JETI Central Box 200 manual

JETI Central Box 200
9.9 · 1
PDF manual
 · 38 pages
English
manualJETI Central Box 200
EN
1. Introduction ..................................................................................... 3 EN
1.1 Attributes ................................................................................... 4 EN
2. Description ........................................................................................ 4 EN
2.1 Central Box 200 ....................................................................... 4 EN
2.2. Central Box 100 ....................................................................... 6 EN
2.3 Magnetic switch ( Central Box 200 only) ............................ 7 EN
3. Connection ...................................................................................... 8 EN
3.1 Power supply of Central Box 200 ........................................... 8 EN
3.2 Power supply of Central Box 100 ......................................... 10 EN
3.3 Overload protection of servos ............................................ 12 EN
3.4 Connecting Central Box PPM variant ............................ 12 EN
3.5 Connecting Central Box – EX Bus variant ........................ 14 EN
3.6 Alternative function - logical input .................................... 16 EN
3.7 Alternative functions - logical output ............................... 16 EN
3.8 OUT/IN pin .............................................................................. 17 EN
4. Configuration via JETIBOX ....................................................... 19 EN
4.1 Actual values .......................................................................... 20 EN
4.2 Minimum / Maximum values ............................................. 20 EN
4.3 Setting ..................................................................................... 21EN
4.4 Out Pin Set ............................................................................... 22 EN
4.5 Alarms .................................................................................... 24 EN
4.6 Service information .............................................................. 24 EN
1 EN

Manual

View the manual for the JETI Central Box 200 here, for free. This manual comes under the category radio controlled toys and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the JETI Central Box 200 or do you need help? Ask your question here

Need help?

Do you have a question about the JETI and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

JETI Central Box 200 specifications

Below you will find the product specifications and the manual specifications of the JETI Central Box 200.

General
BrandJETI
ModelCentral Box 200 | J-CB-200-RS
Productradio controlled toy
EAN8595245909949, 8595245909932
LanguageEnglish
FiletypeUser manual (PDF)
Operational conditions
Operating temperature (T-T)-20 - 75 °C
Weight & dimensions
Width63 mm
Depth38 mm
Height17 mm
Weight30 g
Power
Operating voltage (min)4 V
Operating voltage (max)14 V
Packaging data
Quantity per pack1 pc(s)
Features
Product typeRemote control switch
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the JETI Central Box 200 below.

What is the weight of the JETI Central Box 200?

The JETI Central Box 200 has a weight of 30 g.

A battery in my radio controlled toy has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

What is the height of the JETI Central Box 200?

The JETI Central Box 200 has a height of 17 mm.

What is the width of the JETI Central Box 200?

The JETI Central Box 200 has a width of 63 mm.

What is the depth of the JETI Central Box 200?

The JETI Central Box 200 has a depth of 38 mm.

Does the JETI Central Box 200 have a wide operating voltage range?

Yes, the JETI Central Box 200 has an operating voltage range from 4V to 14V, which allows for versatile use with different power sources.

How many units come in a pack of the JETI Central Box 200?

The JETI Central Box 200 comes with 1 piece in a pack. This means users will receive a single unit with their purchase.

What type of product is the JETI Central Box 200?

The JETI Central Box 200 is a remote control switch. This indicates that it is specifically designed for controlling different functions remotely.

How does the operating voltage range of the JETI Central Box 200 compare to other similar products?

The operating voltage range of 4V to 14V for the JETI Central Box 200 is considered high compared to other similar products, providing users with more flexibility in power options.

What should I do if the overload protection feature of the Central Box is not functioning correctly due to insufficient power supply?

If the overload protection feature of the JETI Central Box 200 is not functioning correctly due to insufficient power supply, follow these steps: 1. Power the Central Box 200 only through the BATT input supplied with an MPX connector. 2. Avoid supplying power to the Central Box through the outputs for servos labeled Y1-8, sensors labeled Ext, or receivers labeled Rx1-2. 3. Ensure correct connection of servos to the Central Box to prevent overload issues. 4. Note that the Central Box has an overload protection circuit on every servo output, disconnecting the affected servo output in case of overload while keeping the remaining servo outputs powered. 5. Do not connect more Central Box outputs to one servo or use a Y cable to connect two servos to one output. 6. Be cautious as Rx1, Rx2, Ext1, and OUT/IN are not protected against overload, and overloading can cause irreversible damage to the Central Box.

How can I adjust and display parameters for sensors connected to inputs Ext1, Ext2/15, and Ext3/14 using the JETIBOX terminal?

To adjust and display parameters for sensors connected to inputs Ext1, Ext2/15, and Ext3/14 using the JETIBOX terminal for the JETI Central Box 200, follow these steps: 1. Connect the JETIBOX terminal to the Central Box output Ext1. The startup screen will show device identification and battery capacity. 2. Press the R button to access the expander menu. 3. In the expander menu, the second line displays the sensors connected to Ext1, Ext2/15, and Ext3/14. 4. Use the U and D buttons to navigate through the expander inputs. The selected input is marked with a curly bracket. 5. Press the R button to enter a selected sensor and adjust its parameters. 6. To return from the sensor menu, hold the L button for an extended time or a short time if in the basic sensor menu. 7. If an input is marked with 1}, it means no compatible device is connected or the input is not properly configured. 8. Press the D button to navigate back to the Central Box menu.

How do I navigate from the initial screen of the Central Box to its menu using the D button?

To navigate from the initial screen of the JETI Central Box 200 to its menu using the D button, follow these steps: 1. Push the D button (down) on the JETIBOX. 2. This action will transition you from the initial screen to the menu of the Central Box 200. By pressing the D button, you can easily access the menu of the Central Box 200 from the initial screen.

Is the manual of the JETI Central Box 200 available in English?

Yes, the manual of the JETI Central Box 200 is available in English .

Is your question not listed? Ask your question here

No results