Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Pedal für Schnitthöheneinstellung

Die gewünschte Schnitthöhe wird mit
dem Höhenstift eingestellt. Mit dem Pedal

Spureinstellung

Prüfen Sie den Luftdruck in beiden Hinterreifen,
wenn der Mäher nicht gerade läuft. Der
empfohlene Luftdruck in den Hinterreifen beträgt
15 psi (1 bar).
1. Spureinstellungen erfolgen mit den
Spureinstellschrauben.
2. Fahren Sie für die Vorab-Spureinstellung
die Maschine in ein oenes Gelände ohne
erkennbare Hindernisse wie z.B. ein leeres
Parkplatzgelände oder ein freies Feld.
3. Drehen Sie die Spureinstellschrauben so weit
wie möglich ein.
4. Drehen Sie die Spureinstellschrauben um
4 ganze Drehungen heraus. Mehr als vier
Drehungen können die Einheit beschädigen.
5. Maschine mit beiden
Bewegungssteuerungshebeln in der
vordersten Position bei Vollgas Probe
fahren. Drehen Sie die Spureinstellschraube
stufenweise auf der rechten Seite hinein, bis
die Maschine spürbar beginnt, nach rechts zu
driften.
6. Fahren Sie die Maschine weiterhin mit
beiden Bewegungssteuerungshebeln in
der vordersten Position bei Vollgas. Drehen
Sie die Spureinstellschraube auf der linken
Seite stufenweise hinein, bis die Maschine
geradeaus fährt.
für Schnitthöheneinstellung wird die
Schneidwerkanhebung gelöst, damit das
Schneidwerk in der ausgewählten Höhe platziert
werden kann.
Drücken Sie das Pedal für den Transport,
bis die Arretierung des Mähwerks in die
Transportposition (oben) einrastet.
WICHTIGE INFORMATION Für den Transport
müssen Sie das Schneidwerk stets in die
höchste Stellung bringen.

Hydraulik-Freigabehebel

Die Getriebeumgehungshebel müssen aktiviert
sein, wenn die Maschine geschoben oder
gezogen wird. Die Getriebe werden in den
Bypass-Modus gesetzt, indem die Hebel in die
horizontale Stellung gedreht werden. Die Bypass-
Hebel benden sich an den Vorderseiten von
beiden Getrieben. Siehe Manueller Transport
im Abschnitt Betrieb.

Kraftstotank

Lesen Sie die Sicherheitsanweisungen vor dem
Auftanken. Der Tank fasst 5 Gallonen (19 Liter).
Prüfen Sie die Tankdeckeldichtung regelmäßig
auf Schäden, und halten Sie den Deckel dicht.
Der Motor benötigt unverbleiten Kraftsto
mit mindestens 87 Oktan (kein Ölgemisch).
Umweltfreundlicher Alkylatkraftsto kann
verwendet werden. Siehe die technischen Daten
zu Ethanolkraftsto. Methanolkraftsto ist nicht
zulässig. Verwenden Sie keinen E85-Kraftsto.
Andernfalls können Motor und Komponenten
beschädigt werden.
Verwenden Sie bei Temperaturen unter 32 °F
frischen, wintertauglichen Kraftsto, um das gute
Startverhalten im Winter sicherzustellen.
55

BEDIENELEMENTE

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results