JBL BassPro HUB
  1. Home
  2. Car Speakers
  3. JBL
  4. BassPro HUB

JBL BassPro HUB manual

(1)
  • THANK YOU FOR YOUR PURCHASE
    ...
    Your
    JBL
    product has been designed
    to
    provide you with
    D the performance and ease
    of
    operation you would expect
    from JBL.
    • Please take time
    to
    read your owner's manual
    in
    its
    entirety before operating or installing your subwoofer.
    • Keep the owner,s manual for
    JBL
    BassPro Hub
    in
    your
    glove compartment along with the owner,s manual for
    your
    car.
    • Put your subwoofer sales receipt with other important
    documents
    in
    order
    to
    expedite warranty service if
    needed.
    ABOUT THE MANUAL
    This manual describes general installation guidelines
    and operation instructions. However, please note that
    proper installation
    of
    mobile audio and video components
    requires qualified experience with mechanical and electrical
    procedures.
    If
    you
    do
    not have the knowledge and tools
    to
    successfully perform this installation, we strongly recommend
    consulting
    an
    authorized
    JBL
    dealer about your installation
    options. Keep
    all
    instructions and sales receipts for
    reference. Consider this manual as
    an
    indispensable feature
    of
    your subwoofer.
    What's
    in
    the box:
    1 x
    JBL
    BassPro Hub
    1 x wiring harness
    1 x vehicle mounting post
    1 x remote controller with 16-2/5"(5m) cable
    1 x Owner's manual
    INSTALLATION
    IMPORTANT:
    Disconnect the vehicle's negative (-) battery
    terminal before beginning the installation.
    NOTE:
    You
    may find it more convenient to make
    all
    of
    the
    connections
    to
    the amplifier base before you permanently
    mount
    it.
    MOUNTING THE BASSPRO HUB
    The BassPro Hub mounts inside the rim
    of
    the spare tire
    in
    your trunk.
    To
    mount the BassPro Hub properly, follow these
    steps:
    1 . Remove the vehicle's spare mounting post.
    2.
    Make sure that the spare tire
    is
    placed
    in
    the trunk with
    the outside
    of
    the tire facing downwards; the back
    of
    the
    rim
    should be facing you. This will ensure sufficient
    mounting depth for the BassPro Hub.
    3.
    Carefully place the BassPro Hub inside the rim
    of
    the
    spare tire.
    4. Insert the BassPro Hub mounting post into the slot
    in
    the
    center
    of
    the BassPro Hub. When it reaches the spare
    tire mounting bracket, begin turning clockwise
    to
    thread
    the post into the bracket and tighten. Some applications
    require the use of the included adapter
    to
    provide a
    threaded slot for the mounting post.
    NOTE:
    To
    keep from damaging the BassPro Hub or the
    spare tire rim,
    do
    not overtighten the mounting post.
    T
    l~
    original
    base
    T
    'il
    Take
    outthe
    BASSPRO HUB INPUT PANEL
    You'll make
    all
    wiring connections at the panel on the right
    side
    of
    the BassPro Hub.
    To
    access the panel, remove
    two
    screws securing the cover on the
    top
    panel
    of
    the BassPro
    Hub, then lift off the cover
    (see
    illustration below).
JBL BassPro HUB

Need help?

Number of questions: 0

Do you have a question about the JBL BassPro HUB or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other JBL BassPro HUB owners to properly answer your question.

About the JBL BassPro HUB

JBL BassPro HUB #1
JBL BassPro HUB #2
JBL BassPro HUB #3
JBL BassPro HUB #4
JBL BassPro HUB #5
JBL BassPro HUB #6
+1

View the manual for the JBL BassPro HUB here, for free. This manual comes under the category Car Speakers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: Engels. Do you have a question about the JBL BassPro HUB or do you need help? Ask your question here

JBL BassPro HUB specifications

General
Brand JBL
Model BassPro HUB
Product Car speaker
Language Engels
Filetype PDF
Subwoofer
Product type Pre-loaded subwoofer
Subwoofer type Active subwoofer
Subwoofer RMS power 200 W
Subwoofer frequency range 30 - 150 Hz
Subwoofer peak power 300 W
Subwoofer impedance 2 Ω
Subwoofer crossover frequencies 50 - 150 Hz
Technical details
Resonance frequency (Fs) 300 Hz
Subwoofer driver cone material Fiberglass
Weight & dimensions
Width 360 mm
Height 360 mm
Depth 165 mm
Packaging content
Cables included -
Quick start guide ✓

Related product manuals

Frequently Asked Questions

Below, you will find the most frequently asked questions about the JBL BassPro HUB.

Is your question not listed? Ask your question here

Manua.ls

Looking for a manual? Manua.ls ensures that you will find the manual you are looking for in no time. Our database contains more than 1 million PDF manuals from more than 10,000 brands. Every day we add the latest manuals so that you will always find the product you are looking for. It's very simple: just type the brand name and the type of product in the search bar and you can instantly view the manual of your choice online for free.

Manua.ls

© Copyright 2021 Manua.ls. All Rights Reserved.

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more