Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448
Wartungsplan
Im Folgenden nden Sie eine Liste
der obligatorisch auszuführenden
Wartungsmaßnahmen am Gerät. Suchen
Sie für die Maßnahmen, die nicht in diesem
= In dieser Betriebsanleitung beschrieben
= Nicht in dieser Betriebsanleitung beschrieben

= Siehe Handbuch des Motorherstellers

1)
Erster Wechsel nach 8 bis 10 Stunden.
Beim Betrieb unter schwerer Belastung oder
bei hohen Umgebungstemperaturen alle
50 Stunden wechseln.
2)
Bei staubigen Arbeitsbedingungen öfter
reinigen und austauschen.
3)
Dies ist von einer Vertragswerkstatt auszuführen.
Bedienungshandbuch beschrieben sind, eine
autorisierte Kundendienstwerkstatt auf. Es wird
ein jährlicher Service durch eine autorisierte
Servicewerkstatt empfohlen, um die Maschine in
einem optimalen Betriebszustand zu halten und
für sicheren Betrieb zu sorgen.
Lesen Sie die Informationen unter Allgemeine
Wartung im Abschnitt Sicherheit.
WARNUNG! Vor Wartungsarbeiten oder
Einstellungen:
• Ziehen Sie die Feststellbremse an.
• Bringen Sie den Messerschalter in die
ausgeschaltete Stellung.
Bringen Sie den Zündschalter in die Stellung
OFF (Aus) und ziehen Sie den Zündschlüssel ab.
• Stellen Sie sicher, dass alle Messer und
beweglichen Teile zum Stillstand gekommen
sind.
WARTUNG
TÄGLICH
MINDESTENS
EINMAL PRO
JAHR
WARTUNGSINTERVALL
IN STUNDEN
VORHER NACHHER 25 50 100 300
PRÜFUNG
Einstellung der Feststellbremse

● ♦ ♦

Motorölstand (bei jedem
Auftanken)
Sicherheitssystem
Auf Kraftsto- und Öllecks
Auf Schäden
Auf lose Teile (Schrauben,
Muttern)
Auf Mähdeckbeschädigung
Reifendrücke

● ●

Akkuanschlüsse

● ●

REINIGEN
Kühllufteinlass des Motors

Unter dem Mähdeck
Rund um den Motor
Rund um Riemen und
Riemenscheiben

Kühllufteinlass des Motors
2)

Luftlter-Schaumvorlter
2)

Luftlter-Papierltereinsatz
2)

AUSSERDEM
Schalldämpfer/
Funkenunterdrückung untersuchen

♦ ♦

Motor und Messer starten und auf
ungewöhnliche Geräusche achten
Mähermesser
3)
schärfen oder
ersetzen.

61

WARTUNG

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results