Jam Classic 2.0 HX-P190 manual

Jam Classic 2.0 HX-P190
8.9 · 1
PDF manual
 · 3 pages
English
manualJam Classic 2.0 HX-P190

HEY THERE!

JUST CHARGE IT

WE’RE HERE TO HELP. CONTACT US!

HX-P190

USER GUIDE AND

WARRANTY INFORMATION

You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P190)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: http://canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Classic 2.0 needs about 2 hours for up to 5 hours of party time.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one
between your device and the speaker’s Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has Bluetooth.
2. Turn on the speaker (press and hold the power button for 3 seconds)
and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Classic 2.0 in your device’s Bluetooth list or click YES.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and Bluetooth will find each other every time, as long as the
speaker is set to Bluetooth and your device’s Bluetooth is, you know, on.
If you’re connecting to a computer, you may have some extra steps on that
end. You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If
prompted, enter “0000” as the code.
To disable pairing of existing device and pair a new device press and hold
the + and - button for 5 seconds to activate pairing mode.
Note: If you turn on your Classic 2.0 but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more,
the JAM Classic 2.0 will automatically shut off to preserve battery power.
Thank you for purchasing
the JAM Classic 2.0.
Check out the sections
below for all the
important information
about your new speaker.
Continued on page 2.
AC adapter not included.
or
2h
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
1. Power button: press and hold for 3 seconds to
power on.
2. Check out how much juice is in the battery
3. Volume down / Previous track
4. Play & pause / Answer & hang up
5. Volume up / Next track
6. Lets you know when Bluetooth is paired
7. Micro USB cord goes here
8. Here’s where you hook it up old-school
3
6
7
8
5
2
1
4
Bluetooth
®
Devices
JAM CLASSIC 2.0
on
>
3s
Bottom:
The LED lights on your speaker let
you know what it’s doing.
Pairing Mode
Bluetooth Light Battery Light
Connected
Charging
Ready to Party
Aux-In Mode
Low Battery

View the manual for the Jam Classic 2.0 HX-P190 here, for free. This manual comes under the category Cradles & Docking Stations and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Jam Classic 2.0 HX-P190 or do you need help? Ask your question here

Need help?

Do you have a question about the Jam and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Jam owners to provide you with a good answer.

Sean • 21-12-2016No comments

Lights turn on and charges fine but will not pair or show up on any device. I have used many other devices to see if the problem was the speaker. Is there a way to fix this, thank you. Sean Gelvin

Answer this question
Darryl B Mclaughlin • 13-11-2022No comments

How to keep the device on

Answer this question
Robert Nolan • 24-9-2021No comments

Where can I get a replacement charging port for the Model HX-P190 speaker?

Answer this question
Mike Loomis • 30-8-2021No comments

Won't take a charge

Answer this question
Randy • 20-1-2021No comments

How do i seat up my 190 speaker step by step and can i only hook up one

Answer this question

Number of questions: 5

General
Jam
Classic 2.0 HX-P190 | HX-P190RD-EU
Cradle / docking station
31262071248, 31262071255, 31262071262, 0031262071262
English
User manual (PDF)
Loudspeakers
Audio output channels- channels
Number of speakers1
Number of drivers1
Audio
RMS rated power- W
Ports & interfaces
Connectivity technologyWired & Wireless
USB 2.0 ports quantity1
AUX in
Bluetooth range9 m
USB connector typeMicro-USB B
USB connectivity
Bluetooth
3.5 mm connector
Design
Product typeMono portable speaker
Product designOther
Product colourRed
Volume controlDigital
LED indicators
Weight & dimensions
Width76 mm
Depth76 mm
Height66 mm
Weight- g
Performance
Recommended usageMobile phone / Smartphone
Remotely operated
Packaging content
Quick start guide
Cables includedUSB
Quantity per pack1 pc(s)
Power
Power source typeBattery
Battery typeBuilt-in
Battery recharge time2 h
USB charging
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Jam Classic 2.0 HX-P190 below.

Is your question not listed? Ask your question here

No results