JETI JMS-MSW manual

JETI JMS-MSW
5.1 · 1
PDF manual
 · 4 pages
English
manualJETI JMS-MSW

User manual: Magnetic switch

-2-
Fig. 1: Magnetic switch application connections
Every individual device must be connected to the correct output from the Magnetic switch. If the
inverted output connection is confused for the non-inverted output, the switch will operate in reverse!
This means that the green LED on the magnetic switch will indicate the OFF state of the device!
If it is necessary to separate two circuits to prevent interference, be sure that the wiring is correct.
One circuit (the one where the interference is possible) must be connected to one of the switch
outputs that are optically isolated. The other circuit must be connected to one of the switch outputs
that are not optically isolated, see Fig. 1: Magnetic switch connections. When optical isolation is
desired, the –poles of the separated circuits must not be connected, as well as the + poles must not be
connected.
The Magnetic switch is powered from unseparated outputs, so at least one of these outputs must be
connected. If the power supply is interrupted when the magnetic switch is turned on, the devices
connected to optically isolated output are turned off! For example: in Fig 1, when power is
restored, the ignition would be turned off but the Rx would stay turned on.

3. The function of the Magnetic switch

The Magnetic switch is designed to switch the JETI model products on and off. For switching on,
the magnetic key must be placed on the small target in such a way that the small hole in the key and
the dot on the switch target has the same orientation. The Magnetic switch is equipped with a green
LED indicating the „switched on“ condition.

Manual

View the manual for the JETI JMS-MSW here, for free. This manual comes under the category radio controlled toys and has been rated by 1 people with an average of a 5.1. This manual is available in the following languages: English. Do you have a question about the JETI JMS-MSW or do you need help? Ask your question here

Need help?

Do you have a question about the JETI and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

JETI JMS-MSW specifications

Below you will find the product specifications and the manual specifications of the JETI JMS-MSW.

General
BrandJETI
ModelJMS-MSW | JMS-MSW
Productradio controlled toy
EAN8595245914035
LanguageEnglish
FiletypeUser manual (PDF)
Features
CertificationCE
TypeRadio-Controlled (RC) Model Parts
Product colorBlack
Product typeSwitching module
Weight & dimensions
Width45 mm
Depth26 mm
Height11 mm
Weight11 g
Power
Maximum current0.0007 A
Voltage3.5 - 59 V
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the JETI JMS-MSW below.

What is the weight of the JETI JMS-MSW?

The JETI JMS-MSW has a weight of 11 g.

What certifications does the JETI JMS-MSW have?

The JETI JMS-MSW has the following certifications: CE.

A battery in my radio controlled toy has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

What is the height of the JETI JMS-MSW?

The JETI JMS-MSW has a height of 11 mm.

What is the width of the JETI JMS-MSW?

The JETI JMS-MSW has a width of 45 mm.

What is the depth of the JETI JMS-MSW?

The JETI JMS-MSW has a depth of 26 mm.

Is the manual of the JETI JMS-MSW available in English?

Yes, the manual of the JETI JMS-MSW is available in English .

Is your question not listed? Ask your question here

No results