Intenso PM5200 manual

Intenso PM5200
9.8 · 1
PDF manual
 · 67 pages
English
manualIntenso PM5200
POWERBANK
PM5200
User Manual
Version 1.0
for everyday life

View the manual for the Intenso PM5200 here, for free. This manual comes under the category power banks and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Intenso PM5200 or do you need help? Ask your question here

Need help?

Do you have a question about the Intenso and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandIntenso
ModelPM5200 | 7323524
Productpower bank
EAN4034303024896, 4034303024803, 4034303024810
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Performance
Battery capacity5200 mAh
Battery technologyLithium-Ion (Li-Ion)
Charging sourceUSB
Number of charging cycles-
Fast chargingNo
Design
Number of simultaneously connected devices (max)1
Product colorGray
Housing material-
Charger compatibilityUniversal
LED indicatorsYes
Weight & dimensions
Width25 mm
Depth42.5 mm
Height95.5 mm
Weight136 g
Power
Input voltage5 V
Input current1 A
Output voltage5 V
Output current1 A
Ports & interfaces
Input interfaceMicro-USB
USB charging connectorYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Intenso PM5200 below.

What is the weight of the Intenso PM5200?

The Intenso PM5200 has a weight of 136 g.

What is the height of the Intenso PM5200?

The Intenso PM5200 has a height of 95.5 mm.

What is the width of the Intenso PM5200?

The Intenso PM5200 has a width of 25 mm.

What is the depth of the Intenso PM5200?

The Intenso PM5200 has a depth of 42.5 mm.

Does Intenso PM5200 have a fast charging feature?

No, Intenso PM5200 does not have fast charging. This means that the charging time may be longer compared to power banks with fast charging capabilities.

How many devices can be simultaneously connected to Intenso PM5200?

Only 1 device can be connected at a time to Intenso PM5200. This may be a limitation for users who need to charge multiple devices simultaneously.

What is the battery capacity of Intenso PM5200?

The battery capacity of Intenso PM5200 is 5200 mAh. This is a moderate capacity suitable for charging smartphones and other small devices.

What type of charging connector does Intenso PM5200 have?

Intenso PM5200 has a USB charging connector. This makes it compatible with a wide range of devices that can be charged via USB.

Are there LED indicators on Intenso PM5200?

Yes, Intenso PM5200 features LED indicators to show the remaining battery level. This allows users to easily determine when the power bank needs to be recharged.

What should I do if the power bank is not charging my devices despite being connected properly?

1. Check the LED status lights to see the remaining energy of the Powerbank. Make sure the Powerbank is not fully charged or in standby mode. 2. Ensure that the device you are trying to charge is properly connected to the Powerbank via the USB cable. Use the USB A port (OUT) on the Powerbank and the appropriate input on your device. 3. Press the function key on the Powerbank to start the charging process. If the last status LED is blinking, it indicates low Powerbank capacity, and you should recharge it. 4. Note that about 30% of the Powerbank's total capacity is used up during the charging process. This is normal due to power loss from circuit warmth and voltage conversion. 5. For optimal performance, regularly use and fully charge the Powerbank at least every three months. Ensure proper heat dissipation by placing the Powerbank on a firm and heat-resistant surface while in use.

How can I ensure that the internal battery of the power bank is functioning correctly and providing the expected capacity?

To ensure that the internal battery of your Intenso PM5200 power bank is functioning correctly and providing the expected capacity, follow these steps: 1. Press the function key to check the current battery status displayed by the LED lights. 2. Use the LED status display to monitor the remaining energy of the power bank. 3. Charge the power bank using the supplied microUSB cable and monitor the charging process through the LED status lights. 4. Connect devices to be charged with the power bank using the USB A port and start the charging process by pressing the function key. 5. Recharge the power bank when the capacity is almost exhausted, indicated by blinking of the last status LED. 6. Charge the power bank fully at least every three months for optimal performance. 7. Ensure proper heat dissipation by placing the power bank on a firm and heat-resistant base during use.

What are the proper disposal guidelines for old batteries and electronic equipment to ensure environmental protection and compliance with regulations?

To ensure environmental protection and compliance with regulations, follow these steps for the proper disposal of old batteries and electronic equipment from the Intenso PM5200 power bank: 1. Dispose of old batteries separately from municipal waste through designated collection facilities appointed by the government or local authorities. This action helps prevent environmental damage. 2. Similarly, dispose of old electronic equipment separately from municipal waste via designated collection facilities to avoid environmental harm. 3. The packaging material of the product is suitable for recycling and reuse, so pay attention to local recycling provisions when disposing of any materials. By following these guidelines, you contribute to environmental protection and comply with regulations for the disposal of old batteries and electronic equipment.

Is the manual of the Intenso PM5200 available in English?

Yes, the manual of the Intenso PM5200 is available in English .

Is your question not listed? Ask your question here

No results