Imation DAT160 manual

Imation DAT160
  • Number of pages: 1
  • Filetype: PDF

Imation Product Environmental Sheet

The information and recommendations set forth are made in good faith and are believed to be accurate at the date of preparation.
Imation makes no warranty expressed or implied.
Page 1 of 1 Rev. January 31, 2006

4, 8 mm DDS/DAT Tape Products

Imation Corp.
1 Imation Way
Oakdale, MN 55128-3414
Product Information USA:
International Contacts:
Telephone Email
Germany 09001.462846
Italy 02.2104.3818
Netherlands 020.654.26.05
Spain 091.382.84.05
UK 0.1344.862.201
DDS/DAT Tape Products, are considered “articles” as defined by the OSHA Hazard Communication Standard [29CFR
1910.1200]. As such, these products are exempt from the Standard and Material Safety Data Sheet requirements. This
Product Information Sheet is provided as a resource to our customers.
The following components are found in Imation DDS/DAT Tape Products:
Components Material Weight Percent of Product
Plastic Components Acrylonitrile butadiene styrene (ABS) 10-12
Film Substrate PET 3-4
Coating Iron-cobalt alloy magnetic particle <2
Binder Combined resin <1
Metal Parts Stainless steel <1
Store in a dry area, away from excessive heat, moisture, chemical fumes and magnetic fields.
Imation has conducted Toxic Characteristic Leachate Procedure (TCLP) tests, per the EPA testing protocol for
hazardous waste. These Imation Brand products are not considered regulated waste and are within Federal
regulatory limits for TCLP.
Check with state and local regulations before disposal as they may differ from the Federal classification.
DDS/DAT Tape Products may be landfilled if permissible, recycled or incinerated.
Product components and packaging comply with European RoHS and WEEE laws.
Product components and packaging do not contain or use substance groups of level A that are documented in Japan
Green Procurement Survey Standardization Initiative.
Other international disposal or recycling requirements may apply.
DDS/DAT Tape Products are not subject to the requirements of Department of Transportation (DOT) 49 CFR,
Subchapter C, Hazardous Materials Regulations (HMR), the European ADR/RID Dangerous Goods Regulations, or
the Japan Transportation Ministry Dangerous Goods Regulations.
DDS/DAT Tape Products are not regulated as a Hazardous Material by the International Civil Aviation Organization
(ICAO), the International Air Transport Association (IATA) or the International Maritime Dangerous Goods Code
Combustion temperature of ABS plastic: 650-750
F (350-400
C) .
The ABS plastic is the primary combustible component, which will oxidize in a fire to carbon dioxide, carbon
monoxide, and water, with secondary combustion products of carbon (ash), acrylonitrile and hydrogen cyanide. The
coatings will oxidize to similar products. (Contains no PVC plastic.)
Extinguishing Media: Water
Imation DAT160

Need help?

Number of questions: 0

Do you have a question about the Imation DAT160 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Imation DAT160 owners to properly answer your question.

View the manual for the Imation DAT160 here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Imation DAT160 or do you need help? Ask your question here

Imation DAT160 specifications

Brand Imation
Model DAT160
Product Not categorized
Language English
Filetype PDF
Weight & dimensions
Tape size 4 mm
Other features
Total storage capacity 80 GB
Compressed capacity 160 GB
Tape type Tape Cartridge
Native capacity 80 GB
Data transmission
Transfer rate 14 MB/s
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Imation DAT160.

Is your question not listed? Ask your question here