iconBIT FTB5200U manual

iconBIT FTB5200U
7.3 · 1
PDF manual
 · 1 page
English
manualiconBIT FTB5200U
Keep your power bank operating to the fullest potential, by
following the below steps:
1. Re-charge your power bank once every three months
when it is not in use.
2. Keep the power bank away from any moist environment
and corrosive material.
3. Never wash the power bank with any chemicals, soaps
or detergents.
1. Simply using the attached USB cable to charge the digital
product, One end of the USB cable connect with the "OUT"
port of the power bank, another end connect with the
digital product with converted tip. Press "ON" button once,
it will start to charge and the green LED will indicate the
charging process.
2. Finishing charging or fail to connect the digital product,
the green LED will stop ashing. And the power bank
will turn o automatically after 30 seconds.
3. When on charging process, the green LED ashes quickly
means low power and need to charge the power bank
in time.
Note: If the instantaneous current is oversize when charging
the digital product, the power bank will turn to protected
mode automatically. To relieve the protected mode just
charge the power bank.
The "IN" port is the charging port of the power bank. The
red LED will light on when charge the power bank, after
full charging, the red LED will light o.
1. Turn ON button
2. USB output port
3. DC5V input port

View the manual for the iconBIT FTB5200U here, for free. This manual comes under the category power banks and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the iconBIT FTB5200U or do you need help? Ask your question here

Need help?

Do you have a question about the iconBIT and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandiconBIT
ModelFTB5200U | FTB5200U
Productpower bank
LanguageEnglish
FiletypeUser manual (PDF)
Design
Charger compatibilityMobile phone/Smartphone, Tablet, MP3/MP4, GPS, E-book reader
LED indicatorsYes
Product colorWhite
Ports & interfaces
USB ports quantity1
Power
Input voltage5 V
Output voltage5 V
Output current1000 mA
Input current0.8 A
Performance
Battery capacity5200 mAh
Battery voltage3.7 V
Weight & dimensions
Width23.5 mm
Depth102 mm
Height23.5 mm
Weight120 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the iconBIT FTB5200U below.

What is the weight of the iconBIT FTB5200U?

The iconBIT FTB5200U has a weight of 120 g.

What is the height of the iconBIT FTB5200U?

The iconBIT FTB5200U has a height of 23.5 mm.

What is the width of the iconBIT FTB5200U?

The iconBIT FTB5200U has a width of 23.5 mm.

What is the depth of the iconBIT FTB5200U?

The iconBIT FTB5200U has a depth of 102 mm.

Is the manual of the iconBIT FTB5200U available in English?

Yes, the manual of the iconBIT FTB5200U is available in English .

Is your question not listed? Ask your question here

No results