Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Trance Plus needs about 3 hours for up to 10 hours of party time.
When they’re not rocking out, the LED
lights on your speaker let you know
what it’s doing.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one between your device and
the speaker’s Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the speaker has Bluetooth.
2. Turn on the speaker (press and hold the power button for 3 seconds) and look for the front
screen to illuminate with a multicolored light show.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Trance Plus in your device’s Bluetoothlist or click YES.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and Bluetoothwill find each other every time, as long as the speaker is set
to Bluetoothand your device’s Bluetooth is, you know, on.
If you’re connecting to a computer, you may have some extra steps on that end.
You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If prompted,
enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and hold the +
and - buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Trance Plus but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more, the JAM
Trance Plus will automatically shut off to preserve battery power.
Thank you for purchasing
the JAM Trance Plus.
Check out the sections
below for all the
important information
about your new speaker.
Powering
On
Pairing
Mode
Connected Low
Battery
Continued on page 2.
AC adapter not included.
or
3h
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
1. This is the power button
2. Skip back a track
3. Turn the music down
4. Push it to play, push it again to pause
5. Turn the music up
6. Jam on to the next song
7. Control the brightness of your light show
8. Shuffle through 6 different light shows
9. Choose between 7 different light colors
10. Toggle between languages here
11. Here’s where you hook it up old-school
12. See when your speaker is charging
13. The power cord goes here
14. Language selector pin
Bluetooth
®
Devices
JAM Trance Plus
on
>
3s
14
3
5
2
1
4
6
7
8
9
10
11
13
12
View the manual for the Jam Trance Plus HX-P930 here, for free. This manual comes under the category Cradles & Docking Stations and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Jam Trance Plus HX-P930 or do you need help? Ask your question here
Need help?
Do you have a question about the Jam and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Jam owners to provide you with a good answer.
Need help?
Do you have a question about the Jam and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Jam owners to provide you with a good answer.
Number of questions: 0