JBL Control 24CT Micro manual

JBL Control 24CT Micro
7.2 · 2
PDF manual
 · 20 pages
English
manualJBL Control 24CT Micro
JBL Professional
8500 Balboa Blvd, P.O. Box 2200
Northridge, CA 91329 U.S.A.
A Harman International Company
MAN_C24MICRO
Revision D

Manual

View the manual for the JBL Control 24CT Micro here, for free. This manual comes under the category speakers and has been rated by 2 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the JBL Control 24CT Micro or do you need help? Ask your question here

Need help?

Do you have a question about the JBL and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

JBL Control 24CT Micro specifications

Below you will find the product specifications and the manual specifications of the JBL Control 24CT Micro.

General
BrandJBL
ModelControl 24CT Micro | JBL0100
Productspeaker
EAN0050036904650
LanguageEnglish
FiletypeUser manual (PDF)
Loudspeakers
Speaker type-
Audio output channels- channels
Speaker placementIn-wall/in-ceiling
Number of drivers1
TweeterYes
Tweeter diameter12 mm
Tweeter diameter (imperial)0.5 "
WooferYes
Woofer diameter (imperial)4.5 "
Woofer diameter115 mm
Ports & interfaces
Binding postYes
Connectivity technologyWired
Bluetooth-
Audio
RMS rated power30 W
Frequency range85 - 25000 Hz
Sensitivity94 dB
Power
Transformer taps2, 4 W
Performance
Product colorWhite
Recommended usageUniversal
Housing materialSteel
Weight & dimensions
Width195 mm
Depth195 mm
Height106 mm
Weight2000 g
Diameter195 mm
Packaging data
Package weight4400 g
Packaging content
Quantity per pack1 pc(s)
Amplifier
Amplifier-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the JBL Control 24CT Micro below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the weight of the JBL Control 24CT Micro?

The JBL Control 24CT Micro has a weight of 2000 g.

What is the height of the JBL Control 24CT Micro?

The JBL Control 24CT Micro has a height of 106 mm.

What is the width of the JBL Control 24CT Micro?

The JBL Control 24CT Micro has a width of 195 mm.

What is the depth of the JBL Control 24CT Micro?

The JBL Control 24CT Micro has a depth of 195 mm.

Does the JBL Control 24CT Micro have a tweeter?

Yes, it has a tweeter. This means that it is capable of producing high-frequency sounds with clarity, enhancing the overall audio experience for the user.

What is the diameter of the tweeter in the JBL Control 24CT Micro?

The tweeter has a diameter of 12 mm (0.5"). This size is suitable for producing crisp and clear high-frequency sounds, providing an immersive audio experience.

Does the JBL Control 24CT Micro have a woofer?

Yes, it has a woofer. Having a woofer allows for the production of low-frequency sounds, providing a balanced and full-range audio output for the user.

What is the diameter of the woofer in the JBL Control 24CT Micro?

The woofer has a diameter of 115 mm (4.5"). This size is ideal for delivering deep and impactful bass, enhancing the overall audio performance of the speaker.

Does the JBL Control 24CT Micro have binding posts?

Yes, it has binding posts. This feature allows for secure and convenient connectivity to audio sources, ensuring a reliable connection for the user.

How can I ensure proper installation of the JBL Control 24CT Micro speaker?

To ensure proper installation of the JBL Control 24CT Micro speaker, follow these steps: 1. Determine the installation location: Choose a suitable location on the ceiling where you want to install the speaker. Consider factors such as the desired sound coverage area and any obstructions that may affect the speaker's performance. 2. Prepare the installation brackets: If necessary, use optional pre-installation brackets provided by JBL. These brackets can be used for suspended ceilings or sheetrock ceilings. They help secure the speaker in place and provide a template for cutouts in the ceiling. 3. Mark the cutout area: Use the pre-installation bracket as a guide to mark the cutout area on the ceiling. Ensure that the dimensions are accurate and align with the bracket. 4. Cut the hole: Use a router-type cutting tool to cut the hole in the ceiling according to the marked dimensions. Be careful to follow safety precautions and avoid damaging any existing wiring or structures. 5. Mount the speaker: Insert the JBL Control 24CT Micro speaker into the cutout hole. Make sure it fits securely and aligns properly with the ceiling surface. The mounting ears of the speaker should lock into place, ensuring a stable installation. By following these steps, you can ensure a proper installation of the JBL Control 24CT Micro speaker on your ceiling.

What should I do if the JBL Control 24CT Micro speaker is not producing sound?

If the JBL Control 24CT Micro speaker is not producing sound, you can try the following troubleshooting steps: 1. Check the connections: Ensure that the speaker is properly connected to the audio source or amplifier. Verify that the cables are securely plugged into the appropriate input/output jacks. 2. Adjust the volume: Make sure that the volume level is set appropriately on both the audio source and the speaker. Increase the volume gradually to avoid sudden loud sounds. 3. Test the audio source: Connect a different audio source, such as a different device or music player, to the speaker. This will help determine if the issue is with the original audio source or the speaker itself. 4. Inspect the speaker wires: Check the speaker wires for any damage or loose connections. Ensure that the wires are securely connected to the speaker terminals and the audio source. 5. Reset the speaker: If the above steps do not resolve the issue, try resetting the speaker. Disconnect the power source, wait for a few seconds, and then reconnect the power. If the problem persists after following these steps, it is recommended to contact JBL Professional for further assistance.

How do I adjust the coverage area of the JBL Control 24CT Micro speaker?

To adjust the coverage area of the JBL Control 24CT Micro speaker, follow these steps: 1. Position the speaker: Determine the desired coverage area and position the speaker accordingly. The speaker's orientation and placement will affect the sound dispersion. 2. Angle adjustment: If needed, adjust the angle of the speaker to optimize the coverage area. Tilting the speaker can help direct the sound towards the desired listening area. 3. Mounting options: Depending on the installation method, you can choose different mounting options to further adjust the coverage area. For example, using a backcan or enclosure can help control the sound dispersion and enhance the speaker's performance. 4. Consider additional speakers: If the coverage area is larger or irregularly shaped, you may need to consider adding additional JBL Control 24CT Micro speakers. This can help ensure even sound distribution throughout the space. 5. Test and fine-tune: After adjusting the speaker's position, angle, and mounting options, test the sound output in the desired listening area. Make any necessary fine-tuning adjustments to achieve the desired coverage and sound quality. By following these steps, you can effectively adjust the coverage area of the JBL Control 24CT Micro speaker to suit your specific needs and optimize the sound distribution in your space.

What should I do if the JBL Control 24CT Micro speaker is distorting the sound?

If the JBL Control 24CT Micro speaker is distorting the sound, you can try the following troubleshooting steps: 1. Check the volume level: Ensure that the volume level is not set too high. Excessively high volume can cause distortion in the speaker's output. Gradually decrease the volume to see if the distortion improves. 2. Adjust the equalizer settings: If your audio source or amplifier has equalizer settings, try adjusting them to optimize the sound output. Reducing the bass or treble levels can help alleviate distortion. 3. Verify the audio source quality: Check the quality of the audio source being played through the speaker. Low-quality or heavily compressed audio files can contribute to distortion. Try playing a different audio source to see if the distortion persists. 4. Inspect the speaker placement: Ensure that the speaker is properly positioned and mounted. Improper placement, such as being too close to walls or corners, can cause sound reflections and contribute to distortion. Adjust the speaker's position to minimize these effects. 5. Contact JBL Professional: If the distortion issue persists after following these steps, it is recommended to contact JBL Professional for further assistance. They can provide additional troubleshooting guidance or arrange for a repair if necessary. By following these steps, you can troubleshoot and address distortion issues with the JBL Control 24CT Micro speaker to improve the sound quality.

How can I troubleshoot issues with the JBL Control 24CT Micro speaker's power capacity?

To troubleshoot issues with the power capacity of the JBL Control 24CT Micro speaker, follow these steps: 1. Check the power source: Ensure that the speaker is connected to a compatible power source. Verify that the power source is providing the correct voltage and current capacity required by the speaker. 2. Verify the transformer taps: If you are using the speaker with a distributed line system, check the transformer taps. Ensure that the selected tap matches the power capacity of the speaker. The Control 24CT Micro has transformer taps for 70V (9W, 4W, 2W, 1W, 0.5W) and 100V (9W, 4W, 2W, 1W). 3. Consider the continuous power rating: The Control 24CT Micro has a power capacity of 15W continuous pink noise and 30W continuous program power. Ensure that the audio source or amplifier is not exceeding these power ratings to prevent potential damage or distortion. 4. Test with a continuous-tone signal: If you suspect power-related issues, you can perform a continuous-tone test. Use a pure sine wave signal swept from 800Hz to 2400Hz over ten seconds with a maximum RMS voltage of 5.3V. Monitor the speaker's performance during the test to identify any anomalies. If the power capacity issues persist or if you have further concerns, it is recommended to contact JBL Professional for additional assistance and guidance.

Is the manual of the JBL Control 24CT Micro available in English?

Yes, the manual of the JBL Control 24CT Micro is available in English .

Is your question not listed? Ask your question here

No results