Insignia NS-32E570A11 manual

Insignia NS-32E570A11
9.3 · 1
PDF manual
 · 48 pages
English
manualInsignia NS-32E570A11
17
Insignia 32" LED-LCD HDTV, 1080p
www.insigniaproducts.com
Sports (a dynamic picture)
Custom (customized picture).
Brightness—Adjusts the brightness.
Contrast—Adjusts the contrast.
Color—Adjusts the color saturation.
Tint—Adjusts the image tint.
Sharpness—Adjust the sharpness.
Advanced Video—Opens the
PICTURE-Advanced Video menu where you can
adjust additional video options.
Aspect Ratio—Selects the aspect ratio of
the picture. You can select Normal (selects
the correct aspect ratio to match the
source image), Wide (shows a full-screen
picture), Zoom (enlarges the picture but
may crop the top and bottom), Cinema
(stretches the picture at the edges, but
maintains a good aspect ratio at the center
of the screen), or Auto (select the correct
aspect ratio automatically) if Auto Zoom in
the CHANNELS menu is set to On. When
Auto Zoom in the CHANNELS menu is set
to Off, only Normal, Wide, Zoom, or
Cinema can be selected.
Overscan—Adjusts the picture’s
reproduction rate. You can select On or
Off.
Color TemperatureSelects the color
temperature. You can select Cool (to
enhance the blues), Normal, or Warm (to
enhance the reds).
Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Low, Middle, High,
or
Off.
Backlight—Sets the overall brilliance of
the screen.
Advanced Contrast—Opens the
PICTURE-Advanced Video-Advanced
Contrast menu where you can adjust the
following:
Adaptive Contrast—Automatically
adjusts picture detail and brightness.
You can select On or Off.
Dynamic Contrast Ratio—Enhances
the contrast ratio between light and
dark areas of the picture. You can select
On or Off.
Insignia Motion 120—Delivers clear and fast
action images by reducing motion blur in
fast-paced programming like sports. Image
refresh rate increases to 120 frames per
second (120 Hz). You can select Off, Low,
24p Film Mode, Medium, or High. If you
notice a ghosting effect or other video artifact
in some content, or other artifact, select LOW
mode.
Reset Picture Settings—Reset all picture
settings to factory mode.
4 Press or to adjust the option, or press or
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Fitting the picture to the screen

In TV mode only, your TV can automatically adjust
the picture so that everything fits in the visible
space of the screen.
To fit the picture to the screen:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS, then
press or ENTER. The CHANNELS menu opens.
3 Press or to highlight Auto Zoom, then
press ENTER.
Note
You can also press PICTURE to select the picture
mode.
Notes
Auto is only available in TV mode and when the
Auto Zoom option in the CHANNELS menu is set
to On.
You can also press ZOOM to select the aspect
ratio.
MOVE
OK
ENTER
MENU
EXIT
EXIT
PREVIOUS
SELECT
PICTURE AUDIO CHANNELS SETTINGS USB
Adjust how the picture fills the screen
PICTURE •
Advanced Video
OverScan
Color Temperature
Noise Reduction
Backlight
Advanced Contrast
Off
Cool
Low
100
On
Aspect Ratio
Normal
MOVE
OK
ENTER
MENU
EXIT
EXIT
PREVIOUS
SELECT
PICTURE AUDIO CHANNELS SETTINGS USB
Mode
Brightness
Contrast
Color
Tint
Sharpness
PICTURE
Custom
70
40
60
0
40
Adjust settings to affect picture quality
MOVE
OK
ENTER
MENU
EXIT
EXIT
PREVIOUS
SELECT
PICTURE AUDIO CHANNELS SETTINGS USB
Off
CHANNELS
Channel Strength
Audio Only
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Adjust channel options

Manual

View the manual for the Insignia NS-32E570A11 here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Insignia NS-32E570A11 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Insignia and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
T
Troy CleesenDecember 17, 2022

Can't locate tv power botton

1 comment
A
Alexis November 8, 2023

The power button is on the front side of the tv next to the screen on the right hand side. It is a touch button not a real button.

The power button is on the front side of the tv next to the screen on the right hand side. It is a touch button not a real bu...
zoom-in
View photo
R
Robert WalyzApril 28, 2024

where is the EXIT button remote

Insignia NS-32E570A11 specifications

Below you will find the product specifications and the manual specifications of the Insignia NS-32E570A11.

The Insignia NS-32E570A11 is a television that offers users a reliable and durable viewing experience. It features a 32-inch screen size, providing an adequate display for various entertainment purposes. The television is designed to be user-friendly and easy to navigate, allowing for effortless operation. With its sleek design, the Insignia NS-32E570A11 will seamlessly blend into any living space. Its modern aesthetic ensures that it remains aesthetically pleasing, regardless of its location within the room. The television is equipped with various connectivity options, including HDMI and USB ports, allowing users to connect multiple devices with ease. In terms of picture quality, the Insignia NS-32E570A11 delivers a satisfactory performance. Although specific specifications are not provided, it is designed to offer clear and vibrant visuals, immersing users in their favorite content. The sound quality is also decent, providing an adequate audio experience for everyday use. With regards to durability, the Insignia NS-32E570A11 is constructed using high-quality materials. This ensures that it will withstand regular use without any issues. Additionally, the television is backed by a warranty, providing users with peace of mind and protection against any potential malfunctions. In conclusion, the Insignia NS-32E570A11 is a reliable and durable television that offers an enjoyable viewing experience. With its user-friendly design and adequate features, it is a suitable option for those seeking an affordable and functional TV.

General
BrandInsignia
ModelNS-32E570A11
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Insignia NS-32E570A11 below.

What's the best viewing distance for my Insignia television?

The ideal viewing distance for your Insignia television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

How do I adjust the picture settings on my Insignia NS-32E570A11 television?

To adjust the picture settings on your Insignia NS-32E570A11 television, follow these steps: 1. Press the MENU button on your remote control. The on-screen menu will appear. 2. Use the arrow buttons (either or ) to highlight the PICTURE option, then press ENTER. 3. Within the PICTURE menu, you can adjust various picture settings: - Brightness: Adjusts the brightness level of the picture. - Contrast: Adjusts the contrast level between light and dark areas of the picture. - Color: Adjusts the color saturation of the picture. - Tint: Adjusts the image tint. - Sharpness: Adjusts the sharpness of the picture. 4. Use the arrow buttons to navigate to the desired setting, and then use the arrow buttons or to adjust the setting. 5. Press the MENU button to return to the previous menu, or press the EXIT button to close the menu. By following these steps, you can easily adjust the picture settings on your Insignia NS-32E570A11 television to your preference.

Why is the screen on my Insignia NS-32E570A11 television not displaying any image?

If the screen on your Insignia NS-32E570A11 television is not displaying any image, you can try the following troubleshooting steps: 1. Check the power cord: Ensure that the power cord is securely plugged into a working power outlet and that the power indicator on the front of the TV is lit. 2. Press the power button: Press the power button on the remote control or the TV itself to turn on the TV. 3. Check the picture mode: Make sure that the correct picture mode is selected. You can adjust the picture mode by accessing the picture settings menu. 4. Adjust the brightness: If the picture appears dark or poor, you can adjust the brightness level in the picture settings menu. 5. Check the connection: Ensure that the antenna, cable TV, or satellite TV is connected correctly. Refer to the manual for instructions on connecting these devices. If the issue persists after trying these steps, it is recommended to contact qualified service personnel for further assistance.

How do I connect external devices to my Insignia NS-32E570A11 television?

To connect external devices to your Insignia NS-32E570A11 television, follow these steps: 1. Identify the available ports: Locate the different input ports on the back or side of your TV. Common ports include HDMI, USB, component, and composite. 2. Choose the appropriate cable: Depending on the device you want to connect, select the corresponding cable. For example, use an HDMI cable for high-definition devices or a composite cable for older devices. 3. Connect the cable: Plug one end of the cable into the corresponding port on the TV and the other end into the output port of the external device. 4. Select the input source: Use the TV remote to access the input/source menu. Navigate through the options and select the input source that matches the connected device. 5. Test the connection: Turn on the external device and ensure that the TV displays the content from the connected device. By following these steps, you can easily connect external devices such as gaming consoles, Blu-ray players, or streaming devices to your Insignia NS-32E570A11 television and enjoy their content on the big screen.

Why is the sound not working on my Insignia NS-32E570A11 television?

If the sound is not working on your Insignia NS-32E570A11 television, you can try the following troubleshooting steps: 1. Check the volume level: Ensure that the volume is not muted or set to a very low level. Press the volume up button on the remote control or the TV itself to increase the volume. 2. Check the audio settings: Access the audio settings menu on your TV and make sure that the correct audio output is selected. You can choose between built-in speakers or external audio devices. 3. Check the audio cables: If you have external audio devices connected to your TV, such as a soundbar or speakers, ensure that the audio cables are securely connected to both the TV and the external device. 4. Restart the TV: Sometimes, a simple restart can resolve sound issues. Turn off the TV, unplug it from the power source, wait for a few minutes, and then plug it back in and turn it on. 5. Perform a factory reset: If none of the above steps work, you can try performing a factory reset on your TV. Refer to the user manual for instructions on how to perform a factory reset. By following these steps, you can troubleshoot and resolve sound issues on your Insignia NS-32E570A11 television.

How do I access the menu options on my Insignia NS-32E570A11 television?

To access the menu options on your Insignia NS-32E570A11 television, follow these steps: 1. Locate the MENU button: Look for the MENU button on your TV remote control. It is usually labeled as "MENU" or represented by an icon with three horizontal lines. 2. Press the MENU button: Press the MENU button to open the on-screen menu. This will display various options and settings. 3. Navigate through the menu: Use the arrow buttons on your remote control (usually labeled as up, down, left, and right) to navigate through the menu options. The current selection will be highlighted. 4. Select an option: Once you have highlighted the desired option, press the ENTER or OK button on your remote control to select it. This will open a submenu or display additional settings. 5. Adjust settings: Within each menu option, you can use the arrow buttons to navigate and the ENTER or OK button to make selections or adjustments. Follow the on-screen instructions or refer to the user manual for specific settings and options. By following these steps, you can easily access and navigate the menu options on your Insignia NS-32E570A11 television to customize and adjust various settings according to your preferences.

Is the manual of the Insignia NS-32E570A11 available in English?

Yes, the manual of the Insignia NS-32E570A11 is available in English .

Is your question not listed? Ask your question here

No results