Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448
Lees het deel Veiligheid en de volgende pagina's
als u niet bekend bent met de machine.

Opleiding

Zero-turn-maaiers zijn veel wendbaarder
dan gewone zitmaaiers vanwege hun unieke
stuurcapaciteiten.
Lees dit hoofdstuk volledig door voordat u de
maaier op eigen kracht probeert te verplaatsen.
Wanneer u de maaier voor het eerst gebruikt
of tot u zich de bedieningen eigen heeft
gemaakt, dient u een lage gassnelheid en een
lage grondsnelheid te gebruiken. Beweeg de
besturingshendels NIET in de uiterste standen
naar voren of naar achteren tijdens het eerste
gebruik.
Gebruikers die voor het eerst met een maaier
werken moeten eerst de bewegingen van de
maaier op een hard oppervlak leren kennen,
bijvoorbeeld op beton of asfalt, VOORDAT ze
de machine op grond proberen te gebruiken.
Tot de gebruiker weet hoe de regelaars van de
maaier en de mogelijkheid om rond de eigen as
te draaien werken, kan de gebruiker de grasmat
beschadigen door te agressieve manoeuvres.

Stuurinrichting

Vooruit- en achteruitrijden
De richting en snelheid van de bewegingen van
de maaier worden geregeld door de beweging
van de besturingshendel(s) aan beide kanten
van de maaier. Met de linkerregelaar wordt het
linkerwiel geregeld. Met de rechterregelaar wordt
het rechterwiel geregeld.
Gebruikers die deze machine voor het eerst
gebruiken, moeten de maaier naar een open,
vlak gebied duwen, waar geen andere mensen,
voertuigen of obstakels in de buurt zijn (zie
De machine met de hand verplaatsen in het
hoofdstuk Bediening). Om de machine op eigen
vermogen te laten draaien, moet de gebruiker
op de stoel gaan zitten en de motor starten (zie
Voor het starten in het hoofdstuk Bediening).
Laat de motor met stationair toerental draaien,
maar schakel de messen nog niet in. Trek
de besturingshendels naar binnen. Als de
besturingshendels nog niet naar voren of naar
achteren zijn gezet, beweegt de maaier niet.
Beweeg de twee besturingshendels voorzichtig
iets naar voren. Zo begint de maaier in een
rechte lijn naar voren te bewegen. Trek de
stuurregelaars terug naar de neutrale positie om
de maaier te laten stoppen met bewegen.
Naar links draaien
Trek terwijl de machine naar voren beweegt de
linkerhendel naar achteren naar de neutrale
positie, terwijl de rechterhendel in dezelfde stand
blijft; het linkerwiel gaat langzamer draaien,
waardoor de machine in die richting draait.
Op de plek draaien
Trek terwijl de machine vooruit rijdt eerst de
twee besturingshendels naar achteren totdat de
maaier stopt of bijna stopt.
Als u dan één hendel iets naar voren en de
andere hendel naar achteren zet, maakt u de
draai af.

Rolstang

Bedien de machine met de rolstang in de
omhoogstaande en vergrendelde positie
en gebruik de veiligheidsgordel. Er is geen
kantelbeveiliging als de rolstang omlaag staat.
Als het noodzakelijk is om de rolstang omlaag te
zetten, draai de veiligheidsgordel dan niet. Zet de
rolstang zodra dit mogelijk is omhoog.
WAARSCHUWING! De veiligheidsgordel
moet worden gebruikt als de rolstang omhoog
staat.
WAARSCHUWING! Zorg ervoor dat
het werkterrein vrij is van stenen of andere
voorwerpen die door de draaiende messen
kunnen worden weggeslingerd.

Voordat u begint

1. Lees de hoofdstukken Veiligheid en
Bedieningselementen voordat u de machine
gaat starten.
2. Voer voordat u start altijd het dagelijkse
onderhoud uit (zie heOnderhoudsschema in
het hoofdstuk Onderhoud).
3. Controleer of er voldoende brandstof
aanwezig is in de brandstoftank.
4. Stel de stoel in op de gewenste stand.
Trek de besturingshendels iets naar achteren,
waardoor de maaier naar achteren gaat
bewegen. Duw de stuurregelaars naar voren
naar de neutrale positie om de maaier te laten
stoppen met bewegen.
Naar rechts draaien
Trek terwijl de machine naar voren beweegt de
rechterhendel naar achteren naar de neutrale
positie, terwijl de linkerhendel in dezelfde positie
blijft; het rechterwiel gaat langzamer draaien,
waardoor de machine in die richting draait.
217

BEDIENING

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results