This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Warning
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC Rules
and Regulations.
Canadian Notice
CAN ICES-3 (B)/NMB-3(B)
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
Dolby License Notice and Trademark Acknowledgement
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
HDMI
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
HDMI
2 (side)
E-EDID compliant
HDCP compliant
Component video1 (back)
Composite video
1 (back)
Shared with component Y
Shared audio (component
and composite)
Ye s
S-VideoNo
PC/VGANo
3.5mm DVI audio input1 (side)
DVI
1 (side)
HDMI 1 (DVI+ARC) jack
USB
1 (side)
Supports JPEG and firmware upgrade
Antenna/Cable1 (side)
VideoNo
Analog audio/Headphone1 (side)
Digital audio1 (optical) (side)
WiFiNo
EthernetNo
Speakers
Number: 2
Watts per channel: 5W
Power consumption
On: 60W
Standby: <0.5W
Power inputAC 120 V, 60Hz
OSD languagesEnglish, French, Spanish
INlinkYe s
Game ModeNo
ENERGY STAR qualifiedNo
Internet connectableNo
TV base screws
Stand column to TV screen:
M4 type (12 mm length) (2 pcs)
T4 type (12 mm length) (2 pcs)
Base to stand column:
T4 type (12 mm length) (4 pcs)
V-Chip (version 2.0)Ye s
Sleep timerYe s
Channel labelingYe s
VESA mount (mm)
(horizontal × vertical)
400 × 200
VESA mount screws
M6 type
Note
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
Manual
View the manual for the Insignia LE-37MY83 here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Insignia LE-37MY83 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Insignia LE-37MY83 below.
What's the best viewing distance for my Insignia television?
The ideal viewing distance for your Insignia television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.
My television has no signal anymore, now what?
If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.
What screen dimensions does my television have?
The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Can bluetooth devices of different brands be connected to each other?
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Is the manual of the Insignia LE-37MY83 available in English?
Yes, the manual of the Insignia LE-37MY83 is available in English .
Need help?
Do you have a question about the Insignia and is the answer not in the manual?
Question and answer
Number of questions: 0