Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Reinigen

Als u de machine regelmatig reinigt, vooral onder
het maaidek, gaat hij langer mee. Reinig de
machine meteen na gebruik (nadat de machine is
afgekoeld), voordat het vuil vast gaat zitten.
Spuit geen water boven op het maaidek. Gebruik
perslucht om de bovenkant van het maaidek
te reinigen. Gebruik geen hogedrukspuit of
stoomreiniger. Spuit geen water op de motor en
elektrische onderdelen.
Reinig de onderkant van het dek regelmatig
met water onder normale druk. Spoel hete
oppervlakken niet af met koud water. Laat de
machine afkoelen voordat u deze reinigt.
VOORZICHTIG! Draag altijd
oogbescherming tijdens het reinigen
en wassen.

Bevestigingsmateriaal

Controleer dit elke dag. Inspecteer de volledige
machine op losse of ontbrekende hardware.

Zwenkwielen

Controleer ze elke 200 uur. Controleer of de
wielen vrij kunnen draaien. Met schuim gevulde
banden of massieve banden maken de garantie
ongeldig.
Wilt u een wiel vervangen, verwijder dan de moer
en de zwenkwielbout. Trek het wiel uit de arm
en let op het afstandsstuk. Voer de installatie
uit in de omgekeerde volgorde. Draai de
zwenkwielbout vast en haal deze aan tot 61 Nm.
OPMERKING: Het wiel moet vrij draaien, maar
de asafstandsstukken niet. Als de wielen niet vrij
kunnen draaien, ga dan met de machine naar de
dealer voor onderhoud.

Anti-scalp-rollen

De anti-scalp-rollen zijn goed afgesteld als ze
iets van de grond staan wanneer het maaidek
op de gewenste maaihoogte staat. Anti-scalp-
rollen zorgen dat het maaidek in de juiste positie
blijft en scalperen op de meeste soorten terrein
wordt voorkomen. Stel de rollen niet af om het
dek te ondersteunen. De rollen moeten zich op
ongeveer 6,5 mm van de grond bevinden.
BELANGRIJKE INFORMATIE Stel de
anti-scalp-rollen af terwijl de maaier op een
vlakke ondergrond staat. De antiscalprollen
mogen niet afgesteld worden om het dek te
ondersteunen, om schade aan het dek te
vermijden.
227

ONDERHOUD

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results