These diagrams and assembly instructions illustrate
the most common way to arrange the DRUM
ROCKER, but you may adjust it to your own
preferences. For instance, you may:
¾Select different color combinations for the cymbal
rings (e.g. yellow and blue instead of yellow and
green). Remember to match the color of the
cymbal ring to the color of the jack on the module.
¾Place the module underneath the drum pads
(rather than above) on the rack.
¾Switch the ends of the metal rods under the drum
pads so the longer end is protruding outward (to
allow for more flexibility in positioning the drum
pads).
Use the zipties (included) to secure excess cable
length to the rack once you have arranged everything
to your satisfaction.
If you are playing on a hardwood floor, make sure the
screws at the corners of the pedal are retracted so they
do not damage the floor. If you are playing on a
carpeted floor, you may attach the velcro strips
(included) and use the screws to secure the pedal to
the carpet.
ESPAÑOL
CONSEJOS
Estos diagramas e instrucciones de montaje ilustran la
forma más común de disponer el DRUM ROCKER, pero
puede ajustarlos según sus propias preferencias. Por
ejemplo, puede hacer lo siguiente:
¾Seleccionar diferentes combinaciones de colores para
los aros de los platillos (por ej. amarillo y azul en lugar
de amarillo y verde). Recuerde hacer coincidir el color
del aro del platillo con el del conector del módulo.
¾Coloque el módulo debajo de los pads de batería (y no
arriba) en el bastidor.
¾Cambie los extremos de las varillas de metal con forma
de L debajo de los pads de batería, de modo que el
extremo más corto se conecte al pad (para permitir
mayor flexibilidad en el posicionamiento de los pads).
Use los precintos tipo zip (incluidos) para sujetar el exceso
de cable al bastidor una vez que haya dispuesto todo a su
satisfacción.
Si va a tocar sobre un piso de madera dura, asegúrese de
que los tornillos de las esquinas del pedal estén retraidos y
no dañen el piso. Si va a tocar sobre un piso alfombrado,
puede fijar las tiras de velcro (incluidas) y usar los tornillos
para fijar el pedal a la alfombra.
FRANÇAIS
CONSEILS
Ces diagrammes et instructions pour l'assemblage
illustrent la configuration la plus fréquemment utilisée
pour le DRUM ROCKER, mais vous pouvez l’ajuster
selon vos préférences. Par exemple, vous pouvez :
¾Sélectionner des combinaisons de couleurs
différentes pour les anneaux des cymbales (jaune
et bleu au lieu de jaune et vert). Rappelez-vous
qu’il faut utiliser la même couleur d’anneau de
cymbale que celle de la prise du module.
¾Placez le module sous les pads (plutôt qu’au-
dessus) du support.
¾Assurez-vous que l’extrémité courte des tiges de
métal en L sous les pads est connectée aux pads
(afin de permettre plus de flexibilité dans le
positionnement des pads).
Utilisez les attaches (incluses) afin de bien fixer le
surplus de câble du support une fois que vous serrez
satisfait du montage.
Si vous jouez sur un plancher de bois franc, assurez-
vous que les vis de coin des pédales sont rétractées
afin qu'elles n'endommagent pas le plancher. Si vous
jouez sur du tapis, utilisez les attaches de velcro
(incluses) et les vis pour fixer la pédale au tapis.
DEUTSCH
TIPPS
Diese Schaubilder und Bauanleitungen zeigen die
gebräuchlichste Weise, den DRUM ROCKER
zusammenzusetzen, dies kann aber gemäß den
persönlichen Vorlieben angepasst werden. Man kann, z. B.:
¾Andere Farbkombinationen für die Beckenringe
verwenden (z. B. gelb und blau anstelle von gelb und
grün). Dabei sollte nicht vergessen werden, die Farbe
des Beckenrings mit der des Anschlusses am Modul
abzustimmen.
¾Modul unter den Schlagzeug-Pads (anstatt darüber) im
Rack einbauen.
¾Die L-förmigen Metallstäbe unter den Schlagzeug-Pads
umdrehen, so dass das kürzere Ende mit dem Pad
verbunden ist (dies ermöglicht mehr Flexibilität beim
Positionieren der Schlagzeug-Pads).
Kabelbinder (beiliegend) verwenden, um überlange Kabel
zum Rack zu sichern, sobald alles wunschgemäß aufgebaut
und installiert ist.
Falls auf einem Parkettboden gespielt wird, sicherstellen,
dass die Schrauben an den Ecken des Pedals nicht
herausstehen und den Boden beschädigen. Wird auf einem
Teppichboden gespielt, können die Velcro-Streifen
(beiliegend) und die Schrauben verwendet werden, um das
Pedal fest mit dem Teppich zu verbinden.
ITALIANO
SUGGERIMENTI
Questi diagrammi e istruzioni di montaggio illustrano il modo
più comune di sistemare il DRUM ROCKER, ma è possibile
regolarlo in base alle proprie preferenze. Ad esempio, è
possibile:
¾Selezionare diverse combinazioni di colore per gli anelli
dei piatti (ad esempio giallo e blu anziché giallo e
verde). Ricordarsi di abbinare il colore dell’nello del
piatto a quello del jack sul modulo.
¾Collocare il modulo sotto ai pad (anziché sopra) sul
rack.
¾Invertire i capi dell’asta metallica a L sotto ai pad in
modo che il capo più corto sia collegato al pad (per una
maggiore flessibilità nel posizionamento dei pad).
Servirsi dei fermi (in dotazione) per fissare il cavo in
eccesso al rack una volta sistemato tutto come desiderato.
Se si suona su un pavimento in parquet, assicurarsi che le
viti agli angoli del pedale siano retratte in modo che non
danneggino il pavimento. Se si suona su un pavimento con
moquette o tappeti si possono attaccare delle strisce di
velcro (in dotazione) e servirsi delle viti per fissare il pedale
alla moquette o al tappeto stesso.
NEDERLANDS
TIPS
Deze diagrammen en montage-instructies geven de meest
voorkomende manier voor plaatsing van de DRUM
ROCKER aan; u kunt deze aanpassen naar uw eigen
voorkeuren. U kunt bijvoorbeeld:
¾verschillende kleurencombinaties voor de
cimbaalringen selecteren (bijv. geel en blauw i.p.v. geel
en groen). Vergeet niet de kleur van de cimbaalring
overeen te laten komen met de kleur van het
contactpunt op de module.
¾Plaats de module onder de drumpads (beter dan
erboven) in het rek.
¾Draai de uiteinden van de L-vormige metalen stangen
onder de drumpads zodat het korte uiteinde
aangesloten is op de pad (om zo meer flexibel te zijn in
de positionering van de drumpads).
Gebruik de tie-raps (meegeleverd) om losse bekabeling aan
het rek te bevestigen nadat alles naar wens is opgesteld.
Als u op een hardhouten vloer speelt, zorg er dan voor dat
de schroeven op de hoeken van het pedaal ingeschoven
zijn zodat de vloer niet beschadigd wordt. Als u op een vloer
met tapijt speelt, kunt u de (meegeleverde) klittenbandstrips
bevestigen en de schroeven gebruiken om het pedaal aan
het tapijt te bevestigen.
(2)
(2)
(1)
(2)
(1)
(1)
(2) (4)
(1) (1)
(2)
(7)
(3)
(1)
MANUAL VERSION 1.0
Manual
View the manual for the ION Drum Rocker here, for free. This manual comes under the category hi-fi systems and has been rated by 2 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the ION Drum Rocker or do you need help? Ask your question here
Need help?
Do you have a question about the ION and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 0
ION Drum Rocker specifications
Below you will find the product specifications and the manual specifications of the ION Drum Rocker.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the ION Drum Rocker below.
When is my volume too loud?
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Can bluetooth devices of different brands be connected to each other?
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
What is bluetooth?
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
How can I best clean my hi-fi system?
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Wat is Dolby Atmos?
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
Is the manual of the ION Drum Rocker available in English?
Yes, the manual of the ION Drum Rocker is available in English .
Need help?
Do you have a question about the ION and is the answer not in the manual?
Question and answer
Number of questions: 0