Installing an Intel SSD consists of three main steps:
Before you Begin
•Download and savethe Intel Data Migration Software to your current storage device:
http://www.intel.com/go/ssdinstallation
•Confirm you have the necessary hardware for installation:
Note:Contents vary based on package purchased.
This guide explains how to install an Intel
®
Solid-State Drive
(Intel
®
SSD) in a SATA-based desktop or notebook computer.
The instructions include migrating your data from your current
storage device (such as a hard disk drive) to your new Intel SSD
using Intel
®
Data Migration Software.
1.
Connect the Intel SSD to your computer.
2.
Migrate your data from your current storage device to your new Intel SSD.
3.
Swap the placement of your current storage device with your new Intel SSD.
Hardware itemRequired for
1. SATA-to-SATA interface cableDesktop computers
2.SATA power adapterDesktop computers without a SATA power cable
3.3.5-inch mounting adapter and screwsDesktop computers with 3.5-inch drive bay
4.USB-to-SATA cableNotebook computers
5.Drive sleeveNotebook computers (optional - for use with your old
storage device after the SSD is installed)
6.Phillips screwdriverMost computers
2
1
34
5
6
Manual
View the manual for the Intel 600p here, for free. This manual comes under the category solid state drives (SSD) and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Intel 600p or do you need help? Ask your question here
Need help?
Do you have a question about the Intel and is the answer not in the manual?
Question and answer
Number of questions: 0