JETI J-MSW-200-RCSW manual

JETI J-MSW-200-RCSW
5.6 · 1
PDF manual
 · 8 pages
English
manualJETI J-MSW-200-RCSW

User Manual: Electronic switch Main Switch

-2-

1. Introduction

Main Switch is an electronic switch designed primarily for switching of the main power supply for an RC model. It adds
an element of safety when handling the model, without the need to physically disconnect the model´s batteries. A big
advantage of electronic switches in comparison to mechanical switches is, in general, their higher reliability as far as
vibration resistance is concerned. Another advantage of the electronic switch is its ability to withstand an unlimited number
of switching cycles. Electronic switches have no moving parts like contacts which would be worn out during the switching
processes, therefore their longevity is extremely high. Moreover, they are not prone to spontaneous and unexpected false
tripping with known disastrous effects. Last but not least, electronic switches offer a much lower inherent transient
resistance in comparison to mechanical switches. The Main Switch prevents the connectors from sparking when
connecting the batteries, thus it can also replace Anti Spark plugs.
The Main Switch is shipped with a magnetic switch. The magnetic switch instructions can be found on the
manufacturer´s website. It is also possible to use the optional RC Switch instead of the magnetic switch.
The Main Switch is primarily designed for switching the main power supply of the RC models, but can also be used in
applications where switching a DC power supply is needed.

2. Connection

The power supply is connected to the Main Switch using two input wires with cross sections of 6 or 8mm
2
. The output
voltage is available at two cables with cross sections of 6 or 8mm
2
. The output three-wire cable with the JR connector is
used for telemetry data transmission. The output three-pin connector is used to connect the supplied magnetic switch or
the RC Switch.
The Main Switch connects and disconnects the negative pole - , the + pole is always connected and is never
disconnected!
Fig. 1: Connection of input and output cables
Be sure to connect the power supply wires correctly; always connect the red cable to the + pole of the
accumulator, the black cable to the – pole of the accumulator. Pay attention when connecting outputs and inputs,
they must not be swapped. Failure to follow these requirements may result in irreversible damage to the Main
Switch!! Only connect batteries to the input IN and connect speed controllers, receivers, servos etc. to the output
OUT.

Manual

View the manual for the JETI J-MSW-200-RCSW here, for free. This manual comes under the category radio controlled toys and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the JETI J-MSW-200-RCSW or do you need help? Ask your question here

Need help?

Do you have a question about the JETI and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

JETI J-MSW-200-RCSW specifications

Below you will find the product specifications and the manual specifications of the JETI J-MSW-200-RCSW.

General
BrandJETI
ModelJ-MSW-200-RCSW | J-MSW-200-RCSW
Productradio controlled toy
EAN8595245900700
LanguageEnglish
FiletypeUser manual (PDF)
Features
Input voltage range9 - 51 V
CertificationCE
TypeRadio-Controlled (RC) Model Parts
Product colorBlack
Product typeSwitching module
Weight & dimensions
Width80 mm
Depth36 mm
Height25 mm
Weight140 g
Power
Maximum current200 A
No-load current0.00011 A
Voltage9 - 51 V
Operational conditions
Operating temperature (T-T)-20 - 85 °C
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the JETI J-MSW-200-RCSW below.

What is the weight of the JETI J-MSW-200-RCSW?

The JETI J-MSW-200-RCSW has a weight of 140 g.

What certifications does the JETI J-MSW-200-RCSW have?

The JETI J-MSW-200-RCSW has the following certifications: CE.

A battery in my radio controlled toy has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

What is the height of the JETI J-MSW-200-RCSW?

The JETI J-MSW-200-RCSW has a height of 25 mm.

What is the width of the JETI J-MSW-200-RCSW?

The JETI J-MSW-200-RCSW has a width of 80 mm.

What is the depth of the JETI J-MSW-200-RCSW?

The JETI J-MSW-200-RCSW has a depth of 36 mm.

Is the manual of the JETI J-MSW-200-RCSW available in English?

Yes, the manual of the JETI J-MSW-200-RCSW is available in English .

Is your question not listed? Ask your question here

No results