iconBIT Smart Scooter SD-0002K manual

iconBIT Smart Scooter SD-0002K
8.8 · 1
PDF manual
 · 52 pages
English
manualiconBIT Smart Scooter SD-0002K
Thank you for purchasing our product. For optimum performance and safety, please read these instructions carefully before operating the product. Please keep this manual for future reference.

Manual

View the manual for the iconBIT Smart Scooter SD-0002K here, for free. This manual comes under the category self-balancing scooters and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the iconBIT Smart Scooter SD-0002K or do you need help? Ask your question here

Need help?

Do you have a question about the iconBIT and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

iconBIT Smart Scooter SD-0002K specifications

Below you will find the product specifications and the manual specifications of the iconBIT Smart Scooter SD-0002K.

General
BrandiconBIT
ModelSmart Scooter SD-0002K | SD-0002K
Productself-balancing scooter
EAN4895160631838
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Maximum speed15 km/h
Autonomy (max)20 km
Maximum gradient15 °
Power
Power700 W
AC adapter frequency50/60 Hz
Battery technology-
Battery capacity- mAh
Battery capacity158 Wh
Design
Product colorBlack
Maximum load weight110 kg
Wheel size- mm
LED indicatorsActivity
Product typeSelf-balancing scooter
Weight & dimensions
Weight10200 g
Width604 mm
Depth186 mm
Height178 mm
Package width670 mm
Package depth260 mm
Package height260 mm
Package weight12200 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the iconBIT Smart Scooter SD-0002K below.

What is the weight of the iconBIT Smart Scooter SD-0002K?

The iconBIT Smart Scooter SD-0002K has a weight of 10200 g.

What is the height of the iconBIT Smart Scooter SD-0002K?

The iconBIT Smart Scooter SD-0002K has a height of 178 mm.

What is the width of the iconBIT Smart Scooter SD-0002K?

The iconBIT Smart Scooter SD-0002K has a width of 604 mm.

What is the depth of the iconBIT Smart Scooter SD-0002K?

The iconBIT Smart Scooter SD-0002K has a depth of 186 mm.

What is the maximum speed of the iconBIT Smart Scooter SD-0002K?

The maximum speed of the iconBIT Smart Scooter SD-0002K is 15 km/h. This speed allows for a brisk and efficient commute while maintaining a safe and controlled ride.

What is the autonomy range of the iconBIT Smart Scooter SD-0002K?

The iconBIT Smart Scooter SD-0002K has a maximum autonomy of 20 km. This means that users can cover a considerable distance on a single charge, making it suitable for daily commutes or short trips.

What is the maximum gradient that the iconBIT Smart Scooter SD-0002K can handle?

The iconBIT Smart Scooter SD-0002K can handle a maximum gradient of 15°. This ensures that users can effortlessly navigate inclines and hills without compromising on stability or safety.

How much power does the iconBIT Smart Scooter SD-0002K have?

The iconBIT Smart Scooter SD-0002K has a power of 700 W. This power enables the scooter to deliver reliable performance, providing a smooth and responsive ride even in challenging terrains.

Are there any LED indicators on the iconBIT Smart Scooter SD-0002K?

Yes, the iconBIT Smart Scooter SD-0002K is equipped with LED indicators. These indicators display activity, allowing users to easily monitor the status of the scooter and ensure optimal functionality.

How do I calibrate the balance of the iconBIT Smart Scooter SD-0002K self-balancing scooter?

To calibrate the balance of the iconBIT Smart Scooter SD-0002K self-balancing scooter, follow these steps: 1. Start by placing the scooter on a flat surface, ensuring it is level and stable. 2. Press and hold the power button located on the front of the scooter, next to the 3-pin charging port. 3. Check the display board located in the center of the scooter. It should power on and emit a beep, indicating that it is turned on. The battery indicator light should also be lit, confirming that there is power to the device. 4. Stand behind the scooter and place one foot on the scooter while keeping all your weight on your back foot that is still on the ground. This will prevent the scooter from moving while you calibrate the balance. 5. Shift your weight to the foot already placed on the scooter and quickly and evenly step on with your second foot. Imagine climbing a stair, one foot, then the other. Once your feet are even, try to look up and allow a few seconds for the scooter to adjust the center of gravity according to your weight and the friction on the road. 6. To ensure proper balance, distribute your weight evenly on the foot mats and find your center of gravity. You should be able to stand on the scooter as if you were standing on the ground. If you feel like you are moving in a particular direction, turning, spinning in place, wobbling back and forth, or feeling uncomfortable, you may need to readjust your balance. 7. It is normal to take 3-5 minutes to get comfortable standing on the scooter and maintaining proper balance. Having a spotter can help you feel more secure during this process. Remember to stay relaxed, stand evenly, and apply an equal amount of pressure on both sides of the device. Relax your muscles as much as possible, take deep breaths, and slightly bend your knees to help maintain balance. If you begin to turn in a particular direction, focus on turning in the opposite direction to stop turning. By following these steps, you can calibrate the balance of your iconBIT Smart Scooter SD-0002K self-balancing scooter and ensure a stable and enjoyable riding experience.

What should I do if the iconBIT Smart Scooter SD-0002K self-balancing scooter is not responding to my movements?

If the iconBIT Smart Scooter SD-0002K self-balancing scooter is not responding to your movements, you can try the following steps: 1. Check the power: Ensure that the scooter is turned on and that the battery is sufficiently charged. Make sure the Running Indicator light is green. If it is red, do not step on the scooter. 2. Restart the scooter: Turn off the scooter and then turn it back on again. This can help reset any temporary issues or glitches. 3. Check for obstacles: Make sure there are no obstacles or debris obstructing the wheels or sensors of the scooter. Clear any obstructions that may be interfering with its movement. 4. Calibrate the balance: Follow the steps mentioned in the manual to calibrate the balance of the scooter. This process helps the scooter adjust to your weight and center of gravity. 5. Check for error codes: If there are any error codes displayed on the scooter's control panel, refer to the manual for troubleshooting steps specific to those codes. 6. Contact customer support: If the issue persists and you have tried the above steps, it is recommended to contact customer support for further assistance. They can provide additional troubleshooting guidance or arrange for repairs if necessary. By following these steps, you can troubleshoot and address the issue of the iconBIT Smart Scooter SD-0002K self-balancing scooter not responding to your movements.

How can I troubleshoot if the iconBIT Smart Scooter SD-0002K self-balancing scooter is not turning properly?

To troubleshoot if the iconBIT Smart Scooter SD-0002K self-balancing scooter is not turning properly, you can follow these steps: 1. Check the surface: Ensure that you are riding the scooter on a smooth and even surface. Rough or uneven terrain can affect the scooter's turning ability. 2. Check the tire pressure: Make sure that the tires are properly inflated according to the recommended pressure mentioned in the manual. Low tire pressure can impact the scooter's maneuverability. 3. Calibrate the balance: Follow the steps provided in the manual to calibrate the balance of the scooter. This process helps the scooter adjust to your weight and center of gravity, which can improve its turning performance. 4. Check for obstructions: Inspect the wheels and the area around them for any debris, such as rocks or sticks, that may be interfering with the scooter's movement. Clear any obstructions that you find. 5. Adjust your body position: When turning, shift your weight slightly in the direction you want to turn. Lean your body and shoulders in that direction while keeping your feet level on the foot mats. This can help initiate and control the turning motion. 6. Practice turning techniques: Experiment with different turning techniques, such as leaning more or less, to find the most comfortable and effective way to turn the scooter. Practice in a safe and open area until you feel confident in your turning abilities. By following these steps, you can troubleshoot and improve the turning performance of your iconBIT Smart Scooter SD-0002K self-balancing scooter.

What should I check if the iconBIT Smart Scooter SD-0002K self-balancing scooter is not moving forward or backward?

If the iconBIT Smart Scooter SD-0002K self-balancing scooter is not moving forward or backward, you can check the following: 1. Power and battery: Ensure that the scooter is turned on and that the battery is sufficiently charged. Check the Running Indicator light to confirm if the scooter has power. If the battery is low, charge it according to the instructions in the manual. 2. Safety mode: Check if the scooter is in safety mode. Safety mode can prevent the scooter from moving. To disable safety mode, turn off the scooter, wait for a few seconds, and then turn it back on. 3. Foot placement: Make sure that your feet are properly positioned on the foot mats. Both feet should be placed flat and evenly on the foot mats, with your weight distributed evenly. 4. Sensor calibration: Follow the steps provided in the manual to calibrate the balance and sensors of the scooter. Sensor calibration can help ensure accurate movement and responsiveness. 5. Obstructions: Check for any obstructions or debris that may be blocking the wheels or sensors of the scooter. Clear any obstructions to allow for smooth movement. 6. Riding surface: Ensure that you are riding the scooter on a flat and even surface. Rough or uneven terrain can affect the scooter's ability to move forward or backward. By checking these factors, you can troubleshoot and identify potential issues that may be causing the iconBIT Smart Scooter SD-0002K self-balancing scooter to not move forward or backward.

How do I troubleshoot if the iconBIT Smart Scooter SD-0002K self-balancing scooter is not maintaining stability during turns?

To troubleshoot if the iconBIT Smart Scooter SD-0002K self-balancing scooter is not maintaining stability during turns, you can follow these steps: 1. Check your center of gravity: During turns, focus on maintaining your center of gravity over the scooter. Tilt your body slightly in the direction you want to turn and stay relaxed. This helps the scooter respond to your movements and maintain stability. 2. Bend your knees: When riding on bumpy or uneven surfaces, bend your knees slightly to absorb shocks and vibrations. This can help you maintain balance and stability during turns. 3. Avoid sharp turns at high speeds: Turning sharply at high speeds can increase the risk of losing stability. It is recommended to take turns gradually and at a controlled speed to maintain stability. 4. Check the riding surface: Ensure that you are riding on a smooth and even surface. Rough or uneven terrain can affect the scooter's stability during turns. If possible, choose a surface that is suitable for self-balancing scooters. 5. Practice and gain experience: Maintaining stability during turns requires practice and experience. Start with slow and gentle turns, gradually increasing your speed and confidence. With time, you will become more comfortable and proficient in maintaining stability during turns. By following these steps, you can troubleshoot and improve the stability of your iconBIT Smart Scooter SD-0002K self-balancing scooter during turns.

Is the manual of the iconBIT Smart Scooter SD-0002K available in English?

Yes, the manual of the iconBIT Smart Scooter SD-0002K is available in English .

Is your question not listed? Ask your question here

No results