Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448
Schneidwerk.
Einbauen des Hauptriemens
HINWEIS: Informationen zum einfachen
Installieren des Hauptriemens nden Sie auf dem
Aufkleber am Schneidwerk.
1. Führen Sie den Riemen um die Rolle der
elektrischen Kupplung, die sich an der
Motorwelle bendet.
2. Führen Sie den Riemen nach vorn und oben
auf das Schneidwerk.
3. Legen Sie den Riemen um die
Riemenscheibe.
4. Legen Sie den Riemen um die feststehende
Riemenscheibe und die Spindelgehäuse.
5. Drücken Sie am Spannhebel nach innen,
und legen Sie den Riemen vorsichtig über
die feststehende Riemenscheibe. Wenn der
Riemen ordnungsgemäß verlegt ist, lösen Sie
langsam den Riemenscheibenarm, um den
Riemen zu spannen.
6. Stellen Sie sicher, dass der Riemenverlauf
dem Aufkleber am Schneidwerk entspricht
und dass der Riemen nicht verdreht ist.
7. Bringen Sie alle Abdeckungen wieder an.

Pumpenriemen

Die Antriebsriemenspannung kann eingestellt
werden. Die Spannfeder sollte auf eine Länge
zwischen 1,38 und 1,50 Zoll (35 und 38 mm)
komprimiert sein.
Austausch des Pumpenriemens
Stellen Sie den Mäher auf einer ebenen Fläche
ab. Aktivieren Sie die Feststellbremse, indem Sie
die Steuerhebel nach außen bewegen.
Ausbau des Riemens
Von der Oberseite des Mähwerks aus:
1. Entfernen Sie den Hauptriemen (siehe
Abschnitt zum Entfernen des Hauptriemens
in diesem Handbuch).
2. Klappen Sie den Sitz nach vorn, um auf die
Lüfterabdeckungen zuzugreifen. Bauen Sie
beide Lüfterabdeckungen aus.
Auf der Unterseite des Mähwerks:
3. Bauen Sie den Kupplungsanschlag aus, um
Zugang zum Riemen zu erhalten.
4. Lösen Sie die Muttern der Spannfeder an der
Augenschraube, um den Arm zu verschieben
und den Riemen zu entspannen.
5. Nehmen Sie den Riemen vom Motor und den
Pumpenriemenscheiben herunter. Heben Sie
den Riemen über die Oberseite der Lüfter.
Einbauen des Riemens
1. Ist die Pumpe nicht in der ausgefahrenen
Position verriegelt, wiederholen Sie Schritt 4
aus den vorherigen Anweisungen.
2. Schieben Sie den Riemen über die Lüfter,
und führen Sie ihn zwischen den Laufrollen
hindurch.
3. Platzieren Sie den Riemen auf der rechten
und der linken Laufrolle.
4. Legen Sie den Riemen auf die Motorrolle.
5. Installieren Sie den Kupplungsanschlag, und
ziehen Sie ihn an.
6. Stellen Sie den Riemenspanner ein, um
eine Federlänge von 1,38 bis 1,50 Zoll
(35–38 mm) zu erreichen.
7. Installieren Sie die Lüfterabdeckungen.
8. Bringen Sie den Schneidwerk-Riemen an.

Schneidmesser

VORSICHT! Die Messer sind scharf.
Bei der Arbeit die Hände mit Handschuhen
schützen und/oder die Messer mit
einem dicken Tuch umwickeln.
Die Messer müssen von einer
autorisierten Servicewerkstatt
geschärft werden.
Wenn Sie ein optimales Ergebnis erzielen
möchten, müssen die Klingen scharf und
unbeschädigt sein.
Durch Hindernisse verbogene oder beschädigte
Messer austauschen.
Lassen Sie die Werkstatt entscheiden, ob ein
Messer repariert/geschlien werden kann oder
65

WARTUNG

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results