ION EZ Vinyl/Tape Converter manual

ION EZ Vinyl/Tape Converter
9 · 6
PDF manual
 · 44 pages
English
manualION EZ Vinyl/Tape Converter
12

PROBLEMA CAUSA SOLUCIÓN

No puedo oír mis
grabaciones una vez que
la transferí e intenté
reproducirlas en mi
computadora.
Mientras el dispositivo
USB está conectado, no
puedo escuchar ninguna
música desde mi
computadora.
Salida de audio de la
computadora configurada
incorrectamente.
Asegúrese de que la tarjeta de sonido de la computadora esté seleccionada como
dispositivos de reproducción.
Windows XP: Haga clic en el menú Start Control Panel (Inicio > Panel de
control ) (o Settings Control Panel (Configuración > Panel de control) en la vista
clásica) Sound and Audio Devices (Dispositivos de sonido y audio). Haga clic
en la pestaña Audio y bajo Sound playback (Reproducción de sonido), seleccione
la tarjeta de sonido de su computadora como dispositivo predeterminado.
Windows Vista: Haga clic en el menú Start Control Panel (Inicio > Panel de
control) (o Settings Control Panel (Configuración > Panel de control ) en la vista
clásica) Hardware and Sound Sound (Hardware y sonido > Sonido). Haga
clic en la pestaña Playback (Reproducción y seleccione la tarjeta de sonido de su
computadora como dispositivo predeterminado.
Windows 7: Haga clic en el meStart Control Panel Sound (Inicio > Panel
de control > Sonido). Haga clic en la pestaña Playback (Reproducción) y
seleccione la tarjeta de sonido de su computadora como dispositivo
predeterminado.
Mac: Haga clic en el icono superior izquierdo de la "manzana" y luego en System
Preferences Sound (Preferencias del sistema > Sonido). Haga clic en la
pestaña Output (Salida). En el menú, seleccione Internal Speakers (Altavoces
internos) si va a usar los altavoces internos de la computadora o Headphones
(Auriculares) si va a usar altavoces o auriculares conectados a la salida para
auriculares de 1/8" de la computadora.
En Windows Vista o
Windows 7, mis
grabaciones son mono en
lugar de estéreo.
Propiedades de entrada de
grabación no configuradas a
"stereo" (estéreo).
Es posible que sea necesario especificar manualmente "stereo" para la entrada de
grabación.
Vaya a Start Control Panel Sound (Inicio Panel de Control Sonido)
en la vista clásica). Luego, haga clic en la pestaña Recording (Grabación) y resalte
la entrada Microphone (USB Audio Codec). Haga clic en Properties (Propiedades)
para activar la configuración de la entrada. Luego, haga clic en la pestaña
Advanced (Avanzadas) y seleccione "2 channel, 16 bit, 44100 Hz (CD quality)" (2
canales, 16 bits, 44100 Hz (calidad de CD)) en el menú desplegable Default Format
(Formato por defecto). Finalmente, haga clic en Apply (Aplicar) para aceptar los
valores de configuración.
En mi Mac, después de
grabar un archivo,
aparece como "EZACT
Temp" en iTunes y no se
reproduce.
Es necesario ajustar los
parámetros de iTunes.
En iTunes, haga clic en el menú iTunes de la parte superior izquierda y luego en
Preferences (Preferencias). Haga clic en la pestaña General y luego en el botón
Import Settings (Importar parámetros) y ajuste Import Using (Importar usando)
como MP3 Encoder (Codificador MP3). Luego, haga clic en la pestaña Playback
(Reproducción) y deseleccione Sound Check (Verificación de sonido) Sound
Enhancer (Mejorador de sonido) y Crossfade Songs (Crossfader de temas).
Cierre la ventana cuando termine.
El sonido de las salidas
de audio de mi dispositivo
USB está distorsionado o
lleno de estática.
El conmutador de nivel de
línea/fonográfico puede no
estar colocado
correctamente.
Giradiscos únicamente: Si su dispositivo USB cuenta con un conmutador de nivel
de línea/fonográfico en su panel trasero, asegúrese de que esté colocado en el
nivel apropiado para las entradas a las que está conectado ("de línea" o
"fonográficas"). Si su dispositivo USB no tiene este conmutador, consulte la Guía
de inicio rápido provista con el producto para determinar si es de nivel de línea o
fonográfico.
Nota: No es necesario que conecte su dispositivo USB a un sistema de altavoces,
receptor, etc. para que EZ Vinyl/Tape Converter convierta su música. Sólo es
necesario que lo conecte a su computadora (mediante un cable USB).

PREGUNTAS FRECUENTES

Pregunta: ¿Con qué sistemas operativos es compatible EZ Vinyl/Tape Converter?

Respuesta: Actualmente, EZ Vinyl/Tape Converter es compatible con los sistemas operativos Windows XP, Vista y 7 (de 32 ó

64 bits), como también con el sistema operativos Mac OS X 10.4.11 (o superior).

Pregunta: ¿A qué formato digital se convierten mis grabaciones?

Respuesta: Las grabaciones se convierten en archivos MP3 a la velocidad de bits que esté seleccionada en Import Settings
(Configuración de importación) de su iTunes. Para ver o cambiar esta configuración, en iTunes, haga clic en el menú Edit
(Editar), seleccione Preferences (Preferencias), seleccione la pestaña General y haga clic en el botón Import Settings. Haga
clic en el menú desplegable Import Using (Importar usando) y seleccione MP3 Encoder (Codificador MP3). De esta forma
podrá seleccionar la velocidad de bits deseada en el menú desplegable Setting (Ajustes) que está debajo del mismo.

Pregunta: ¿Dónde se almacenan mis grabaciones en la computadora?

Respuesta: Sus grabaciones se almacenan en la carpeta iTunes Music (Música de iTunes). Por defecto, esta carpeta se
encuentra en My Documents My Music iTunes iTunes Music (Mis documentos Mi música iTunes Música de
iTunes) en el sistema operativo Windows o en Music iTunes iTunes Music en el sistema operativo Mac, y el contenido

se organiza por nombre de artista.

Pregunta: ¿Cómo quemo mis grabaciones en un CD?

Respuesta: Hay varias maneras diferentes de quemar su grabación en un CD. Puede usar ya sea iTunes u otra aplicación de
grabación de CD. Para quemar CD usando iTunes, cree una nueva Playlist (Lista de reproducción) y luego arrastre los temas
de su biblioteca normal a esta lista de reproducción. Cuando haya agregado todas las pistas deseadas, haga clic en esa lista
de reproducción y luego en el botón Burn Disc (Quemar disco).Para más información consulte el menú Help (Ayuda) de

iTunes o su aplicación de alternativa.

Pregunta: ¿Puedo escuchar mi música por la computadora mientras grabo?

Respuesta: Sí, EZ Vinyl/Tape Converter monitorea automáticamente el audio entrante a través de la computadora a medida
que se transfiere su música. Si está usando varios dispositivos de audio, recomendamos que desactive los que no desea usar

para el monitoreo. Para la mayoría de los usuarios, sin embargo, éste no es un problema.

Manual

View the manual for the ION EZ Vinyl/Tape Converter here, for free. This manual comes under the category hi-fi systems and has been rated by 6 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the ION EZ Vinyl/Tape Converter or do you need help? Ask your question here

Need help?

Do you have a question about the ION and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 6
B
Bev brooksMarch 3, 2023

If it only works with ION tape decks, why doesn't it say that on the box? I can't use it.

T
Teri Poole Poole July 10, 2024

I have EZ VINYL CONVERTER, What type of needle does it take?

P
Pedro AlvarezDecember 25, 2022

I have an issue with my Ion turntable. The record plays but the volume is very low. You can hardly hear it even with volume all the way up. Through built in speakers and Bluetooth sorakers

S
Sharyn PittMay 4, 2023

first time using new ion premier. It appears the usb cable will not insert completely into back of turntable. Also when recording the green bar on the right barely registers, clicked off track separation, didn't help. Gain indicator only moves left green bar.

G
George W. Mays JrMarch 26, 2024

If I accidentally click on BACK are all my recorded songs in that session non-recoverable?

A
AndrewMarch 4, 2023

how to store recording direct to mp3, not to iTunes or Music app?

ION EZ Vinyl/Tape Converter specifications

Below you will find the product specifications and the manual specifications of the ION EZ Vinyl/Tape Converter.

The ION EZ Vinyl/Tape Converter is a hi-fi system that allows users to convert their vinyl records and cassette tapes into digital audio files. The system is designed to provide a simple and user-friendly experience, making it easy for individuals to preserve and enjoy their music collection in a modern format. With the ION EZ Vinyl/Tape Converter, users can connect their turntable or cassette player to the system and begin the conversion process. The system supports both 33 1/3 and 45 RPM records, allowing for versatile playback options. The converter features built-in software that enables users to easily transfer their music to a computer or portable device. The included software also offers functions for editing and enhancing the audio files, such as removing clicks and pops from vinyl records or reducing tape hiss from cassette tapes. Equipped with RCA and headphone outputs, the ION EZ Vinyl/Tape Converter allows users to connect external speakers or headphones for enhanced listening experiences. Additionally, the system includes a USB port for convenient connectivity to computers and other devices. The ION EZ Vinyl/Tape Converter is designed with durability and reliability in mind, utilizing high-quality materials to ensure long-lasting performance. Its sleek and compact design makes it easy to integrate into any home audio setup. Overall, the ION EZ Vinyl/Tape Converter provides a convenient and efficient solution for digitizing and preserving vinyl records and cassette tapes. Its straightforward and reliable performance makes it a suitable choice for music enthusiasts looking to enjoy their collection in a modern format.

General
BrandION
ModelEZ Vinyl/Tape Converter
Producthi-fi system
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the ION EZ Vinyl/Tape Converter below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my hi-fi system?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect the ION EZ Vinyl/Tape Converter to my computer?

To connect the ION EZ Vinyl/Tape Converter to your computer, you will need to utilize the included USB cable. Simply plug one end of the USB cable into the converter, and the other end into an available USB port on your computer.

How do I properly calibrate the recording level on the EZ Vinyl/Tape Converter?

To calibrate the recording level on the EZ Vinyl/Tape Converter, start by playing the audio source through your hi-fi system. Adjust the input gain dial located on the front panel of the converter until the recording meter on the software interface peaks around 0 dB, indicating optimal recording level.

Can I convert tapes and vinyl records simultaneously using the ION EZ Vinyl/Tape Converter?

No, the ION EZ Vinyl/Tape Converter is designed to convert either tapes or vinyl records at a time. You will need to select the appropriate source in the software interface and connect either your tape deck or turntable to the converter accordingly.

How do I convert my vinyl records to digital files using the ION EZ Vinyl/Tape Converter?

Start by ensuring the turntable is properly connected to the converter. Open the software interface on your computer and select the vinyl record option. Place your record on the turntable and gently drop the needle onto the record. Click the "Record" button on the software interface to initiate the conversion process.

What should I do if the audio quality of my converted files is poor or distorted?

If you are experiencing poor or distorted audio quality, first ensure that your audio source (vinyl record or tape) is in good condition and clean. Check if any dust or debris may be affecting playback. Additionally, make sure the recording level is properly calibrated and adjust as necessary. If issues persist, try using a different USB port on your computer or reinstalling the software.

Is the manual of the ION EZ Vinyl/Tape Converter available in English?

Yes, the manual of the ION EZ Vinyl/Tape Converter is available in English .

Is your question not listed? Ask your question here

No results