View the manual for the iRobot Roomba 630 here, for free. This manual comes under the category Robot Vacuum Cleaners and has been rated by 10 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the iRobot Roomba 630 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the iRobot Roomba 630.
Brand | iRobot |
Model | Roomba 630 |
Product | Robot Vacuum Cleaner |
EAN | 0885155003560, 5060155406947, 0885155003485, 5060155407029 |
Language | English |
Filetype |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the iRobot Roomba 630 below.
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the iRobot and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Samsung Galaxy A7 owners to provide you with a good answer.
My Roomba 630 won't charge
I lost my instructions' book and I would like to know how to change the programming of my "iRobot Roomba 630". Thank you for answering :-)
My Roomba #630 only runs about 30 minutes now, does not talk anymore and will not dock itself. Can you help me?
How or can I program my room a and how?
Does not seem to be sucking as well as it did, there are lines on either side of it as it moves along the carpet, like dust lines. E..Rush
Can you purchase replacement side brushes
My IRobot Roomba 630 only spins in circle and I want it to move in straight line again. What to do? Please help
How do you change the language on the roomba? It’s in Chinese and I need it to be in English
My Roomba is coming with code 3 I’m trying to reset and have much it has a new battery
I noticed during last use that the side brush of my Roomba 630 was not rotating. There was some buildup of fluff around it and it was stiff to turn by hand. I tried to clean it by removing the central screw, but found the brush hard to remove from its blue plastic socket. I didn't want to force it. I replaced it as it was and used the machine again. The side brush did an occasional single revolution but didn't spin like it usually did. Any suggestions and warnings about how to get the side brush out without damage? Do I try to remove the yellow central part with the three brushes and leave the blue surround in place, or do I try to remove the whole fitting - blue plastic socket + yellow hub and brushes? Thanks.
Number of questions: 10