Janome MB-4S manual

Janome MB-4S
7.5 · 1
PDF manual
 · 92 pages
English
manualJanome MB-4S
1

Instruction Book

MB-4S

Manual

View the manual for the Janome MB-4S here, for free. This manual comes under the category sewing machines and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Janome MB-4S or do you need help? Ask your question here

Need help?

Do you have a question about the Janome and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
A
ashleyJanuary 20, 2023

the machine's screen is not showing any of the bottoms. Therefore I can not do anything. Is there a way to either troubleshoot it or to reset it?

Janome MB-4S specifications

Below you will find the product specifications and the manual specifications of the Janome MB-4S.

General
BrandJanome
ModelMB-4S
Productsewing machine
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Janome MB-4S below.

What size needle should I use?

Which size of needle you can best use depends on the thickness of the fabric you use. With a thick fabric you should use a thick needle. The packaging of your needle states for which substances your needle is suitable.

How long does a sewing needle last?

Generally, a sewing needle lasts about 7 to 9 hours.

Why does the needle break while sewing?

There can be several causes for needle breakage: - Not using the right needle for the right fabric - The needle is set too low - The fabric is not properly guided - The bobbin case is not inserted correctly

What should I do if the Janome MB-4S sewing machine does not recognize the selected thread brand and number during the thread selection process?

If the Janome MB-4S sewing machine does not recognize the selected thread brand and number during the thread selection process, follow these steps: 1. Check the brand and number of the thread you have selected on the machine. 2. Ensure that the thread brand and number match the options available on the machine (Janome, Gütermann Sulky, Madeira, Robison-Anton, Mettler, Pearl Yacht). 3. Use the right or left arrow buttons to select the correct brand and number from the available options. 4. Press the ENTER button to register the new setting. 5. If the issue persists, consider resetting the machine to its default settings or formatting the memory as a troubleshooting step. 6. Remember that formatting the memory will erase all stored data, so proceed with caution.

How can I troubleshoot if the thread color code of the selected brand does not display correctly on the Ready to Sew mode display of the Janome MB-4S?

To troubleshoot if the thread color code does not display correctly on the Ready to Sew mode display of the Janome MB-4S sewing machine, follow these steps: 1. Select the color section with the same color as the previously sewn pattern by pressing the circle key next to the next or previous color section icon. 2. Press the circle key next to the manual color assignment icon to change the function assignment to the circle keys. 3. Press the circle key next to the needle bar icon to assign the previously sewn color to the desired needle bar. 4. To stop the machine for re-threading, select the color section where you want to stop by pressing the circle key next to the next or previous color section icon, then press the circle key next to the manual color assignment icon and the stop icon. 5. The machine will stop after finishing the fourth color for changing the threads to the next colors.

Is the manual of the Janome MB-4S available in English?

Yes, the manual of the Janome MB-4S is available in English .

Is your question not listed? Ask your question here

No results