View the manual for the Irradio RC 186P here, for free. This manual comes under the category radios and has been rated by 4 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Irradio RC 186P or do you need help? Ask your question here

Below you will find the product specifications and the manual specifications of the Irradio RC 186P.

| Brand | Irradio |
| Model | RC 186P | 214600030 |
| Product | radio |
| EAN | 8006012218657 |
| Language | English |
| Filetype | User manual (PDF) |
| Radio type | Clock |
| Tuner type | Digital |
| Supported radio bands | AM, FM |
| PLL synthesizer | - |
| RMS rated power | - W |
| Built-in speaker(s) | Yes |
| Number of built-in speakers | 1 |
| Built-in display | Yes |
| Display type | LCD |
| Backlight color | Blue |
| Backlight | Yes |
| Headphone outputs | - |
| MP3 playback | No |
| Product color | Black, Silver |
| Projection function | Time |
| Apple docking compatibility | Not supported |
| Projection surface | Ceiling, Wall |
| Projection angle | 180 ° |
| Auto power off | Yes |
| Input voltage | 230 V |
| Alarm clock | Yes |
| Sleep timer | Yes |
| Snooze function | Yes |
| Width | 105 mm |
| Depth | 92 mm |
| Height | 105 mm |
| Weight | 530 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Irradio RC 186P below.
The Irradio RC 186P has a weight of 530 g.
FM stands for Frequency Modulation and AM stands for Amplitude Modulation. The biggest difference between FM radio stations compared to AM radio stations is the sound quality.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
The Irradio RC 186P has a height of 105 mm.
The Irradio RC 186P has a width of 105 mm.
The Irradio RC 186P has a depth of 92 mm.
Yes, Irradio RC 186P is a clock radio. This means that it not only functions as a radio, but also has a built-in clock and alarm clock features.
Yes, Irradio RC 186P has a digital tuner. This allows for precise and accurate tuning to your favorite radio stations.
Yes, Irradio RC 186P can receive both AM and FM radio bands. This gives the user a wide range of radio stations to choose from.
Yes, Irradio RC 186P has a built-in speaker. This means that you can listen to your favorite radio stations directly from the radio without the need for external speakers.
Yes, Irradio RC 186P has a built-in LCD display with backlight. This means that the display is easy to read, even in low light conditions.
To troubleshoot if the time is not displaying correctly on the Irradio RC 186P radio, follow these steps: 1. Check the power supply: Ensure that the radio is properly connected to a power outlet. If the power supply is interrupted and restored, the clock display may blink. Reset both the correct time and alarm time for proper operation. 2. Set the correct time: When the radio is in STANDBY mode, press the TIME SET button (14) to enter the clock setting. Press and hold the TIME SET button (14), then use the MIN/AL set (13) or HR/DISPLAY set (15) to adjust the clock display to the correct time. Release the MIN/AL set (13) and HR/DISPLAY set (15) when finished. 3. Check the battery backup: The radio has a backup power system to maintain the current time and alarm program during a power failure. Ensure that the 9-volt battery is inserted correctly in the battery compartment. 4. Reset the radio: If the radio freezes unexpectedly, use a paper clip to press the RESET button (16) to reset the radio. By following these troubleshooting steps, you should be able to resolve any issues with the time display on the Irradio RC 186P radio.
To troubleshoot if the alarm time is not setting properly on the Irradio RC 186P radio, follow these steps: 1. Ensure the radio is in STANDBY mode. 2. Press the AL1 SET (11) or AL2 SET (12) button to enter the alarm time setting. 3. Use the MIN/AL set (13) or HR/DISPLAY set (15) to adjust the alarm time. 4. Release the MIN/AL set (13) and HR/DISPLAY set (15) when finished setting the alarm time. 5. After setting the AL1 or AL2 alarm, the display will show the respective alarm setting time. 6. To wake up to music, press the AL1 button (3) or AL2 button (4) until the music icon is displayed. The radio will turn on and the music icon will blink at the set alarm time. 7. To wake up to the buzzer alarm, set the alarm time and press the AL1 button (3) or AL2 button (4) until the alarm icon is displayed. The alarm will ring at the set alarm time, and the alarm icon will blink. By following these steps, you should be able to properly set the alarm time on the Irradio RC 186P radio.
To troubleshoot if the projector feature is not working on the Irradio RC 186P radio, follow these steps: 1. Ensure that the radio is in STANDBY mode. 2. Press the PROJECTION ON/OFF button (7) to turn on the projection light. 3. If the projection display is not visible or clear, check the position of the radio and adjust the angle of the projection light. 4. Press the REVERSE PROJECTION button (6) to change the display format if needed. 5. If the projection feature is still not working, check the power supply. Make sure the radio is properly connected to a power outlet. 6. If the power supply is interrupted and restored, the clock display may blink. Reset both the correct time and alarm time for proper operation. 7. If the issue persists, try resetting the radio. Use a paper clip to press the RESET button (16) to reset the radio. 8. If none of the above steps resolve the issue, refer to the user manual for further troubleshooting or contact customer support for assistance. By following these steps, you should be able to troubleshoot and resolve any issues with the projector feature on the Irradio RC 186P radio.
To troubleshoot if you are unable to tune in to any radio stations on the Irradio RC 186P radio, follow these steps: 1. Ensure that the radio is in STANDBY mode. 2. Press the POWER button (10) to switch on the radio. 3. Press the BAND button (9) to select the desired band (AM or FM). 4. Adjust the TUNING knob (19) to search for radio stations. Rotate the knob slowly to allow the radio to scan and lock onto available stations. 5. If you are still unable to tune in to any stations, check the antenna connection. Ensure that the antenna is properly connected to the radio and positioned for optimal reception. 6. If you are indoors, try repositioning the radio or antenna near a window or in a location with better reception. 7. If you are using the radio in a remote area or a location with weak signal strength, consider using an external antenna for improved reception. 8. If the issue persists, try resetting the radio. Use a paper clip to press the RESET button (16) to reset the radio. 9. If none of the above steps resolve the issue, refer to the user manual for further troubleshooting or contact customer support for assistance. By following these steps, you should be able to troubleshoot and resolve any issues with tuning in to radio stations on the Irradio RC 186P radio.
To troubleshoot if the sleep or wake to music function is not working on the Irradio RC 186P radio, follow these steps: 1. Ensure that the radio is in STANDBY mode. 2. Press the SLEEP button (8) to set the desired period of radio playing before sleep. Use the HR/DISPLAY (15) or MIN/AL (13) buttons to adjust the sleep time. 3. The radio will automatically stop playing after the set sleep time. 4. To wake up to music, set the alarm time using the AL1 (11) or AL2 (12) buttons. Press the AL1 (3) or AL2 (4) button until the music icon is displayed. The radio will turn on and play music at the set alarm time. 5. To wake up to the buzzer alarm, set the alarm time and press the AL1 (3) or AL2 (4) button until the alarm icon is displayed. The alarm will ring at the set alarm time. If the sleep or wake to music function is still not working, try resetting the radio by pressing the RESET button (16) with a paper clip. If the issue persists, refer to the user manual for further troubleshooting or contact customer support for assistance.
Yes, the manual of the Irradio RC 186P is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Irradio and is the answer not in the manual?
Question and answer
Number of questions: 0