Innovaphone IP800 manual

Innovaphone IP800
6.6 · 1
PDF manual
 · 2 pages
English
manualInnovaphone IP800

Quick Installation Guide: How to get started?

Installation guide for innovaphone gateways and analogue adapters

innovaphone® AG, Böblinger Straße 76, 71065 Sindelfingen, Germany, Tel +49 7031 7 30 09-0, Fax +49 70 31 7 30 09-99
info@innovaphone.com, www.innovaphone.com, Version: June 2012, Copyright © 2012 innovaphone® AG
Errors and omissions excepted. All information, technical specifications and delivery times may be subject to change.
Set-up
When installing the device, please ensure it has sufficient ventilation, especially when the
device is installed in a closed cabinet. A special frame for 19” racks is available for
mounting two devices in one height unit. (product number 01-00999-001).
The device is only designed for use in dry rooms. Operating temperature is between 0 °C
and 40 °C with relative humidity of 10 % to 90 % (non-condensing). Hardware problems
can occur if the device is used in environments outside of this range. Please wait until the
device has adapted to the new environment before carefully putting the device into
operation.
Reduce the risk of accidents by laying the connecting cables carefully. Take care not to
bend, pull or put too much mechanical strain on all connecting cables.
Power supply
The power supply may, depending on the device type, have an internal or external mains
adapter. All innovaphone devices can also use Power over Ethernet (PoE) according to
IEEE 802.3af to get their electricity over the network. All types of electrical power can be
connected simultaneously and can replace each another if one power source fails.
When used with the mains adapter, the device is designed for an AC network with 100V-
240 V and 50 Hz. Never attempt to connect the device to other mains supplies. Use only
the mains adapter and power cable supplied. Other mains adapters and power cables
could damage the device. Please note! Special cables that can be ordered from
innovaphone are necessary for Switzerland, Great Britain and Italy. Please consult the
innovaphone price list for further details.
The device is switched on as soon as it is connected to the power supply and the LED
labelled Ready is illuminated. The device cannot be operated if the network fails. However,
the device maintains its settings.
Configuration
Use the Ethernet cable to connect the device to your network. Device configuration takes
place over a web browser using the device’s IP address.
There are various different ways of putting a device into operation and assigning an IP
address to it. Initially, the device will try to establish a connection to the DHCP server. If
this is possible and the device is in the same subnet, the NetBIOS method can be used.
The NetBIOS name is made up of the device model and part of the MAC address as
follows: IPXXX-YY-YY-YY, whereby the symbol X should be replaced with the device
model name and the symbol Y with the last three Byte of the gateway's MAC address(e.g.
IP6010-06-15-B2 or IP28-05-14-B1). The MAC address can be found on the sticker at the
back of the device.
If your device is in a different subnet, access can take place over the IP address. You can
determine which IP address has been assigned with the help of the MAC address from the
DHCP lease.
If it is not possible to set up a connection to a DHCP server, it is necessary to short press
the Reset button. This assigns a static IP address to both Ethernet ports – either
192.168.0.1 (ETH0) or 192.168.1.1 (ETH1). Attention: the computer has to be in the
same subnet.

Manual

View the manual for the Innovaphone IP800 here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Innovaphone IP800 or do you need help? Ask your question here

Need help?

Do you have a question about the Innovaphone IP800 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Innovaphone IP800 owners to provide you with a good answer.

Number of questions: 0

Innovaphone IP800 specifications

Below you will find the product specifications and the manual specifications of the Innovaphone IP800.

General
Brand Innovaphone
Model IP800
Product Not categorized
EAN 4260048180065
Language English
Filetype Usermanual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Innovaphone IP800 below.

Is your question not listed? Ask your question here

No results