Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Messerschalter

Um das Schneidwerk zu aktivieren, ziehen
Sie den Schalter heraus. Die Messer werden
ausgeschaltet, wenn Sie diesen Schalter ganz
hineinschieben.

Betriebsstundenzähler

Der Betriebsstundenzähler zeigt die gesamte
Anzahl der Betriebsstunden des Motors an und
signalisiert, wann Motor und Mäher gewartet
werden müssen.
Nach jeweils 50 Betriebsstunden wird ein
Ölkannen-Symbol eingeblendet und bleibt für
zwei Stunden aktiviert, bevor eine automatische
Rückstellung durchgeführt wird. Um den
Zähler manuell zurückzusetzen, drehen Sie
den Zündschlüssel auf OFF (Aus) und dann
im Abstand von je einer Sekunde fünfmal auf
ON (Ein). Um den Motor und Mäher zu warten,
sehen Sie in das Wartungsjournal in dieser
Betriebsanleitung

Choke-Hebel

Der Choke-Hebel versorgt den Motor bei einem
Kaltstart mit einer fetteren Kraftstomischung.
Ziehen Sie beim Kaltstarten den Knopf heraus.
Hinweis: Der Betriebsstundenzähler ist nur in
Betrieb (zählt die Stunden), wenn der Motor läuft.
Stellen Sie sicher, dass Sie den Zündschlüssel
auf OFF (Aus) stellen, wenn die Maschine nicht
verwendet wird, damit sich die Betriebsstunden
nicht weiter ansammeln.

Sitzeinstellungshebel

(Gilt nur für Z400X)

Der Sitz ist in Längsrichtung einstellbar. Zum
Verstellen drücken Sie den Hebel vorn unter dem
Sitz nach links (von der Fahrerposition aus), und
schieben Sie den Sitz nach vorn oder hinten.
WICHTIGE INFORMATION Der Sitz darf nicht
verstellt werden, wenn das Gerät in Bewegung
ist.

Kraftstoabsperrventil

Das Kraftstoabsperrventil bendet sich vor der
hinteren Halterung des Kraftstotanks. Das Ventil
ist geschlossen, wenn der Hebel senkrecht zur
Kraftstoeitung gedreht wird.

Sicherungen

Die Sicherungen benden sich auf der rechten
Seite der Maschine und sind zugänglich, wenn
der Sitz nach vorn geneigt wird. Es werden
Flachstecksicherungen verwendet, wie sie auch
in Kraftfahrzeugen zum Einsatz kommen. Die
20-A-Sicherung ist die Hauptsicherung. Die
7,5-A-Sicherung ist für die Mähdeckkupplung.
54

BEDIENELEMENTE

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results