Intex PureSpa manual
254A(254IO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 11/28/2014EnglishOWNER’S MANUALPureSpa™SSP-H-20-1IMPORTANTSAFETY RULESRead, understand, and followall instructions carefully beforeinstalling and using this product.254-*A*-R1-1511Do not forget to try these other ne Intex products: pools, poolaccessories, in-home toys, airbeds and boats available at neretailers or visit our website.Due to a policy of continuous product improvement, Intex reservesthe right to change specications and appearance, which mayresult in updates to the instruction manual without notice.For illustrative purposes only.©2014 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.- Intex Recreation Corp.All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechtevorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt inLizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & IntexRecreation Corp., P.O. Box 1440, Long Beach, CA 90801• Distributed in the European Union by/Distribué dans l’Union Européennepar/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RRRoosendaal – The Netherlandswww.intexcorp.com
Need help?
Number of questions: 28Do you have a question about the Intex PureSpa or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Intex PureSpa owners to properly answer your question.
can I buy replacement pump
What do I need to do if I get a “heat sensor error”
I am getting a Heat Sensor error
Error 81 what does this mean
how to replace pump and impeller
What is e90 mean when it pops up on the screen
Why am I getting E90 error, checked filter and ok
hello could you tell me where does the filter go top or bottom off the tub
Bottom... both go on the 2 bottom slots 45% apart from each other.
How to isn't the temp to be lower if not using it for a few day
I can't keep air in my hot tub, (I disassembled it for the winter and am trying to put it up again) after I fill it with air and disconnect the hose the air keeps pouring out of the valve no matter how firmly I try to screw on the cap. Is there some way to fix this?
Iam after a replacement intex air pressure release valve
my pure spa 28429 E motor is suddenly turning off when water temp reaches 90-91. Temp is set at 100. I have tried all of the suggestions in the manual.
The heat flame light is green and not heating up
If the filler is plugged doesn’t the pump shut down?
About the Intex PureSpa
View the manual for the Intex PureSpa here, for free. This manual comes under the category Not categorized and has been rated by 6 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Intex PureSpa or do you need help? Ask your question here
Intex PureSpa specifications
General
| Brand | Intex |
| Model | PureSpa |
| Product | Not categorized |
| Language | English |
| Filetype |
Features
| Inflatable | ✓ |
| Capacity | 795 L |
| Material | PVC |
| Recommended age (min) | 6 yr(s) |
| Temperature (min) | 20 °C |
| Temperature (max) | 40 °C |
| Flow rate | 1.741 l/h |
| Number of persons | 4 person(s) |
| Shape | Round |
| Massage type | Bubble massage |
| Foldable | ✓ |
| Temperature rise (min) | 1.5 °C/h |
| Temperature rise (max) | 2.5 °C/h |
| Built-in water softener | ✓ |
| Product colour | Beige,Khaki |
| Number of jets | 120 |
| Built-in display | ✓ |
| Display technology | LED |
Weight & dimensions
| Height | 710 mm |
| Inner diameter | 1450 mm |
| Outer diameter | 1960 mm |
Packaging data
| Package width | 508 mm |
| Package depth | 787.4 mm |
| Package height | 555.6 mm |
| Package weight | 49300 g |
Packaging content
| Ground cloth | ✓ |
| Cover | ✓ |
| Chlorine dispenser | ✓ |
| Cover type | Cloth cover |
| Carrying case | ✓ |
Power
| Heater power | 2200 W |
| Blower power | 800 W |
| Water softener power | 10 W |
| AC input voltage | 220-240 V |
Filtering
| Filtering | ✓ |
What is error code 90, and 87?
I KEEP GETTING A E 90 CODE
How do I fix the pump with the E90 code
How to fix e90