Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Öl- und Filterwechsel

Das Hydrauliköl und die Filter müssen alle 250
bis 750 Betriebsstunden oder einmal jährlich
(je nach verwendetem Öltyp) gewechselt
werden. Unter Qualizierte Hydrauliköle im
Abschnitt „Schmierung“ nden Sie eine Liste der
genehmigten Öle, oder siehe Getriebehersteller
im Servicehandbuch.
Aufgrund des Risikos von Unreinheiten, die in
das System gelangen, müssen alle Arbeiten am
Getriebe von einer autorisierten Servicewerkstatt
durchgeführt werden.
Folgender Vorgang wird bei eingebauten
Getrieben und mit dem Fahrzeug auf ebenem
Untergrund durchgeführt. Aktivieren Sie das
Pumpenentlastungsventil je Getriebe, und ziehen
Sie die Feststellbremse an.
1. Entfernen Sie Gras und andere
Verschmutzungen vom Gerät. Entfernen Sie
Verschmutzungen aus dem Filterbereich.
2. Entfernen Sie die Entlüftung/den Messstab.
3. Platzieren Sie eine Ölwanne (Durchmesser
12" (304,8 mm) oder mehr und Kapazität von
8 qt. (7,57 l)) unter dem Öllter.
4. Entfernen Sie die Filterschraube und
die O-Ring-Baugruppe mithilfe von
Steckschlüssel und Ratsche.
5. Entfernen Sie den Öllter mithilfe eines
starken Magneten oder einer Spitzzange.
6. Bauen Sie den neuen Filter ein.
7. Montieren Sie den Filterstopfen und
die O-Ring-Baugruppe. Ziehen Sie die
Filterschraube mit einem Drehmoment von
115–135 in/lbs (13–15,25 Nm) fest.
8. Wiederholen Sie diese Schritte auf der
gegenüberliegenden Seite.
9. Lassen Sie aus dem alten Öllter vor dem
Entsorgen das gesamte üssige Öl ab. Füllen
Sie Altöl in geeignete Behälter und entsorgen
Sie dieses gemäß der geltenden Vorschriften.
10. Füllen Sie das Getriebe mit Parker HT-1000
Getriebeöl oder einer anderen genehmigten
Hydrauliküssigkeit.
11. Der Füllstand sollte im kalten Zustand die
Unterseite der Entlüftung/des Messstabs
berühren.
12. Montieren Sie die Entlüftung/den Messstab
und ziehen Sie sie/ihn mit 18 bis 30 in./lbs
(2,0 bis 3,3 Nm) fest.
Getriebeentlüftung
Das Entlüftungsverfahren muss immer
angewendet werden, wenn das hydrostatische
System zur Wartung geönet wurde oder wenn
Öl nachgefüllt wurde.
Aufgrund der Auswirkungen von Luft
auf hydrostatische Antriebe muss das
System entlüftet werden. Bei Luft in einem
hydrostatischen System können folgende
Symptome auftreten:
Geräuschentwicklung.
Leistungsverlust nach kurzer Betriebsdauer.
Hohe Betriebstemperatur und übermäßige
Ölausdehnung.
Verkürzte Komponentenlebensdauer.
Stellen Sie vor dem Starten sicher, dass der
Ölfüllstand korrekt ist. Ist dies nicht der Fall, wie
zuvor beschrieben nachfüllen.
Führen Sie das Verfahren zunächst durch, wenn
die Fahrzeugräder den Boden nicht berühren.
Wiederholen Sie es anschließend unter normalen
Betriebsbedingungen.
Siehe Manueller Transport der Maschine
im Abschnitt Betrieb zum Einstellen der
Verbindungsumgehungen.
1. Lösen Sie die Bremse, sofern diese aktiviert ist.
2. Wenn die Umgehungsverbindungen
oen sind und dreht der Motor im
schnellen Leerlauf dreht, schieben Sie die
Richtungssteuerung langsam nach vorn und
nach hinten (fünf- oder sechsmal). Während
des Entlüftens fällt der Ölfüllstand.
3. Wenn die Umgehungsverbindungen
geschlossen sind und der Motor läuft,
bewegen Sie die Richtungssteuerung
langsam nach vorn und nach hinten (5 bis 6
Mal). Prüfen Sie den Ölfüllstand, und füllen
Sie nach dem Stoppen des Motors Öl nach.
4. Möglicherweise müssen Sie die Schritte 2
und 3 wiederholen, bis die gesamte Luft
vollständig aus dem System entfernt wurde.
Funktioniert der Hydraulikantrieb mit normaler
Geräuschentwicklung und wird dieser
bei normalen Drehzahlen vorwärts und
rückwärtsbewegt, gilt er als entlüftet.
5. Wenn das Fahrzeug zweimal verwendet
wurde, müssen Sie den Ölfüllstand bei kaltem
Motor prüfen und entsprechend anpassen.
70

SCHMIERUNG

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results