Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Embouts de graissage Zerk pour les

roues et l'unité

Utilisez uniquement une graisse pour roulement
de bonne qualité. La graisse de marques
connues (compagnies pétrochimiques, etc.) est
généralement de bonne qualité.
Support des roues avant
Lubriez 3-4 coups avec un pistolet à graisse sur
chaque ensemble de supports de roue.
Roulements des roues avant
Lubriez 3-4 coups avec un pistolet à graisse sur
chaque roulement de roues.
Tiges de l'unité
Baissez complètement l'unité de coupe.
Si vous utilisez un pistolet à graisse sans tuyau
en caoutchouc, retirez le repose-pied pour
accéder à la tige centrale.
Lubriez avec un pistolet à graisse, 2-3 coups
par tige.

Remplacement de l'huile et des ltres

L'huile hydraulique et les ltres doivent être
remplacés toutes les 250 à 750 heures ou une
fois par an, selon le type d'huile utilisé. Voir
Huiles hydrauliques qualiées dans la section
Lubrication pour obtenir la liste des huiles
homologuées ou voir le manuel d'entretien du
fabricant de la transmission.
En raison du risque d'impuretés dans le système,
tous les travaux de transmission doivent être
eectués par un atelier d'entretien agréé.
Suivez la procédure ci-après quand les

Vidange de l'huile moteur

REMARQUE : Vidangez l'huile moteur lorsque
le moteur est chaud. Reportez-vous au manuel
d'utilisation du moteur pour les recommandations
de vidange d'huile et de remplacement du ltre.
AVERTISSEMENT ! Le bouchon
de vidange du moteur est situé près du
silencieux. Pour éviter de vous brûler, coupez
le moteur et laissez-le refroidir un peu de
manière à ce que le moteur reste chaud mais
que les surfaces environnantes et l'huile ne le
soient pas.
1. Garez la tondeuse sur une surface plane.
Serrez le frein de stationnement.
2. Nettoyez la saleté et les débris de la zone
autour du bouchon de remplissage d'huile.
3. Enlevez le bouchon/la jauge.
4. Localisez le tuyau de vidange du côté arrière
droit du moteur. Placez un récipient de
taille adéquate sous l'extrémité du tuyau de
vidange et retirez le bouchon de vidange
d'huile.
5. Laissez l'huile usagée s'écouler
complètement du moteur.
6. Remplacez et serrez le bouchon du tuyau de
vidange.
7. Remplissez le moteur d'huile neuve jusqu'au
bas des lets du tube de remplissage.
Contrôlez le niveau d'huile sur la jauge.
8. Replacez et serrez le bouchon de
remplissage d'huile lorsque le niveau d'huile
est PLEIN.
9. Pour mettre l'huile usagée au rebut, reportez-
vous à la réglementation locale relative à la
mise au rebut.
10. Reportez-vous au journal d'entretien pour
savoir à quelle fréquence vérier et vidanger
l'huile et pour obtenir des recommandations.
149

LUBRIFICATION

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results