Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Nippli di ingrassaggio di ruote e piatto

Usare solo grasso per cuscinetti di buona qualità.
Il grasso di marchi noti (società petrolchimiche,
ecc.) solitamente è di buona qualità.
Supporto ruota anteriore
Lubricare con 3 - 4 applicazioni con una pistola
ingrassatrice su ciascuna serie di supporti delle
ruote.
Cuscinetti della ruota anteriore
Lubricare con 3 - 4 applicazioni con una pistola
ingrassatrice su ciascuna serie di cuscinetti delle
ruote.
Alberini del piatto
Abbassare completamente il piatto di taglio.
Se viene usata una pistola ingrassatrice senza
tubo di gomma, per accedere all'alberino centrale
è necessario rimuovere la piastra inferiore.
Lubricare con una pistola ingrassatrice, 2 - 3
applicazioni per alberino.

Cambio dell'olio motore

NOTA: Cambiare l'olio motore quando il motore
è caldo. Fare riferimento al manuale di istruzioni
del motore per le raccomandazioni relative all'olio
corretto e alla sostituzione del ltro.
AVVERTENZA! Il tappo di drenaggio
del motore si trova vicino alla marmitta. Per
evitare ustioni, il motore deve essere spento e
lasciato rareddare leggermente in modo che
sia ancora caldo, ma le superci circostanti e
l'olio non lo siano.
1. Posteggiare su una supercie pianeggiante.
Inserire il freno di stazionamento.
2. Pulire le tracce di sporcizia e detriti dall'area
intorno al tappo di rifornimento dell'olio.
3. Rimuovere il tappo/asta di livello.
4. Individuare il tubo di scarico sul lato
posteriore destro del motore. Collocare un
contenitore di dimensioni sucienti sotto
l'estremità del tubo di scarico e rimuovere il
tappo di drenaggio dell'olio.
5. Lasciar scaricare completamente l'olio usato
dal motore.
6. Sostituire e serrare il tappo del tubo essibile
di scarico.
7. Riempire il motore con olio nuovo no al
fondo della lettatura del tubo di riempimento.
Controllare il livello dell'olio tramite l'asta di
livello.
8. Riposizionare e serrare il tappo di
rifornimento dell'olio stringendolo quando
il livello dell'olio raggiunge il segno "FULL"
(pieno).
9. Per smaltire l'olio usato, fare riferimento alle
normative locali sullo smaltimento.
10. Fare riferimento al Registro di assistenza per
gli intervalli di controllo e cambio dell'olio e le
raccomandazioni sulla sostituzione.
189

LUBRIFICAZIONE

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results