Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Pompriem

De spanning van de transmissie-aandrijfriem
is verstelbaar. De spanveer moet worden
samengedrukt tot een lengte tussen 35 en 38
mm.
De pompriem vervangen
Parkeer de maaier op een vlakke ondergrond.
Schakel de parkeerrem in door de stuurregelaars
naar buiten te bewegen.
De riem verwijderen
Vanaf de bovenkant van het dek:
1. Verwijder de maaidekriem (zie Maaidekriem
verwijderen in dit hoofdstuk van de
handleiding).
2. Kantel de stoel naar voren om bij de
afdekkappen van de ventilatoren te komen.
Verwijder beide afdekkappen voor de
ventilatoren.
Aan de onderkant van de maaier:
3. Verwijder de koppelingsstop om toegang te
krijgen tot de riem.
4. Draai de spanveermoeren op de oogbout los
om de arm te verplaatsen en speling in de
riem te creëren.
5. Haal de riem van de motor- en de
pomppoelies. Til de riem over de bovenkant
van de ventilatoren.
De riem installeren
1. Als de pomp niet in de uitgeschoven stand
is vergrendeld, herhaal dan stap 4 uit de
bovenstaande instructies.
2. Schuif de riem over de ventilatoren en leid
hem tussen de geleidepoelies.
3. Plaats de riem over de geleidepoelies rechts
en links.
4. Plaats de riem op de motorpoelie.
5. Plaats de koppelingsstop en draai deze vast.
6. Stel de spanner van het stangenstelsel van
de aandrijfriem af om een veerlengte tussen
35 en 38 mm te verkrijgen.
7. Breng de afdekkappen voor de ventilatoren
aan.
8. Breng de maaidekriem riem aan.

Maaibladen

VOORZICHTIG! De messen zijn scherp.
Bescherm uw handen met handschoenen en/
of wikkel de bladen in een stevige
doek wanneer u ze hanteert.
Het slijpen van messen moet
worden uitgevoerd door een erkende
servicewerkplaats.
Het is belangrijk dat de bladen geslepen en
onbeschadigd zijn voor het beste maairesultaat.
Vervang bladen die gebogen of gebarsten zijn bij
het raken van obstakels.
Laat de servicewerkplaats beoordelen of een
mes met grote deuken kan worden gerepareerd/
geslepen of moet worden vervangen. Balanceer
de bladen uit na het slijpen.
Controleer de bladhouders.
Vervangen van de bladen
1. Verwijder de mesbout door deze linksom te
draaien.
2. Monteer een nieuw of geslepen blad met
de tekst 'GRASZIJDE' in de richting van de
grond of het gras (omlaag) of 'DEZE KANT
BOVEN' in de richting van het maaidek en het
maaihuis.
3. Breng de bladbout aan en draai deze vast, op
de juiste wijze.
4. Haal de bladbout aan met een
aanhaalmoment van 61-75 Nm.
BELANGRIJKE INFORMATIE De speciale
bladbout heeft een warmtebehandeling
ondergaan. Vervang deze waar nodig
door een bout van Husqvarna. Gebruik
geen hardware van mindere kwaliteit dan
opgegeven.
225

ONDERHOUD

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results