Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448
REMARQUE : Pour faciliter l'installation de la
courroie du plateau, référez-vous à l'autocollant
situé sur le haut du plateau.
1. Enroulez la courroie du plateau autour de la
poulie de l'embrayage électrique située sur
l'arbre du moteur.
2. Diriger la courroie vers l'avant et vers le haut
sur le plateau.
3. Enroulez la courroie autour de la poulie folle.
4. Enrouler la courroie tout autour de la poulie
guide stationnaire puis autour des boîtiers de
mandrin.
5. Poussez vers l'intérieur sur le bras de renvoi
et installez délicatement la courroie par-
dessus la poulie folle stationnaire. Une fois
la courroie correctement installée, relâchez
lentement le bras de renvoi pour tendre la
courroie.
6. Assurez-vous que le cheminement de la
courroie correspond à l'autocollant du plateau
et que la courroie n'est pas tordue.
7. Reposez toutes les protections de courroie.

Courroie de pompe

La tension de la courroie d'entraînement des
transmissions est réglable. Le ressort de tension
doit être comprimé à une longueur comprise
entre 1,38 et 1,50 pouce.
Remplacement de la courroie de pompe
Garez la tondeuse sur une surface plane. Serrez
le frein de stationnement en déplaçant les
commandes de direction vers l'extérieur.
Retrait de la courroie
À partir du haut de l'unité :
1. Retirez la courroie du plateau (voir Dépose
de la courroie du plateau dans la présente
section du manuel).
2. Inclinez le siège vers l'avant pour accéder
aux capots de ventilateurs. Retirez les deux
capots.
À partir du dessous de la tondeuse :
3. Retirez l'arrêt d'embrayage pour accéder à la
courroie.
4. Desserrez les écrous du ressort de tension
sur le boulon à œil pour déplacer le bras et
créer du mou dans la courroie.
5. Enlevez la courroie des poulies de moteur et
de pompe. Soulevez la courroie au-dessus
des ventilateurs.
Installation de la courroie
1. Si la pompe n'est pas bloquée en position
tendue, répétez l'étape 4 des instructions ci-
dessus.
2. Faites passer la courroie au-dessus les
ventilateurs et entre les poulies folles.
3. Placez la courroie sur les poulies folles droite
et gauche.
4. Placez la courroie sur la poulie moteur.
5. Posez et serrez la butée d'embrayage.
6. Réglez le tendeur de tringlerie de la courroie
d'entraînement pour obtenir une longueur de
ressort comprise entre 35 et 38 mm(1,38 à
1,50 pouce).
7. Réinstallez les protections de ventilateurs.
8. Installez la courroie du plateau.

Disques découpeurs

MISE EN GARDE ! Les lames sont
aûtées. Portez des gants de protection et/ou
enveloppez les lames d'un tissu épais
pour la manipulation.
L'aûtage des lames doit être réalisé
dans un atelier d'entretien agréé.
Pour obtenir les meilleurs résultats possibles
avec la tondeuse, il est important que les lames
soient bien aûtées et qu'elles ne soient pas
endommagées.
Remplacez les lames si elles ont été tordues ou
ssurées après avoir heurté des obstacles.
L'atelier d'entretien vous dira si une lame
fortement endommagée peut être réparée/
aiguisée ou si elle doit être remplacée. Équilibrez
les lames après l'aûtage.
145

ENTRETIEN

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results