Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448
6. Assicurarsi che l'instradamento della cinghia
corrisponda alla decalcomania sul piatto e
che la cinghia non sia attorcigliata.
7. Rimontare tutte le protezioni delle cinghie.

Cinghia della pompa

La tensione della cinghia di trasmissione è
regolabile. La molla di tensionamento deve
essere compressa a una lunghezza compresa tra
1,38 e 1,50 pollici (35 mm e 38 mm).
Sostituzione della cinghia della pompa
Posteggiare il rasaerba su una supercie piana.
Inserire il freno di stazionamento spostando i
comandi dello sterzo verso l'esterno.
Rimozione della cinghia
Dal lato superiore del piatto:
1. Rimuovere la cinghia del piatto (vedere
Rimozione della cinghia del piatto in
questa sezione del manuale).
2. Inclinare il sedile in avanti per accedere ai
carter della ventola. Rimuovere entrambi i
carter.
Da sotto il tagliaerba:
3. Togliere il fermo della frizione per accedere
alla cinghia.
4. Allentare i dadi delle molle di tensionamento
sul golfare per spostare il braccio e creare
gioco nella cinghia.
5. Rimuovere la cinghia dal motore e dalle
pulegge della pompa. Sollevare la cinghia
sopra la parte superiore delle ventole.
Installazione della cinghia
1. Se la pompa non è bloccata in posizione
estesa, ripetere il punto 4 delle precedenti
istruzioni.
2. Inserire la cinghia sulle ventole e farla
passare tra le pulegge del galoppino.
3. Collocare la cinghia sulla puleggia del
galoppino destra e sinistra.
4. Avvolgere la cinghia attorno alla puleggia del
motore.
5. Montare e serrare il fermo della frizione.
6. Regolare il tenditore della tiranteria della
cinghia di trasmissione per ottenere una
lunghezza della molla compresa tra 1,38 e
1,50 pollici (35 mm e 38 mm).
7. Installare le protezioni della ventola.
8. Montare la cinghia del piatto di taglio.

Dischi di taglio

ATTENZIONE! Le lame sono alate.
Proteggere le mani con guanti e/o avvolgere
le lame con un panno spesso durante la
manipolazione.
L'alatura delle lame deve essere
eseguita da un'ocina di assistenza
autorizzata.
Per avere i migliori risultati di taglio, è importante
che le lame siano ben alate e non danneggiate.
Sostituire le lame che si sono piegate o crepate
urtando contro eventuali ostacoli.
L'ocina di assistenza ha la competenza per
decidere se la lama con scheggiature di grandi
dimensioni può essere riparata/retticata o
deve essere sostituita. Bilanciare le lame dopo
l'alatura.
Controllare i supporti delle lame.
Sostituzione della lama
1. Rimuovere il bullone della lama ruotandolo in
senso antiorario.
2. Installare la lama nuova o rialata con
la scritta "GRASS SIDE" rivolta verso il
terreno/l'erba (in basso) o con il lato con la
scritta "THIS SIDE UP" rivolto verso il piatto e
l'alloggiamento del tagliente.
3. Montare e serrare correttamente il bullone
della lama.
4. Serrare il bullone della lama a 61-75 Nm
(45-55 ft/lb).
185

MANUTENZIONE

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results