Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Allgemein

Ziehen Sie den Zündschlüssel ab, um
unbeabsichtigte Bewegungen während des
Schmierens zu vermeiden.
Beim Schmieren mit der Ölkanne muss die
Ölkanne mit Motoröl gefüllt sein.
Verwenden Sie beim Schmieren mit Fett nur
hochwertiges Molybdändisuldfett, sofern nicht
anders angegeben.
Für den täglichen Gebrauch muss die Maschine
zweimal pro Woche geschmiert werden.
Wischen Sie überschüssiges Schmierfett nach
dem Schmieren ab.
Es ist wichtig, dass kein Schmiermittel auf
die Riemen oder die Antriebsächen an den
Riemenscheiben gelangt. Wenn dies der Fall
ist, reinigen Sie diese mit Alkohol. Sollte der
Riemen auch nach der Reinigung noch rutschen,
muss er ersetzt werden. Benzin oder andere
Erdölprodukte dürfen zur Reinigung von Riemen
nicht verwendet werden.

Qualizierte Hydrauliköle

Wenn durchgehend Parker™ HT-1000-Öl
verwendet wird, müssen Öl und Filter alle 750
Betriebsstunden gewechselt werden.

Schmierplan

Wenn Castrol™ Syntec 5W-50, Amsoil AW ISO
68 oder Shell™ TTF-SB verwendet wird, müssen
Öl und Filter alle 500 Betriebsstunden nach dem
ursprünglichen Wechselintervall von 750 Stunden
gewechselt werden.
Wenn ein hochwertiges synthetisches Motoröl
mit der minimalen Viskositätsklasse von 15W40
verwendet wird, müssen Öl und Filter alle 250
Betriebsstunden nach dem ursprünglichen
Wechselintervall von 750 Stunden gewechselt
werden.
WICHTIGE INFORMATION Verwenden Sie
geringe Mengen Schmiermittel. Entfernen Sie
überschüssiges Schmiermittel, damit dieses
nicht in Kontakt mit den Oberächen von
Riemen oder Riemenscheibenantrieben kommt.
WARNUNG! Unter Druck stehendes
Hydrauliköl hat genügend Kraft, um die Haut
zu durchdringen und schwere Verletzungen
zu verursachen. Bei Verletzungen durch
austretende Flüssigkeit umgehend einen Arzt
aufsuchen. Wird die Verletzung nicht sofort
angemessen ärztlich behandelt, können schwere
Infektionen oder Reaktionen die Folge sein.
12/12 Jährlich
1/52 Jede Woche
1/365 Jeden Tag
Schmieren mit Fettpresse
Filterwechsel
Ölwechsel
Flüssigkeitsstandkontrolle

*

Erster Hydrauliköl- und
Filterwechsel nach 100 Stunden,
danach alle 400 Betriebsstunden
Motoröl alle 50 Stunden wechseln
68

SCHMIERUNG

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results