ICOM IC-M330G manual

ICOM IC-M330G
9.6 · 2
PDF manual
 · 72 pages
English
manualICOM IC-M330G
42
8
MENU SCREEN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

AIS menu

Display (Default: ON)
Turns the AIS Display function ON or OFF when the
MR-1010RII is in Trasmitting (TX) mode.
• OFF: Turns OFF the AIS display.
• ON: Turns ON the AIS display.
NOTE: If an AIS target reaches the CPA and
TCPA limits when “OFF” is selected, this setting is
automatically turned ON.
Track (Default: OFF)
The plot displays the AIS target’s past positions as 5
dots,duringeachspeciedtrackinginterval.
You can specify the track interval in the “Track
Interval” item of the Target menu.
• OFF: Turns OFF the Track display function.
• ON: Turns ON the Track display function.
Name Display (Default: OFF)
Selects the AIS target display type.
• OFF: Does not display any name or MMSI
number of the target.
• Select: Displays the vessel name or MMSI
number of the selected target.
Active: Displays the vessel name or MMSI
number of all active targets.
Auto Activate (Default: ON)
The Auto Activate function automatically changes the
sleeping AIS target to an activated target when the
AIStargetisatthespecieddistanceandangle.
You can specify the distance and angle in the next
two items.
• OFF: Turns OFF the Auto Activate function.
• ON: Turns ON the Auto Activate function.
Auto Activate - Distance (Default: 1.0 NM)
Sets the distance to automatically changes the
sleeping AIS target to an activated target.
• 0.1 to 10.0 NM:
Select the distance from your vessel.
Auto Activate - Angle (Default: ±180°)
Sets the angle to automatically change the sleeping
AIS target to an activated target.
• 5 to 180°: Select the angle with your vessel.
New Target Warning (Default: OFF)
Sets whether the MR-1010RII gives a warning when
the Auto Activate function automatically changes the
sleeping AIS target to an activated target, or not.
• OFF: Does not give a warning when the Auto
Activate function activates the target.
• ON: Gives a warning when the Auto Activate
function activates the target.
Display Range (Default: 8.0 NM)
Sets the AIS targets display range to between 0.1
and 36.0 NM, or

.

• 0.1 to 36.0 NM: Select the range from your vessel in
0.1 NM steps.
: Displays all ranges from your
vessel.
Number of AIS (Default: 100)
Selects the maximum number of AIS targets that can
be displayed on the screen to between 10 and 100 in
1 target steps.
Slow Warn (Default: ON)
The AIS unit calculated Course Over Ground (COG)
data of a vessel that is at anchor or drifting is
unreliable, and therefore Closest Point of Approach
(CPA) and Time to CPA (TCPA) data may not be
correctly calculated. If a vessel is anchored in your
alarm zone, the unreliable data can cause the
collision alarm to sound many times, even if there is
no real danger. To prevent this, when the anchored
vessel’s Speed Over Ground (COG) is less than
this set value, the Slow Warn function assumes that
vessel’sCOGisxedtowardsyourvesselandan
alarm will sound.
• OFF: Turns OFF the Slow Warn function.
• ON: Turns ON the Slow Warn function.
Slow Warn Speed (Default: 0.1 kn)
• 0.1 to 5.0 kn: Selects the vessel’s speed in 0.1 kn
steps.

Manual

View the manual for the ICOM IC-M330G here, for free. This manual comes under the category radios and has been rated by 2 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the ICOM IC-M330G or do you need help? Ask your question here

Index

Need help?

Do you have a question about the ICOM and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
R
Richard BarbaresiMay 19, 2024

Where can I buy the manual

ICOM IC-M330G specifications

Below you will find the product specifications and the manual specifications of the ICOM IC-M330G.

The ICOM IC-M330G is a marine radio designed specifically for marine radio service. This radio features a built-in GPS satellite system, allowing users to accurately determine their position on the water. With an on/off switch, it offers convenient control for users to power the device as needed. In terms of dimensions, the IC-M330G has a width of 156.5 millimeters, a depth of 110.1 millimeters, and a height of 66.5 millimeters. It weighs approximately 730 grams, making it relatively lightweight for easy portability. The radio is equipped with a backlight display, ensuring visibility even in low-light conditions. The IC-M330G has a single antenna connector, allowing users to connect an external antenna if desired. It also carries an International Protection (IP) code of IPX7, indicating its resistance to water submersion up to a depth of 1 meter for 30 minutes. Key features of the ICOM IC-M330G include its GPS satellite system, on/off switch, compact dimensions, lightweight design, backlight display, and single antenna connector. These specifications make it suitable for marine applications, providing users with reliable communication and navigation capabilities while out on the water. To sum up, the ICOM IC-M330G is a marine radio that combines the functionality of a radio with the convenience of built-in GPS technology. With its compact and lightweight design, it enables users to communicate and navigate effectively in marine environments.

General
BrandICOM
ModelIC-M330G | IC-M330G
Productradio
LanguageEnglish
FiletypeUser manual (PDF)
Performance
PurposeMarine Radio Service
- channels
Operating frequency156.025 - 163.275 MHz
Maximum range- m
Ports & interfaces
GPS (satellite)Yes
Number of antenna connectors1
Antenna connector typeSO-239
Technical details
Product colorWhite
On/off switchYes
International Protection (IP) codeIPX7
Weight & dimensions
Width156.5 mm
Depth110.1 mm
Height66.5 mm
Weight730 g
Display
Backlight displayYes
Packaging content
ManualYes
Operational conditions
Operating temperature (T-T)-20 - 60 °C
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the ICOM IC-M330G below.

What is the weight of the ICOM IC-M330G?

The ICOM IC-M330G has a weight of 730 g.

What is the difference between FM and AM?

FM stands for Frequency Modulation and AM stands for Amplitude Modulation. The biggest difference between FM radio stations compared to AM radio stations is the sound quality.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

How can I best clean my radio?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the height of the ICOM IC-M330G?

The ICOM IC-M330G has a height of 66.5 mm.

What is the width of the ICOM IC-M330G?

The ICOM IC-M330G has a width of 156.5 mm.

What is the depth of the ICOM IC-M330G?

The ICOM IC-M330G has a depth of 110.1 mm.

How do I turn on the IC-M330G radio?

To turn on the IC-M330G radio, simply press and hold the Power button until the display lights up.

How can I adjust the volume on the IC-M330G radio?

To adjust the volume on the IC-M330G radio, rotate the Channel Selector knob clockwise to increase the volume and counterclockwise to decrease it.

How can I change the channel on the IC-M330G radio?

To change the channel on the IC-M330G radio, simply rotate the Channel Selector knob to select the desired channel number or use the Up/Down buttons to move through the available channels.

How can I switch between different frequency bands on the IC-M330G radio?

To switch between different frequency bands on the IC-M330G radio, press the Band button to toggle between the available options, such as VHF and UHF.

How do I transmit a message using the IC-M330G radio?

To transmit a message using the IC-M330G radio, press and hold the Push-To-Talk (PTT) button located on the microphone, speak clearly into the microphone, and release the PTT button when you finish speaking.

Does the ICOM IC-M330G have GPS?

Yes, the ICOM IC-M330G has a GPS feature. This allows the user to accurately determine their location while on the water, providing added safety and convenience.

Does the ICOM IC-M330G have an on/off switch?

Yes, the ICOM IC-M330G is equipped with an on/off switch. This allows for easy control and power management of the radio.

Does the ICOM IC-M330G have a backlight display?

Yes, the ICOM IC-M330G features a backlight display. This ensures visibility and readability in various lighting conditions, enhancing user convenience and usability.

How many antenna connectors does the ICOM IC-M330G have?

The ICOM IC-M330G has one antenna connector. This is sufficient for most marine radio applications and ensures reliable signal transmission.

What is the IP code of the ICOM IC-M330G?

The ICOM IC-M330G has an IPX7 rating, indicating it is protected against the effects of immersion in water up to a depth of 1 meter for up to 30 minutes. This high level of water resistance makes it suitable for use in demanding marine environments.

Is the manual of the ICOM IC-M330G available in English?

Yes, the manual of the ICOM IC-M330G is available in English .

Is your question not listed? Ask your question here

No results