Indesit IWDC 6125 manual

Indesit IWDC 6125
8.6 · 38
PDF manual
 · 16 pages
English
manualIndesit IWDC 6125
2
GB

Installation

This instruction manual should be kept in a safe

place for future reference. If the washer-dryer is sold,
transferred or moved, make sure that the instruction
manual remains with the machine so that the new
owner is able to familiarise himself/herself with its
operation and features.

Read these instructions carefully: they contain vital

information relating to the safe installation and
operation of the appliance.

Unpacking and levelling

Unpacking
1. Remove the washer-dryer from its packaging.
2. Make sure that the washer-dryer has not been
damaged during the transportation process. If it has
been damaged, contact the retailer and do not
proceed any further with the installation process.
3. Remove the 4
protective screws (used
during transportation) and
the rubber washer with
the corresponding
spacer, located on the
rear part of the appliance
(see figure).
4. Close off the holes using the plastic plugs provided.
5. Keep all the parts in a safe place: you will need
them again if the washer-dryer needs to be moved to
another location.

Packaging materials should not be used as toys for

children.
Levelling
1. Install the washer-dryer on a flat sturdy floor,
without resting it up against walls, furniture cabinets
or anything else.
2. If the floor is not
perfectly level, compen-
sate for any unevenness
by tightening or loosening
the adjustable front feet
(see figure); the angle of
inclination, measured in
relation to the worktop,
must not exceed 2°.
Levelling the machine correctly will provide it with
stability, help to avoid vibrations and excessive noise
and prevent it from shifting while it is operating. If it is
placed on carpet or a rug, adjust the feet in such a
way as to allow a sufficient ventilation space
underneath the washer-dryer.

Connecting the electricity and water

supplies

Connecting the water inlet hose
1. Connect the supply
pipe by screwing it to a
cold water tab using a ¾
gas threaded connection
(see figure).
Before performing the
connection, allow the
water to run freely until it
is perfectly clear.
2. Connect the inlet hose
to the washer-dryer by
screwing it onto the
corresponding water inlet
of the appliance, which is
situated on the top right-
hand side of the rear part
of the appliance (see
figure).
3. Make sure that the hose is not folded over or bent.

The water pressure at the tap must fall within the

values indicated in the Technical details table (see
next page).

If the inlet hose is not long enough, contact a

specialised shop or an authorised technician.

Never use second-hand hoses.

Use the ones supplied with the machine.

View the manual for the Indesit IWDC 6125 here, for free. This manual comes under the category washing machines and has been rated by 38 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Indesit IWDC 6125 or do you need help? Ask your question here

Need help?

Do you have a question about the Indesit and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 13
E
EdytaAugust 28, 2023

The flashing lights on the washing machine/dryer indicate that it has filled with water and stopped. How can I drain the water if I can't find the cleaning filter?

The flashing lights on the washing machine/dryer indicate that it has filled with water and stopped. How can I drain the wate...
zoom-in
View photo
This message has been automatically translated
A
AgaApril 16, 2018

Hello, I beg for help!!! I have a washing machine-dryer Indesit IWDC6143. Specifically, my clothes come out wrinkled! I ruined my son's school uniform:///Please help because even the "to wardrobe" settings for me are useless, because it wrinkles every wash. Is it possible to turn off the drying function in this washing machine? I have tried many times and it still dries:////Please help!

This message has been automatically translated
B
Barbara O NeillDecember 7, 2023

Just want to wash one cotton long sleeved top what was no do I use on the indesit C6125

T
Tracie MilesAugust 30, 2022

How do you use a quick wash on the Indesit IWDC6125 washing machine what numbers do you press

S
Steve DanfordSeptember 2, 2021

Where can I get a list of fault codes for the Indecit IWDC 6125?

E
EmmaDecember 17, 2021

All lights are flashing and machine is locked after finishing cycle

All lights are flashing and machine is locked after finishing cycle
zoom-in
View photo
C
Cihan HarmanciNovember 7, 2020

IS THERE PRE WASH OPTION ON INDESİT IWDC 6125?

A
AimeeSeptember 13, 2021

How do you put a quick wash on

M
Michelle December 28, 2021

Brand new washing machine all pipes are inside cannot open the door

The Indesit IWDC 6125 is a freestanding washing machine with a rated capacity of 5 kg for both washing and drying. It has a maximum spin speed of 1200 RPM, allowing for efficient and effective drying of clothes. The door hinge is located on the left side, providing easy access to the drum. With a washing class rating of A and a spin-drying class rating of B, this washing machine offers reliable performance in both washing and drying clothes. It has a rated capacity of 6 kg for washing, ensuring that you can clean a good amount of laundry in one cycle. The cycle time for washing is 145 minutes, providing ample time for thorough cleaning of clothes. Additionally, the washing machine offers 16 different washing programs, allowing you to tailor the wash to your specific needs. For those who need to wash and dry their clothes in one go, the cycle time for washing and drying is 180 minutes. However, it is worth noting that the annual energy consumption for washing and drying is 972 kWh, which may be something to consider for energy-conscious individuals. Overall, the Indesit IWDC 6125 is a reliable and efficient washing machine that offers a range of washing programs to suit different needs. Its robust construction and high-quality materials ensure durability over time.

General
BrandIndesit
ModelIWDC 6125 | IWDC 6125
Productwashing machine
EAN8007842624809, 8007842625028, 8007842625059, 8007842787474
LanguageEnglish
FiletypeUser manual (PDF)
Design
Loading typeFront-load
Appliance placementFreestanding
Door hingeLeft
Drum volume52 L
Viewing windowYes
Control typeButtons, Rotary
Display type-
Built-in displayNo
Product colorWhite
Performance
Drying capacity5 kg
Maximum spin speed1200 RPM
Spin-drying classB
Washing capacity6 kg
Cycle time washing145 min
Number of washing programs16
Cycle time washing & drying180 min
Number of drying programs2
Yes
AquaStop function-
Delayed start timerYes
Anti-Crease function-
Adjustable spin speedYes
Minimum spin speed600 RPM
Noise level (spin)60 dB
Load balancing systemYes
Rinse Plus functionYes
Quick
Hand/wool, Jeans/denim, Quick, Sport, Synthetics, Delicate/silk
Other features
Washing classA
Annual energy consumption washing & drying972 kWh
Annual water consumption washing & drying20800 L
B
Power
Energy consumption washing per cycle- kWh
Energy consumption washing & drying per cycle- kWh
Water consumption washing & drying per cycle- L
Ergonomics
Child lock-
Weight & dimensions
Width595 mm
Depth535 mm
Height850 mm
Weight64000 g
Package width650 mm
Package depth590 mm
Package height890 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Indesit IWDC 6125 below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

What is the weight of the Indesit IWDC 6125?

The Indesit IWDC 6125 has a weight of 64000 g.

What is the height of the Indesit IWDC 6125?

The Indesit IWDC 6125 has a height of 850 mm.

What is the width of the Indesit IWDC 6125?

The Indesit IWDC 6125 has a width of 595 mm.

What is the depth of the Indesit IWDC 6125?

The Indesit IWDC 6125 has a depth of 535 mm.

What is the maximum spin speed of the Indesit IWDC 6125?

The maximum spin speed of the Indesit IWDC 6125 is 1200 RPM. This high spin speed means that clothes will come out of the machine with less water, reducing drying time and energy consumption for the user.

What is the washing class of the Indesit IWDC 6125?

The washing class of the Indesit IWDC 6125 is A. This means that it provides efficient and effective washing performance, ensuring that clothes are thoroughly cleaned with each wash.

Does the Indesit IWDC 6125 have adjustable spin speed?

Yes, the Indesit IWDC 6125 has adjustable spin speed. This feature allows the user to customize the spin speed according to their needs, providing flexibility and control over the washing and drying process.

How many washing programs does the Indesit IWDC 6125 have?

The Indesit IWDC 6125 has 16 washing programs. This wide range of programs offers versatility and options for different types of fabrics and laundry needs, ensuring optimal cleaning results.

Does the Indesit IWDC 6125 have a delayed start timer?

Yes, the Indesit IWDC 6125 has a delayed start timer. This feature allows the user to set a specific time for the washer to start, providing convenience and flexibility for scheduling laundry tasks according to their preferences.

How do I connect the waste water pipe to the Indesit IWDC 6125 washing machine?

To connect the waste water pipe to the Indesit IWDC 6125 washing machine, follow these steps: 1. Locate the waste water outlet on the back of the washing machine. It is usually located near the bottom of the machine. 2. Remove the blanking cap from the waste water outlet. This cap is used to seal the outlet during transportation and should be removed before connecting the pipe. 3. Take the waste water pipe and insert one end into the waste water outlet on the washing machine. Make sure it fits securely. 4. Connect the other end of the waste water pipe to the waste water drain or plumbing system in your home. Ensure that it is securely attached to prevent any leaks. 5. Check that the waste water pipe is properly aligned and does not have any kinks or bends that could restrict the flow of water. 6. Once the waste water pipe is connected, you can test the washing machine by running a cycle and checking for any leaks or drainage issues. By following these steps, you will be able to connect the waste water pipe to the Indesit IWDC 6125 washing machine effectively.

What are the steps to operate the Indesit IWDC 6125 washing machine?

To operate the Indesit IWDC 6125 washing machine, follow these steps: 1. Start by plugging in the washing machine and ensuring that the water supply is connected. 2. Open the door of the washing machine and load your laundry into the drum. Make sure not to overload the machine. 3. Close the door securely and select the desired wash program using the control panel. You can choose from various options such as cotton, synthetic, delicates, and more. 4. Adjust the temperature and spin speed settings according to your preference and the type of fabric you are washing. 5. If needed, add detergent and fabric softener to the appropriate compartments in the detergent drawer. 6. Press the start button to begin the wash cycle. The machine will automatically fill with water and start washing your clothes. 7. During the wash cycle, you can pause or cancel the program if necessary. 8. Once the wash cycle is complete, the machine will automatically drain the water and proceed to the spin cycle. 9. After the spin cycle, you can open the door, remove your clean laundry, and close the door again. 10. Finally, unplug the washing machine and clean the drum and detergent drawer to maintain its performance. By following these steps, you will be able to operate the Indesit IWDC 6125 washing machine effectively.

What do the error codes on the Indesit IWDC 6125 washing machine mean?

The error codes on the Indesit IWDC 6125 washing machine indicate specific issues or malfunctions. Here are some of the common error codes and their meanings: 1. E10: This error code indicates a problem with the water inlet. Check if the water supply is turned on and the inlet hose is not kinked or blocked. 2. E20: This error code indicates a drainage issue. Make sure the waste water pipe is not blocked or kinked, and check the drain filter for any obstructions. 3. E30: This error code indicates a problem with the motor. It could be due to a faulty motor or a wiring issue. Contact a service technician for assistance. 4. E40: This error code indicates a door lock issue. Check if the door is properly closed and locked. If the problem persists, there may be a fault with the door lock mechanism. 5. E90: This error code indicates a communication problem between the control board and other components. Try resetting the machine by unplugging it for a few minutes and then plugging it back in. If you encounter any of these error codes on your Indesit IWDC 6125 washing machine, refer to the troubleshooting section of the manual for further instructions or contact customer support for assistance.

How do I clean and maintain the Indesit IWDC 6125 washing machine?

To clean and maintain the Indesit IWDC 6125 washing machine, follow these steps: 1. Regularly clean the exterior of the machine using a soft cloth and mild detergent. Avoid using abrasive cleaners that may damage the surface. 2. Clean the detergent drawer by removing it from the machine and rinsing it under running water. Remove any residue or buildup and ensure it is completely dry before reinserting. 3. Check and clean the door seal regularly. Wipe it with a damp cloth to remove any dirt or debris that may accumulate. 4. Clean the drum by running a maintenance wash cycle. Add a cup of white vinegar or a washing machine cleaner to the drum and run a hot wash cycle without any laundry. 5. After each wash, leave the door open for a while to allow the drum to dry and prevent the growth of mold or mildew. 6. Check and clean the filter regularly. Locate the filter at the bottom front of the machine, remove it, and clean it under running water. Make sure to remove any lint or debris. 7. Inspect the water inlet hoses for any signs of damage or blockage. If necessary, clean or replace the hoses to ensure proper water flow. 8. Periodically check the leveling of the machine and adjust the feet if needed to ensure stability and proper operation. By following these steps, you can effectively clean and maintain your Indesit IWDC 6125 washing machine, ensuring its optimal performance and longevity.

What are the technical specifications and dimensions of the Indesit IWDC 6125 washing machine?

The technical specifications and dimensions of the Indesit IWDC 6125 washing machine are as follows: - Dimensions (H x W x D): Approximately 85 cm x 59.5 cm x 53.5 cm - Weight: Approximately 64 kg - Capacity: The washing machine has a maximum load capacity of 6 kg for washing and 5 kg for drying. - Energy Efficiency Class: The Indesit IWDC 6125 has an energy efficiency rating of A. - Spin Efficiency Class: The spin efficiency rating is B. - Water Consumption: The estimated annual water consumption is 10,800 liters per year, based on 220 standard washing cycles. - Noise Level: The maximum noise level during the wash cycle is 58 dB, and during the spin cycle, it is 81 dB. These specifications provide an overview of the size, weight, capacity, energy efficiency, water consumption, and noise level of the Indesit IWDC 6125 washing machine.

Is the manual of the Indesit IWDC 6125 available in English?

Yes, the manual of the Indesit IWDC 6125 is available in English .

Is your question not listed? Ask your question here

No results