Language | English |
| Filetype | User manual (PDF) |
| Airplane plug | No |
| Velcro cable strap | No |
| Battery charger included | No |
| Power LED | No |
| Belt clip | No |
| Suitable for DJs | No |
| Heart rate monitor | No |
| Intel inside | No |
| Power consumption (standby) | 100 mA |
| Mini XLR (3-pin) connector | No |
| IR connectivity | No |
| Coiled cable | No |
| Yes | |
| Brand compatibility | Apple |
| User guide | Yes |
| Digital Signal Processing (DSP) | No |
| Extension cable | No |
| Cable management | No |
| Storage pouch | No |
| USB charger included | No |
| Plug adapter | No |
| Near Field Communication (NFC) | No |
| Cord clip | Yes |
| Charger clip | No |
| Proximity sensor | No |
| Calories burned | No |
| Distance traveled | No |
| Active minutes | No |
| Voice guidance | No |
| Detachable belt-clip | No |
| Manual | Yes |
| Heart rate contact sensors | No |
| Charging voltage | 5 V |
| 2.5 mm connector | No |
| Packaging content | In the box: Fit Sport 3 Earbuds, 4 Sets Gel Eartips, 1 Set Cush Fins, 1 Cloud Foam Eartips. |
| On/off switch | Yes |
| Sound pressure level (max) | 110 dB |
| Designed for children | No |
| Volume control | Buttons |
| Operating keys | Multi-key |
| Plug and Play | No |
| Foldable | No |
| International Protection (IP) code | IP55 |
| Detachable cable | No |
| Accelerometer | No |
| Protection features | Waterproof |
| Product type | Headset |
| Product color | Black |
| Headset type | Binaural |
| Wearing style | Ear-hook, In-ear, Neck-band |
| Recommended usage | Sports |
| Country of origin | China |
| XLR-5 connector | No |
| RF connectivity | No |
| Bluetooth version | 5.0 |
| Microphone in | Yes |
| Bluetooth profiles | A2DP, AVRCP, HFP, HSP |
| Wireless range | 9.144 m |
| 6.35 mm connector | No |
| USB connector | Micro-USB |
| Lightning connector | No |
| Connectivity technology | Wireless |
| Bluetooth | Yes |
| 3.5 mm connector | No |
| USB connectivity | Yes |
| Headphone frequency | 20 - 20000 Hz |
| Headphone sensitivity | 110 dB |
| Impedance | 32 Ω |
| Driver unit | 8 mm |
| Magnet type | Neodymium |
| Acoustic system | Closed |
| Driver type | Dynamic |
| Total Harmonic Distortion (THD) | 15 % |
| No | |
| Intraaural headphones type | In-ear monitors |
| Ear coupling | Intraaural |
| Microphone sensitivity | 42 dB |
| Number of microphones | 1 |
| No | |
| Microphone type | In-line |
| Weight | 15 g |
| Height | 626 mm |
| Width | 30 mm |
| Depth | 19 mm |
| Cables included | Micro-USB |
| AC adapter included | No |
| Carrying case | No |
| Pouch | No |
| Quick start guide | Yes |
| Ear pads | Yes |
| Extra earbuds | No |
| Charger | Yes |
| Warranty card | Yes |
| Accessories included in set | 4 sizes silicone eartips |
| Charging case | No |
| Standby time | 150 h |
| Battery type | Built-in battery |
| Battery technology | Lithium Polymer (LiPo) |
| Battery capacity | 100 mAh |
| Rechargeable battery | Yes |
| Charging source | DC |
| Battery voltage | 5 V |
| Battery recharge time | 1 h |
| Continuous audio playback time | 6 h |
| FM radio | No |
| Card reader integrated | No |
| Music player | No |
| Package weight | 69 g |
| Package type | Box |
| Package height | 141 mm |
| Package width | 32.5 mm |
| Package depth | 103 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the JLab Fit Sport 3 below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
The newer headphones generally have a small microphone built in which allows for calling.
Noise cancelling ensures that ambient noise is reduced.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
The JLab Fit Sport 3 has a weight of 15 g.
The JLab Fit Sport 3 has a height of 626 mm.
It takes 1 h to charge the battery of the JLab Fit Sport 3.
The JLab Fit Sport 3 has a width of 30 mm.
The JLab Fit Sport 3 has a depth of 19 mm.
No, the JLab Fit Sport 3 does not have an airplane plug. This means that it may not be as convenient for users who frequently travel by plane and want to use their headphones during flights.
No, the JLab Fit Sport 3 does not come with a Velcro cable strap. This means that users will not have the option to neatly secure and organize the headphone cable when not in use.
No, a battery charger is not included with the JLab Fit Sport 3. This means that users will need to separately provide their own charger to ensure they can easily recharge the headphones when needed.
Yes, the JLab Fit Sport 3 has an on/off switch. This allows users to easily power the headphones on or off, providing convenience and control over the device's power usage.
No, the JLab Fit Sport 3 does not have a power LED. While this may not affect the overall functionality of the headphones, it means that users will not have a visual indicator of the power status of the device.
To pair the JLab Fit Sport 3 headphone with your device, follow these steps: 1. Turn on the Bluetooth on your device by going to the device settings. 2. Press and hold the button on the JLab Fit Sport 3 headphone for 10 seconds, then release it. 3. The light on the headphone will flash red and blue, indicating that it is in pairing mode. 4. On your device, select "JLab BT" from the list of available Bluetooth devices to connect. 5. Once connected, the light on the headphone will slow blink blue, indicating a successful pairing. 6. The JLab Fit Sport 3 headphone will now be paired with your device and ready to use. Please note that after the initial pairing, the JLab Fit Sport 3 headphone will automatically connect to your device when powered back on. If you encounter any issues during the pairing process, make sure to check that Bluetooth is enabled on your device and that the headphone is in pairing mode.
If the JLab Fit Sport 3 headphone is not automatically connecting to your device, you can try the following troubleshooting steps: 1. Turn off the Bluetooth on your device and then turn it back on in the device settings. 2. In the device settings, forget the JLab BT (the name of the headphone). 3. Repeat the first-time setup process for Bluetooth pairing as mentioned in the manual. 4. If you still do not see the JLab BT in the list of available Bluetooth devices, repeat the first-time setup process for Bluetooth pairing again. 5. If the JLab BT does not reconnect to your device after powering it on, go to the Bluetooth settings on your device and make sure the JLab BT is selected as the desired device for connection. 6. If you have multiple devices that were previously connected to the JLab BT, turn off Bluetooth on the unwanted devices and turn on Bluetooth on the device you want to connect to. Please note that the JLab Fit Sport 3 headphone can remember up to 8 devices and will try to auto-connect to the last device used.
The JLab Fit Sport 3 headphone has several button functions. Here are the functions of each button: 1. Power On/Off: To turn on the headphone, press and hold the button for 3 seconds. To turn it off, press and hold the button for 5 seconds. 2. Play/Pause: Click the button once to play or pause audio playback. 3. Answer/Hang Up Calls: Click the button once to answer an incoming call or hang up an ongoing call. 4. Activate Siri (iOS) or "OK Google" (Android): Click the button twice to activate Siri on iOS devices or "OK Google" on Android devices. 5. Bluetooth Pairing: Follow the First Time Setup process for Bluetooth pairing as mentioned in the manual. Additionally, the headphone has volume control and track navigation functions: - Volume Down: Click the button once to decrease the volume. - Volume Up: Click the button once to increase the volume. - Track Backward: Click and hold the button for 2+ seconds to go to the previous track. - Track Forward: Click and hold the button for 2+ seconds to go to the next track. The JLab Fit Sport 3 headphone also offers different EQ settings: - Quick press both buttons for different EQ settings. The headphone will cycle through 3 EQ settings: JLab Signature (One Beep), Balanced (Two Beeps), and Bass Boost (Three Beeps). Please note that the specific functions may vary depending on the device and application you are using with the headphone.
If you are not hearing any voice prompts from the JLab Fit Sport 3 headphone, you can try the following troubleshooting steps: 1. Make sure the headphone is powered on. You should hear the voice prompt "HELLO" when the power is on. 2. Ensure that the headphone is in pairing mode. The voice prompt "READY TO PAIR" indicates that the headphone is ready to connect to your Bluetooth device. 3. Check if the headphone is successfully connected to your Bluetooth device. The voice prompt "YOU'RE CONNECTED" confirms a successful connection. 4. If you are not hearing any voice prompts, try turning off the headphone and then turning it back on. 5. Make sure the volume on the headphone is not muted or set too low. Adjust the volume accordingly. 6. If the issue persists, try resetting the headphone by following the First Time Setup process for Bluetooth pairing as mentioned in the manual. Please note that the voice prompts may vary depending on the specific model and firmware version of the JLab Fit Sport 3 headphone.
To properly fit and charge the JLab Fit Sport 3 headphone, follow these steps: 1. Fitting: Start by selecting the appropriate ear tips from the provided options (small, medium, or large) that best fit your ears. Insert the ear tips into your ears, ensuring a secure and comfortable fit. Adjust the ear hooks for added stability during active use. 2. Charging: Locate the charging port on the headphone and connect the included USB charging cable. Plug the other end of the cable into a USB power source, such as a computer or wall adapter. The LED indicator on the headphone will turn red to indicate that it is charging. Allow the headphone to fully charge, which takes approximately 2 hours. The LED indicator will turn blue when the headphone is fully charged. 3. Power On/Off: To power on the headphone, press and hold the power button for 3 seconds until the LED indicator flashes blue. To power off the headphone, press and hold the power button for 5 seconds until the LED indicator turns off. 4. Repeat the charging process whenever the battery is low to ensure uninterrupted use. Please note that it is important to properly fit the headphone for optimal sound quality and comfort. Additionally, always use the provided charging cable and avoid using third-party chargers to prevent damage to the headphone.
Yes, the manual of the JLab Fit Sport 3 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the JLab and is the answer not in the manual?
Question and answer
Number of questions: 0